Jump to content

Cliff

Members
  • Content Count

    74
  • Joined

  • Last visited

Everything posted by Cliff

  1. I have the ASUS TUF Gaming X570-Plus (non-wifi). I would not recomend you to buy this board. I have two gpus but can only use one of them as the system hogs one of them and stubbing does not make any difference. I have a multi-controller USB pci-e x4 whitch I can't connect, so I had to use a single controller usb x1 to be able to get some more usable usb-ports for vm's. Adding a third pci-x1 gpu to use as dummy disables the network.
  2. I found out what was causing the problem. I forgot that I also added a third gpu to one of the pci-e x1 slots to my motherboard so that I could use the two main gpus for vm's. For some reason my motherboard disables the network when I add the third gpu. Removing it solved everything.
  3. Ok, here is the diagnostics unraid-diagnostics-20201021-1902.zip
  4. I tried upgrading from stable to the latest beta after reading it worked well. But now I don't have any network, after booting it just says "ipv4 & ipv6 address not set" How can I fix this ? can I revert from the terminal or is it possible to fix the newtwork ? Motherboard: Asus tuf gaming x570-plus CPU AMD 3900X
  5. I am the only one who get the status "stalled" on all downloads ? Most often torrents starts of att full speed then after a minute or so torrents get stalled and all network activity halts. after a few minutes all torrents start again. And then it continues in the same way stalled/downloading. I have been using rutorrent before and have never had this problem. I have 10TB free space, 1000/1000 Mbit/s connection and all torrents have lots of seeds/pers What can cause this problem ?
  6. Solved. My Wireguard VPN file was generated to include a killswitch. If I just generated a plain ipv4 wireguard-config it works.
  7. I am trying to use with wireguard and it looks like it starts ok. But I can't access the webui. Does anyone have any tips ? 2020-09-08 07:55:37.050982 [INFO] VPN_ENABLED defined as 'yes' 2020-09-08 07:55:37.064807 [INFO] DISABLE_IPV6 is set to '1' 2020-09-08 07:55:37.080506 [INFO] Disabling IPv6 in sysctl 2020-09-08 07:55:37.100444 [INFO] VPN_TYPE defined as 'wireguard' 2020-09-08 07:55:37.121190 [INFO] WireGuard config file is found at /config/wireguard/wg0.conf dos2unix: converting file /config/wireguard/wg0.conf to Unix format... 2020-09-08 07:55:37.138884 [INFO] VPN remote line defined as '<hidden>:51820' 2020-09-08 07:55:37.155440 [INFO] VPN_REMOTE defined as '<hidden>' 2020-09-08 07:55:37.171694 [INFO] VPN_PORT defined as '51820' 2020-09-08 07:55:37.187473 [INFO] VPN_PROTOCOL set as 'udp', since WireGuard is always udp. 2020-09-08 07:55:37.203097 [INFO] VPN_DEVICE_TYPE set as 'wg0', since WireGuard will always be wg0. 2020-09-08 07:55:37.219644 [INFO] LAN_NETWORK defined as '192.168.0.0/24' 2020-09-08 07:55:37.237433 [INFO] NAME_SERVERS defined as '1.1.1.1,192.168.0.1' 2020-09-08 07:55:37.252383 [INFO] Adding 1.1.1.1 to resolv.conf 2020-09-08 07:55:37.267698 [INFO] Adding 192.168.0.1 to resolv.conf 2020-09-08 07:55:37.282799 [INFO] Starting WireGuard... Warning: `/config/wireguard/wg0.conf' is world accessible [#] ip link add wg0 type wireguard [#] wg setconf wg0 /dev/fd/63 [#] ip -4 address add <hidden>/32 dev wg0 [#] ip link set mtu 1420 up dev wg0 [#] resolvconf -a wg0 -m 0 -x [#] wg set wg0 fwmark 51820 [#] ip -4 route add 0.0.0.0/0 dev wg0 table 51820 [#] ip -4 rule add not fwmark 51820 table 51820 [#] ip -4 rule add table main suppress_prefixlength 0 [#] sysctl -q net.ipv4.conf.all.src_valid_mark=1 [#] iptables-restore -n [#] iptables -I OUTPUT ! -o wg0 -m mark ! --mark $(wg show wg0 fwmark) -m addrtype ! --dst-type LOCAL -j REJECT && ip6tables -I OUTPUT ! -o wg0 -m mark ! --mark $(wg show wg0 fwmark) -m addrtype ! --dst-type LOCAL -j REJECT 2020-09-08 07:55:37.403790 [INFO] Docker network defined as 172.17.0.0/16 2020-09-08 07:55:37.421942 [INFO] Adding 192.168.0.0/24 as route via docker eth0 2020-09-08 07:55:37.438087 [INFO] ip route defined as follows... -------------------- default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.7 192.168.0.0/24 via 172.17.0.1 dev eth0 -------------------- iptable_mangle 16384 1 ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle 2020-09-08 07:55:37.460711 [INFO] iptable_mangle support detected, adding fwmark for tables 2020-09-08 07:55:37.542791 [INFO] iptables defined as follows... -------------------- -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i wg0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 51820 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT ! -o wg0 -m mark ! --mark 0xca6c -m addrtype ! --dst-type LOCAL -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -o wg0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 51820 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT -------------------- 2020-09-08 07:55:37.706126 [INFO] ENABLE_SSL is set to yes 2020-09-08 07:55:37.721200 [SYSTEM] If you use Unraid, and get something like a 'ERR_EMPTY_RESPONSE' in your browser, add https:// to the front of the IP, and/or do this: 2020-09-08 07:55:37.737314 [SYSTEM] Edit this Docker, change the slider in the top right to 'advanced view' and change http to https at the WebUI setting. 2020-09-08 07:55:37.753404 [INFO] /config/qBittorrent/config/qBittorrent.conf already has the line WebUICertificate.crt loaded, nothing to do. 2020-09-08 07:55:37.769123 [INFO] /config/qBittorrent/config/qBittorrent.conf already has the line WebUIKey.key loaded, nothing to do. 2020-09-08 07:55:37.784654 [INFO] /config/qBittorrent/config/qBittorrent.conf does have the WebUI\HTTPS\Enabled already set to true. 2020-09-08 07:55:37.801460 [INFO] A group with PGID 100 already exists in /etc/group, nothing to do. 2020-09-08 07:55:37.817167 [INFO] An user with PUID 99 already exists in /etc/passwd, nothing to do. 2020-09-08 07:55:37.833101 [INFO] UMASK defined as '002' 2020-09-08 07:55:37.849904 [INFO] Starting qBittorrent daemon... Logging to /config/qBittorrent/data/logs/qbittorrent.log. 2020-09-08 07:55:38.868764 [INFO] qBittorrent PID: 269 2020-09-08 07:55:38.874078 [INFO] Started qBittorrent daemon successfully... The only thing I changed was the default port 8080 and that I tried adding my router ip as a nameserver (but that made no difference)
  8. I have had my Windows 10 VM running fine for over a year but I had an power outage that shut down my unraid server and now my Win10 VM refuses to start. The logs get spammed with: 2020-09-03T18:47:25.794965Z qemu-system-x86_64: vfio_region_write(0000:04:00.0:region1+0x1b7a78, 0xff2067b2ff2067b2,8) failed: Device or resource busy 2020-09-03T18:47:25.794973Z qemu-system-x86_64: vfio_region_write(0000:04:00.0:region1+0x1b7a80, 0xff2067b2ff2067b2,8) failed: Device or resource busy 2020-09-03T18:47:25.794979Z qemu-system-x86_64: vfio_region_write(0000:04:00.0:region1+0x1b7a88, 0xff2067b2ff2067b2,8) I am using an GTX 1060 with a dumped bios, could it be that the bios dump got corrupt? ocr can it be something else ? Edit: I just noticed one change, I have two GPUs and before I could only see the booting and unraid startup info if I connected a monitor to my second gpu. But now I see the bootup-info on my primary gpu. Is this a bios issue or do I need to re-apply some settings to unraid to switch the primary gpu ? I have also stubbed both gpus using the VFIO-Plugin
  9. Is there any planned updates regarding Wireguard ? I think the possibility to route only specific docker-traffic through the Wireguard interface is wanted by many.
  10. Is there still no possibility to only route specific docker traffic through a wireguard connection ?. I really only need wireguard for my ruTorrent traffic, but when enabling wireguard using my mullvad.net provider the vpn screws up a lot of my other containers network like plex, lms, homeassistant. If not, is this something that someone is working on ?
  11. How do I undo changes made by the plugin? My unraid server will not boot anymore
  12. I have installed a few docker containers but my img is already started to fill up as I get notifications about the docker image is over 70% full. I have seen other users having alot more docker apps than me, do they have a larger docker image or have I misconfigured anything? Most dockers use default settings so I would think that that is correct.
  13. Ok How do I do that? When I boot in safemode I cant see any plugins. And when I boot normally I can only use the terminal
  14. After running fine for weeks my unraid-server started reacting slow in the gui and when using home assistant docker. So I rebooted the server and after that the server is only accessible using safe mode. When I start unraid normally the terminal shows the same info as usual and gives me an ip but the web-ui is not accessible. If I reboot in safemode I can start the array and my virtual machines, but how do I figure out what is wrong? unraid-diagnostics-20200324-1828.zip
  15. I am using Home Assistant docker in host mode and am trying to add plex and spotify access. But when settign up the acces from HA I get redirected and then directed back which then throws an error that the site cant be reached. So I click authorize in HA, I get redirected to a plex login-page and after logging in plex redirects me to: http://10.65.249.194:8123/auth/plex/callback?flow_id=ba59d3dc2bf342b681c1e541f79710fb Which I guess is a internal docker ip adress. Same thing happens with spotify. How can I fix this?
  16. I am using a Asus TUF x570-Plus motherboard and am trying to pass two separate USB controllers into two separate VM's After reading several posts on the forum I have placed the Unraid usb on the 0b:00.3 USB controller. I have also passed 06:00.0, 06:00.1, and 06:00.3 controllers using the VIFO-PCI plugin. My Windows 10 VM is using 06:00.1 and it works perfectly. But I have not got my other VM's to be able to use the 06:00.3 controller as nothing happens when I plug anything in the ports. When looking in the log for the other VM I get this: 2020-03-11T16:02:11.664422Z qemu-system-x86_64: vfio: Cannot reset device 0000:06:00.0, depends on group 27 which is not owned.
  17. Is there any USB PCIe x1 card that have multiple usb controllers ? So that I can add one card but passthrough two groups of usb slots to two different VM's ? I have only found the Sonnet "Allegro Pro USB 3.0" that have multiple controllers and works in unraid. But it is PCIe x4
  18. I am using a Asus tuf x570-plus motherboard but the IOMMU-groups seams to be identical. After reading the whole thread I have placed the unraid usb on the 0b:00.3 USB controller. I have also passed 06:00.1, and 06:00.3 controllers using the VIFO-PCI plugin. My Windows 10 VM is using 06:00.1 and it works perfectly. But I have not got my other VM's to be able to use the 06:00.3 controller as nothing happens when I plug anything in the ports. I am not sure which ports is connected to 06:00.3 but I have tried all ports on my unraid server. Or is it connected to the single USB-C connector ? Do I also need to pass through: Group 26 06:00.0 1022:1485 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP Edit: passing through Group 26 did not change anything. When looking in the log for the other VM I get this: 2020-03-11T16:02:11.664422Z qemu-system-x86_64: vfio: Cannot reset device 0000:06:00.0, depends on group 27 which is not owned.
  19. Is there some way to add a USB-Switch to unraid so that I can use the same keyboard/mouse to all my VM's ? I tried connecting the keyboard/mouse to my switch and just plugged it in and it worked directly my WIN 10 VM. But as soon as I switched input the VM froze and I had to reboot my entire server to get it running again.
  20. Removing the ipv6 from the config-file made no difference. When I flip the inactive-button to active it resets after clicking "done"
  21. Thanks, for the answer. Another stupid question: Is it possible to only route specific containers through wireguard? Rigth now I only have the need for ruTorrent to use wireguard.
  22. Can I use a Radeon RX 550 to run Catalina ?
  23. Can anyone tell me what I am doing wrong ? I signed up with an VPN-service that offers wireguard (mullvad.net) and downloaded the config.file and imported it. But wireguard does not connect.
  24. I was playing around with wireguard and made some error so that I lost access to the unraid server. I also had the option for wireguard to autostart enabled. How can I disable wireguard from the unraid boot prompt?
  25. Ok I created a new VM template with exactly the same info but I also used a vBios dump that I created my self. And now it works.