-
Cache Drive full and Mover not appearing to work
i was trying to force all the data from that share onto my main drives and in the process that error popped back up. it is now set to cache --> array
-
Cache Drive full and Mover not appearing to work
Did all these as well. I did go down the rabbit hole and ran mover stop and then figured mover start had to be the other command in cli and It appeared to be going through files. I think the pc backup program i am using created hashes for all my files and so there are probably loads of tiny little files it has to get through to process the bigger files that will allow my cache drive to return to normal ops. I think ill let this run for a few hours and see where it takes me unless you have more insights. I will report back.
-
Cache Drive full and Mover not appearing to work
I have completed all these and still have yet to see my cache drive empty out. updated diags for review. darktower-diagnostics-20230914-1204.zip
-
dkrutz started following Cache Drive full and Mover not appearing to work
-
Cache Drive full and Mover not appearing to work
while ive found some older posts regarding it, I am struggling to figure out how to solve this problem. I was reincoding all my stuff and it filled up my cache drive. I also have been in the process of changing how I backup my pc to the unraid server etc. the cache drive filled up and now mover doesnt seem to be moving anything even though it say it is. I see reads from the cache drive in the low kbs and writes to my main drives in the mid 30mbps but nothing ever moves off the cache drive. see attached diags. Any help is appreciated and I am sorry if the answer is out there looking at me in the face without me able to find it. darktower-diagnostics-20230914-1027.zip
-
Cache Drive Mishaps
I'm dumb I was looking in the tmp folder not the temp folder.... Its all there I'm starting the copy now. Your a lifesaver! ill post back when I get it all back and running!
-
Cache Drive Mishaps
Did the temp directory sent this command mount -o degraded,usebackuproot,ro /dev/nvme0n1p1 /temp should I have done that command without the p1 jsut nvme0n1? now shows mounted 0b of 0b used
-
Cache Drive Mishaps
Label: none uuid: d49d0a55-5dcc-4d92-9501-af971272be59 Total devices 1 FS bytes used 23.45GiB devid 1 size 3.64TiB used 25.02GiB path /dev/sdf1 Label: none uuid: ab8c0c16-6f0a-4dd3-a238-d2fa7db4b6bd Total devices 1 FS bytes used 8.35GiB devid 1 size 70.00GiB used 11.02GiB path /dev/loop2 Label: 'S5H9NS0N923314M' uuid: 50e52176-fd38-4291-b1f8-9fb63d6b581d Total devices 2 FS bytes used 921.42GiB devid 1 size 931.51GiB used 931.51GiB path /dev/nvme0n1p1 *** Some devices missing Label: 'SanDisk_SDSSDH3_1T02_1946BC800591' uuid: 553e5f4a-694b-46d2-abdb-8ce7a39aeac8 Total devices 1 FS bytes used 152.00KiB devid 1 size 953.87GiB used 1.01GiB path /dev/sdc1
-
Cache Drive Mishaps
darktower-diagnostics-20220731-0853.zip
-
Cache Drive Mishaps
I think thats from when i had added a drive to the cache grouping to see if it would work. that drive had nothing on it. It was part of my dumb troubleshooting. it is this drive SanDisk_SDSSDH3_1T02_1946BC800591 (sdc)
-
Cache Drive Mishaps
darktower-diagnostics-20220731-0848.zip
-
Cache Drive Mishaps
Jul 31 08:47:26 DarkTower unassigned.devices: Mount drive command: /sbin/mount -t 'btrfs' -o ro,noatime,nodiratime,discard '/dev/nvme0n1p1' '/mnt/disks/S5H9NS0N923314M' Jul 31 08:47:26 DarkTower kernel: BTRFS info (device nvme0n1p1): turning on sync discard Jul 31 08:47:26 DarkTower kernel: BTRFS info (device nvme0n1p1): using free space tree Jul 31 08:47:26 DarkTower kernel: BTRFS info (device nvme0n1p1): has skinny extents Jul 31 08:47:26 DarkTower kernel: BTRFS error (device nvme0n1p1): devid 2 uuid 215b2157-381d-4cdd-b0de-c60c39df6c28 is missing Jul 31 08:47:26 DarkTower kernel: BTRFS error (device nvme0n1p1): failed to read chunk tree: -2 Jul 31 08:47:26 DarkTower kernel: BTRFS error (device nvme0n1p1): open_ctree failed Jul 31 08:47:26 DarkTower unassigned.devices: Mount of 'nvme0n1p1' failed: 'mount: /mnt/disks/S5H9NS0N923314M: wrong fs type, bad option, bad superblock on /dev/nvme0n1p1, missing codepage or helper program, or other error. '
-
Cache Drive Mishaps
it shows mount and I can click it. Says mounting then just goes back to the orange mount button.
-
Cache Drive Mishaps
heres an updated diagnostics as well. I thought the drive failed so I purchased a new cache drive and plugged it in. The nvme is still the old drive that was being used. darktower-diagnostics-20220731-0834.zip
-
Cache Drive Mishaps
using SB copy 1, bytenr 67108864
-
Cache Drive Mishaps
Sorry for the multi post i thought I deleted it. The nvme is the one that was the original cache that had all my app data yes. It is currently sitting in unassigned devices as unmountable.
dkrutz
Members
-
Joined
-
Last visited