luminus

I do not know what turn them all off, but thank you for the tremendous help. :)

testparm # Global parameters [global] bind interfaces only = Yes disable netbios = Yes disable spoolss = Yes interfaces = 192.168.1.63/24 fd52:29a3:e0fd:2001:d250:99ff:fedc:5611/64 127.0.0.1 ::1 load printers = No logging = syslog@0 map to guest = Bad User max open files = 40960 multicast dns register = No ntlm auth = ntlmv1-permitted null passwords = Yes passdb backend = smbpasswd printcap name = /dev/null security = USER server min protocol = SMB2 server signing = if_required server string = show add printer wizard = No smb1 unix extensions = No fruit:nfs_aces = No idmap config * : range = 3000-7999 idmap config * : backend = tdb acl allow execute always = Yes aio read size = 0 aio write size = 0 create mask = 0777 directory mask = 0777 hide dot files = No include = /etc/samba/smb-shares.conf invalid users = root use sendfile = Yes wide links = Yes [flash] comment = Unraid OS boot device force user = root guest ok = Yes map archive = No map readonly = yes path = /boot read only = No vfs objects = catia fruit

I tried it. no good.

It didn't seem to be an issue so far. I just had a specific drive dockers.

I booted in Safe mode. Still having the same issue. What is testparm? houseofgivens-safemode-diagnostics-20250828-1520.zip

Here is an updated diagnostic report.houseofgivens-diagnostics-20250828-0649.zip

I do have some situated as you say. Most of them are in the app data. This had not been an issue until after the update.

All the shares show up in the tab. The only share that shows up when I look for it on the network is the flash drive. At one point I was able to see more but that dwindled down to just the flash drive. At one point I was able to see more of the shares but that dwindled down until the only one I can see is the flash boot drive. All of them are visible in the shares tab.

houseofgivens-diagnostics-20250827-2128.zipI updated Unraid and everything was fine for a while. Then my SMB shares vanished. I disabled NFS, and Host access in Dockers..no joy. Please assist.

The Holo option may have worked, but I do not have an AMD GPU. :(

Sorry for the radio silence. Had to rebuild my server lol. I'm going to give it a try and report back.

I did try. It asked for an ISO for the setup. I downloaded the Steam OS from the site, but it would not allow me to use it for the setup of the VM. I was looking for a. way to run it as a VM and seeing if anyone had a guide for setup?

I am trying to find a guide for setting up a SteamOS. I got the headless Docker to work, but wanted to use the non-headless instead. Any advice would be helpful. I am running an: CPU- AMD epyc rome 64core MB- Asrock ROMED2T RAM- ECC 128GB GPU- RTX QUADRO 4000

Late reply. It worked itself out.

I am trying to find a guide for setting up a SteamOS VM. I got the headless Docker to work, but wanted to use a VM instead. Any advice would be helpful. I am running an: CPU- AMD epyc rome 64core MB- Asrock ROMED2T RAM- ECC 128GB GPU- RTX QUADRO 4000

How do I disable SMT?

houseofgivens-diagnostics-20240223-1314.zip After I updated from 6.12.6 to .8 I have been unable to access my server via a gui. I can still access my files. Nor can I change the boot options i.e. SAFE mode. would appreciate your guidance.

I tried to add them via the GUI...no joy. Does same width mean since I have 8 12TB drives I wound Need to add 8 14TB drives? Currently only have six. Is there a different way to add them? Or would I need to delete pool and reestablish it with all the drive at once instead of adding to it?

I swapped the 14TB for the 12s. How do you add them as a vdev"?

I recently upgraded to the most recent version of Unraid. I was running a separate z pool on unread, but now since the feature was added I created a native Z pool with extra drives then transferred the data from my old Z pool to the new one. I was trying to figure out how I could integrate those drives into the new Z pool. Total there are 6 14 terabyte drives (native Z pool) and 8 12 terabyte drives. When I try to use the native feature to add them it spit out an error saying the drives were not of the same size. Is there a way around this without losing the data that I have on the 14 terabyte drives? I was hoping not to have to lose another drive for parody.

I updated my Bios and have not been able to get windows 10 VM to accept my Quadro RTX 4000. I tried reverting my bios back. IOMMU group changes after every reboot. I tried using disable, downstream, and multifunction in VM settings. I even created a new windows 11 VM and still no luck. I tried adding via IOMMU groups and got various errors such as "boot/config/plugins/nvidia-dri" "unable to find 'swtpm' binary in $path: no such file or directory" "device 0000:82:00.0 not found: could not access /sys/bus/pci/devices/0000:82:00.0/config: no such file or directory" "device 0000:81:00.0 not found: could not access /sys/bus/pci/devices/". Windows 11 VM works with VNC Not Windows 10. Any help would be appreciated. houseofgivens-diagnostics-20220824-0717.zip

I updated my Bios and have not been able to get windows 10 VM to accept my Quadro RTX 4000. I tried reverting my bios back. IOMMU group changes after every reboot. I tried using disable, downstream, and multifunction in VM settings. I even created a new windows 11 VM and still no luck. I tried adding via IOMMU groups and got various errors such as "boot/config/plugins/nvidia-dri" "unable to find 'swtpm' binary in $path: no such file or directory" "device 0000:82:00.0 not found: could not access /sys/bus/pci/devices/0000:82:00.0/config: no such file or directory" "device 0000:81:00.0 not found: could not access /sys/bus/pci/devices/". Windows 11 VM works with VNC Not Windows 10. Any help would be appreciated. houseofgivens-diagnostics-20220824-0717.zip

It worked after I restarted it a second time. Thank you.

I did. still only the rtx4000.