psycmos

I have not using i915.alpha_support=1 and i have modprobe i915 in go script, with permissions. It works good at version until unraid 6.6.7 and was broken in 6.7.x. If i downgrade unraid to 6.6.7 with same configs, it start working...

Hi mgoodings, i have purchased the unraid and i can confirm that's not works on any version after update 6.6.7. No other version above 6.6.7 with transcoding working. I downgrade to 6.6.7 and waiting for support...

I can confirm that's happen in TVheadend too, not only in Plex. I think its related with Unraid,l and not with dockers.

Great We will wait for news!

I Unraid Devs. After update 6.6.6 to 6.7.X many user lose the IGPU transcoding ability. I tested it at 6.7.2 and it are not working too. Were i can report this for Unraid Dev Team? Best Regards, Nuno

How can we report this for Unraid team? I have not reported it ...

I can confirm that's an Unraid issue because other topics that's are opened at this forum. My setup is J4105M (Board with processor). _______________________________________________________________________________ My Configs for transcoding at TVheadend: syslinux.cfg: label unRAID OS menu default kernel /bzimage append pci=realloc=off initrd=/bzroot At file Flash/Config/GO i used #Setup drivers for hardware transcoding modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & In DOCKER TVHEADEND use [ --device=/dev/dvb --device=/dev/dri:/dev/dri] under extra parameters _______________________________________________________________________________________ I can see the device i915 v1.6.0 (/dev/dri/renderD128). I think i will move this issue to General support because other users report this too in Unraid 6.7 About unraid logs, how can i get it?

I have the same issue in TVheadend with unraid 6.7. Transcoding not working too. I'm using one J4015M board and i lost transcoding after update from Unraid 6.6.6 to 6.7 ( 6.7.1 RC1 / 6.7.2 Rc2 have the same issue.), i reverted back to 6.6.6 and it are working again. So is confirmed that's an Unraid issue, not from Docker conteiners.( TVH and Plex) How cen we try find what are causing it? Best Regards, psycmos

Sorry, i'm using TVheadend but i found other reports with plex saying the same issue like me in TVH after update to 6.7. To get transcoding working again in TVH i need revert back to unraid 6.6.6 and it comes working again. I found it interesting to share PLEX too, to report that not happen only in TVH

I updated to Unraid 6.7 but i lost transcoding. So i revered back to Unraid 6.6.6 and now are working good again. So, somebody can give me the best place to report that issue? Others user with PLEX are reporting the same issue in newer version of unraid 6.7 ( Transcoding with VAAPI not working). https://forums.plex.tv/t/cant-get-plex-hw-transcoding-to-work-with-docker-unraid-6-7-0/424489/2

I have the same device and it are working good.

Hi CHBMB You think there are any possibility to include this? I think this patch can solve the issue in DVB-C frequencies. Best Regards

Hi @CHBMB i have this tunner: Astrometa DVB-T2 USB( MN88473 /Realtek RTL2832P - 2014 revision ) DVB-C/T You think is possible to add this fix for libreelec DVB drivers release ? DVB patch for tunner. r820t.patch (365 Bytes) I think that release have this fix too. Linux source code: drivers/media/tuners/r820t.c (v5.1.1) - Bootlin linux/r820t.c at master · torvalds/linux · GitHub

Thanks CHBMB. i will keep reporting tests only about DVB drivers

Sorry for talking about TVH in this topic. I will not do it here anymore

Works good, but i reverted back because, TVH transcoding are not working yet in this build thank you so much

i will test it now!!

Thanks a lot for your info memphisto DVBSky T330 working PERFECT NOW!!! I download And Used the Libreelec version! Thanks for support @alturismo and @memphisto

What version of DVB edition you are runnnig? 6.6.6v2 above? And what release ( Libreelec, TBS or Crazycat)? Thanks for your feedback, so here will work good to! Good News!

Thanks a lot for your reply. I know that the purpose of this topic is different than here wrote . So, i will use tvheadend docker thread. But your help was very important to me Now, i have the transcoding h264, working inside tvheadend docker. Removed the alpha support too. Yes. Using libreelec-SKY at VM i can run TVH inside seperate from docker. DVB USB TUNNER inside libreelec works (with very continuous errors). Sometimes is good because i have only 10Mgbit upload... ;( I'll follow your advice Know i only have one issue, dvb device wich has continue errors on running on TVH inside libreelec VM are recognized at docker, but not scan. It can't detect any signal, and i think this come from unRAID DVB Edition, because passtrounth to docker not works, and at VM tuner works. I will try other drives from 6-6-6v2. I'm using (tbs-crazy-dvbst), and will report. Thanks a lot for help me, and for this great work, unRAID DVB Edition Cheers.

Hi alturismo. i Think the problem come from USB unraid passthrough. (Some Usb bluetooth dongle and wifi have problems too). At begin i used the unRAID DVB Edition, for passthrough of USB DVB to VM, because is the only way to view it on unraid. Without DVB edition, i can't see the USB at VM config for easy passthrough. Now, i know that i can passthrough the USB controller to VM using vfio-pci.ids, but the problem is, that it not work for usb ( inserted correct usb ids and it not do nothing). I think it's caused, because USB IDs are at same controller of PCI USB CONTROLLER, and are used by UNRAID USB flash. I bought one PCI-e 2-Port USB 3.0 HUB, for plug USB DVB to this Extender PCI and passthrough all PCI device usb controller via vfio-pci.ids. Maybe it will solve my Continuity Errors in tunner USB DVBSky T330. I tested unRAID DVB Edition 6-6-6v2 (tbs-crazy-dvbst), with tvheadend docker and use the dvb devices like /dev/dvb/ I have my 2 tunners recognized ok PCI DVBS2 works good ( scan and no errors) USB DVB T330 not scan. I found other issue is the DOCKER TVHEADEND transcoding I have one ASROCK J4105M BOARD and using VM Libreelec http://sky42.libreelec.tv/release/8.2/3.x/Generic/ i can transcoding correct with version .112 of tvheadend. (version .113 transcoding give me passthrough video without transcod) So i try transcoding via docker using vaapi and saw one guide for PLEX server and did the same: syslinux.cfg: label unRAID OS menu default kernel /bzimage append pci=realloc=off initrd=/bzroot i915.alpha_support=1 At file Flash/Config/GO i used #Setup drivers for hardware transcoding in Plex modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & In DOCKER TVHEADEND used --device=/dev/dri:/dev/dri under extra parameters or I added a device to the container with a value of /dev/dri:/dev/dri But not works, i have this error: 2018-12-29 11:07:53.034 subscription: 001C: "HTTP" subscribing on channel "Feeds 2 TSA", weight: 100, adapter: "Montage Technology M88RS6000 #0 : DVB-S #0", network: "DVBs", mux: "10890V", provider: "TSA", service: "Feeds 2 TSA", profile="webtv-h264-aac-mpegts", hostname="192.168.1.20", client="VLC/3.0.4 LibVLC/3.0.4" 2018-12-29 11:07:54.341 transcode: 0001: 01:MPEG2VIDEO: ==> Using profile webtv-h264 2018-12-29 11:07:54.342 transcode: 0001: 02:MPEG2AUDIO: ==> Using profile webtv-aac 2018-12-29 11:07:54.342 transcode: 0001: 03:MPEG2AUDIO: ==> Filtered out 2018-12-29 11:07:55.347 transcode: 0001: 02:AAC: [mp2 => aac]: Detected framedrop in audio (23040 != 25200) 2018-12-29 11:07:55.400 transcode: no HWAccel for the pixel format 'vdpau_mpeg2' 2018-12-29 11:07:55.477 libav: AVCodecContext: Error setting profile 0. 2018-12-29 11:07:55.477 libav: AVCodecContext: Possible profiles: 2018-12-29 11:07:55.477 libav: AVCodecContext: baseline 2018-12-29 11:07:55.477 libav: AVCodecContext: main 2018-12-29 11:07:55.477 libav: AVCodecContext: high 2018-12-29 11:07:55.477 libav: AVCodecContext: high10 2018-12-29 11:07:55.477 libav: AVCodecContext: high422 2018-12-29 11:07:55.477 libav: AVCodecContext: high444 2018-12-29 11:07:55.477 libav: AVCodecContext: 2018-12-29 11:07:59.658 mkv: WEBM format supports only VP8+VORBIS streams (detected AAC) Somebody test DOCKER TVH transcoding? Best Regards, nuno

I have one J4014M board, and 2 tunners from DVBsky (usb T330 and DVBSky S952). i Installed plugin from unRAID DVB Edition. Tested UNRAID 6.6.6 with DVB Edition, ( libreelec, Digital Devices, TBS) and and 6.6.6build v2, it with this build https://forum.libreelec.tv/thread/12380-le-8-2-5-with-uhd-630-coffee-lake-gemini-lake-support-and-luks/ I did passthrough my PCI and USB devices sucessfull. I can view tunners correct and scan OK ( DVB-C / T2). I have one problem: In TVheadend, i get a lot of Continuity Errors in tunner USB DVBSky T330. That tunner works well direcly to this build of TVheadend without Unraid. The problem come from DVBediton or from unraid passthrough? So, somebody have one idea how are causing this issue?

I edited the post Thanks a lot. I'm trying to pass-through GT1030 without success... i have one Asrock J4105M (uefi) + Gt1030 (uefi). I use the same process of that guide, i dump my bios and inject it at VM. E get black screen for 1-3 secounds, and after goes back to terminal unraid. Sometimes get terminal unraid window with strange color squares. There are any possibility to fix it? Best Regards

My bios dump for collection: GT 1030 Gigabyte.rom I inject inject the bios dump and it not work. I'm trying to use GT 1030 at VM win 10, i get black image, and after back to unraid terminal window when start VM with Graphics pass-through. Somebody can give me some help?! Best Regards, Nuno