wolfer14

Got the plugin up and running....How do I log in?

anyone?

Yes, this pic is well after I've tried alot of suggestions. I have tried mounting the drive and all I get is empty folders.

Tried that and when I click on the share... It's empty. Still think it has something to do with the sde2.

I have a hard drive from Cloud Media (Popcorn Hour) There is about 500gigs of data that I'm trying to transfer over to my Unraid. Hard drive is currently hooked up to the unraid via USB and I do have SNAP plugin installed and working. My issue is I don't see any of my files and have no idea how to attempt to move these files over....I think my files are on the /dev/sde2 but I'm not confident to move forward. Added some snapshots from snap and disk management https://www.dropbox.com/s/xnlqum5jw8fl2sk/unraid.png?dl=0 Can anyone help?

I've stumped and cannot get this plugin to install. I did have it before but it wouldn't start service, so I decided to remove it and start over. Now I can't even get it to install. I put the PLG into the config/plugins and rebooted the server...nothing. Tried the NZBget and it worked without any issues....Am I missing something?

I'm running off the free version and don't have a cache drive.

Ramfs is the reply

pls forgive my stupidity, can you please point me in the right area as where to run that command?

Awesome thank you, got it installed but wondering about the warning??

with port 8080 it just takes me to the unmenu.

Won't connect, i'll try port 8080 as it was the default.

I'm at a loss here I've installed the sabnzbd-0.4c-i468-bw plugin and have it running on the unraid. configured the setting that i see on SimpleFeatures v1.0.11 screen click apply and all that happens is the screen greys out and I sit and wait. Bottom of the screen I get; Starting sabnzbd: sudo -u nobody python /usr/local/sabnzbd/SABnzbd.py -d -s 0.0.0.0:7214 --config-file /usr/local/sabnzbd --pid /var/run/sabnzbd > /dev/null 2>&1 how do I get to the main Sabnzbd config screen or am I doing something wrong?

I can see the shared library on Itunes, which is on my PC. But on the appleTV, with home sharing turned on, it just says No content Found. From the PC i can Airplay from unraid to the appletv via itunes. Is there a way to show the shared library?

Just got all of the SimpleFeatures installed and am playing with the Itunes server. Do you have to have a PC or MAC running Itunes in order to see the media files via an AppleTV or is there a workaround

done a 21hr memory test. No Errors?

The raw Values were pushed to right. you had to scroll to the right in order to see them. I've fixed it but they are not in a perfect line.

Here is the first Drive === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA1614623 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 4 23:38:54 2011 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 172 021 Pre-fail Always - 1183 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 451 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5797 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 28 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4973 194 Temperature_Celsius 0x0022 109 105 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Short offline Completed without error 00% 5795 - # 2 Conveyance offline Completed without error 00% 5763 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And the Other === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA1495369 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 4 23:42:57 2011 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 253 168 021 Pre-fail Always - 1266 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 439 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5807 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 22 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 4621 194 Temperature_Celsius 0x0022 115 104 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 5799 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Tried the drive with the jumpers and no luck. drives failed after the 50% Pre-clear. without jumpers the drives would fail under the 50% Pre-clear Will try Dgaschk post. report back soon! thanks all for the support!

my WDC WD20EARX-00PASB0 passed after 28hrs So far I've run the other Drives through WD software and had no issues. Put it in unraid and try a pre-clear and I can't get past 30-50% MB locks up and that's it. The two drive are WD20EARS 2.0TB Trying one of the drives again...see what happens. Anyone have issues like this?

Been doing the Pre-clear for over 12hrs. getting e-mails like a charm....then all of a sudden they stopped during the Writing of Zeros. Got home this evening and found out that our area had a black out at 10 am. Lucky me gets to start this process all over again!! First things first, I put the Unraid on a battery backup. Lets try again! This is going to be a really long haul doing one drive at a time to see which one is at fault. In the mean time I'm running the other drives on WD data lifeguard diagnostics to see if there is a issue. Now that I think back to when I bought the first 2TB drive, I wanted it for my PCH (Popcorn Hour C200) I had a ton of issues of the system locking up and just not working after i installed the drive. Ended up calling tech support, spent almost an hour with them and they finally thought it was the MB. Sent it in for repair or replace. They called me back a few days later and told me that they couldn't find anything with the MB...? They said they would replace the MB just to be on the safe side Got the unit back and still had issues. Process of elimination, I started to blame the drive Did some research and people were bitching about the Ears Drives and how they sucked....I ended up testing it with another drive in the PCH. didn't have any issues with a non green 1.5TB drive. I was now convinced that the drive was defective. I took it back to where I bought it and told them my story. They took it and tested it. Came back with a A+ Really? your Kidding me, Right? Put my tail between my legs and went home Left the 1.5TB Non Green drive in the PCH and it has been working like a charm. Forgetting all about the issues I had, I ended up putting the 2TB drive into a D-link DNS323. I needed another drive in order to be able to mirror the other drive. So I bought another one of the exact brand and size. Played with the D-link for a few months and got so fed up with the poor speed and lack of support, I was ready for something else. I was just about ready to shell out some cash for a Qnap, until one day a coworker and I were shooting the BS and we got on the subject of storage, that is when he told me all about Unraid. Well here I am... again with this one mysterious drive that doesn't want to behave and is causing me allot of grief! just hoping that the WD data lifeguard diagnostics finds a fault in the drive so I can send it back! Oh just got an email Preclear Zeroing Disk progress 25% complete.

Thanks for the info I've unplugged the two other drives and am in the process of doing a Pre_clear on the newest drive I have. The two Drives that were getting a little to warm are in a steel cage that is the farthest away from the fan. When I pre-clear them I'll modify the chassis so that more air can pass through the drives. When I started the Pre-Clear I noticed this "Partition 1 does not end on cylinder boundary." Is that Okay? Tower login: root Linux 3.0.3-unRAID. root@Tower:~# cd /boot root@Tower:/boot# screen Pre-Clear unRAID Disk /dev/sda ################################################################## 1.13 Device Model: WDC WD20EARX-00PASB0 Serial Number: WD-WCAZA8005251 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 1 heads, 63 sectors/track, 62016336 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 64 3907029167 1953514552 83 Linux Tower login: root Linux 3.0.3-unRAID. root@Tower:~# cd /boot root@Tower:/boot# screen Pre-Clear unRAID Disk /dev/sda ################################################################## 1.13 Device Model: WDC WD20EARX-00PASB0 Serial Number: WD-WCAZA8005251 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 1 heads, 63 sectors/track, 62016336 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 64 3907029167 1953514552 83 Linux Partition 1 does not end on cylinder boundary. ######################################################################## invoked as ./preclear_disk.sh -A -M 4 /dev/sda ######################################################################## (-A option elected, partition will start on sector 64) Are you absolutely sure you want to clear this drive? (Answer Yes to continue. Capital 'Y', lower case 'es'):

Hi all I'm a newbie to Unraid. trying to set up my first system, I've got 3 WD 2tb drives. So far I've got everything installed following the Configuration Tutorial. Right now I'm at Pre-Clear step. Everything was going fine until about 65% everything just stops working. I cannot telnet into the tower, cannot wake the monitor see anything on screen. LAN is still flashing, Fans are still running I'm stumped. only way I can get back in is to do a hard Reboot. I've tried also just doing a Parity-Sync before the pre-Clear and again when it's about 60% done or 6 hrs in. everything locks up. I've retried 4 times now trying different things and I still get the same thing. One of my last e-mail from the tower was this; Pre Read in progress on /dev/sdc: 25% complete. ( 500,200,243,200 of 2,000,398,934,016 bytes read )at 37.6 MB/s Disk Temperature: -->44<--C, Using Block size of 1,032,192 Bytes Next report at 50% Calculated Read Speed: 36 MB/s Elapsed Time of current cycle: 3:49:14 Total Elapsed time: 3:49:15 Could Unraid shut down the system if the drive gets to hot? I started the 3 drives at the same time for the Pre-Clear got the above 3 hours in. This was the last Email I got, 5 hours in. So I assume the dev/sdc is still working away Pre Read in progress on /dev/sdd: 50% complete. ( 1,000,400,486,400 of 2,000,398,934,016 bytes read )at 58.4 MB/s Disk Temperature: 40C, Using Block size of 1,032,192 Bytes Next report at 75% Calculated Read Speed: 54 MB/s Elapsed Time of current cycle: 5:06:33 Total Elapsed time: 5:06:33 Any ideas? syslog.txt