Jezper

I'm having the same problem. Any news on this? None of my VM:s network work anymore with 6.12. Using virtio adapters and neither virtio nor virtio-net works. Using the bridge adapter br.<vlan-number> Doing a package scan from the router only results in a lot of ARP packages being transferred back and forth. It is asking for the mac address of the default gateway for the specific VLAN. But the packages are being sent over and over again.

+1 for this feature. My system is also set to not spinning down, but I would like to keep my hot spares spun down. Is there any other way that I can achieve this? Maybe I can set the default setting to spin down disks, and then go in and change all of the array disks to not spin down individually?

I'm running Unraid on an i9-9920X 12 core CPU. On the server I have: Windows VM, doing calculations 24/7 that takes up 100% CPU power (of the cores I give it). Plex Media Server Docker. To be able to do a 4K HDR transcode with Plex, I have to reduce the number of cores for my Windows VM to 6 cores. But since Plex only needs these recourses once in a while, 50% of my CPU sits idle most of the time. Therefore I wonder if there is any way to dedicate 11 cores to the VM, but let the Plex docker have a higher CPU priority, so it can use as much CPU power as it needs, when it wants to, and let the VM have second priority when the docker needs power?

I don't have the advanced buttons plugin installed, but are getting the same issue. It seems to happen when the auto update of the dockers occur. It happens like once or twice a month. The docker disappears and become and orphan... Anyone know what the problem could be+

Thanks for the advice, I've done that now. But for security reasons it would be nice to be able to turn this feature off completely. I'm using the share for a backup purpose, and therefore I only want it to be shared one way to prevent unauthorised access by malware and ransomware.

Hi Guys. I'm mounting SMB shares from another server on my unraid server with unassigned devices. But these shares becomes re shared as an SMB share of my unraid server. I don't want this behaviour. How do I turn it off? It happens with every SMB mount I create.

Hi Guys. I'm mounting SMB shares from another server on my unraid server with unassigned devices. But these shares becomes re shared as an SMB share of my unraid server. I don't want this behaviour. How do I turn it off? It happens with every SMB mount I create.

Hi I am trying to passthrough a 10 GbE network adapter to a Windows VM, but I have no luck. The motherboard is a supermicro C9X299-PG300F. First I tried a ASUS XG-C100C adapter, but once inside windows it kept resetting itself all the time. Sometimes I could get it working, but then after reboot it was failed again. It just kept saying "unidentified network" and kept resetting. The event log talked about hardware failure. Now I have changed out the adapter to a Supermicro Intel X550, and the failure is similar. I can sometimes get it working, but after a while windows disables the card due hardware failure. If I manually remove it in the device manager, I can get it working again, but it soon gets disabled again, and it does not last a reboot. I have tried different BIOS settings (per pcie slot) LEGACY, OFF and UEFI, and I have tried changing PCIE slot. Nothing seems to help. Now I am out of ideas... Anyone got some idea? Regards, Jesper

Even if I try to run iperf3 from the windows VM against iperf on the unraid server, I get slow speed about 1.7 Gbits/second.

Hi guys. I have a 10 GbE network card in my unraid server. Its the supermicro C9X299-PG300F motherboard with the Aquantia AQC107 10G network chip onboard. On the server I have a Windows 10 VM with two nvme drives and a gfx card passed through to it. When I try to connect to my qnap with the windows VM and copy a file I get a little bit over 1 Gb (150 MB/sec or so) connection. This is also confirmed with iperf3 that shows 1.76 Gbits/sec towards the qnap. But when I run iperf from outside of the VM, straight on the unraid server against my qnap, I get the full 9.5 Gbits/sec. How do I get the VM to use the full connection speed? The virtio drivers are installed, and it shows up as a redhat virtio network adapter, with a connection speed of 10 Gbit/sec

Hi guys I am getting the same issue, after changing motherboard to a supermicro C9-X299 PG-300F. The solution to restart the docker network works, but only untill reboot, then I have to manually do it again. Did you guys get it solved for you? One thing that might be a clue is that on boot I get this message "RTNETLINK answers: Network is down". It waits for a bit but then proceeds to boot. I have tried to disable all but one network interface (using LAN2, the one with shared IPMI) and I have disabled all VLANS. Anyone has any ideas?

The hw transcoding is working for all the formats except for HEVC 10 bit HDR (Display Title 1080p (HEVC Main 10 HDR) 89.9 Mbs) Codec HEVC Bit Depth 10 Chroma Subsampling 4:2:0 Color Primaries bt2020 Color Range tv Color Space bt2020nc Color Trc smpte2084 Frame Rate 23.976 fps Height 2160 Level 5.1 Profile main 10 Ref Frames 1 This is also the only thing that is too slow to do in software transcoding with my i7-2700K, so I bought a gtx 1050 ti to do it in HW instead, to be able to play these movies over the internet on a remote location. According to the Video encode and decode support matrix: https://developer.nvidia.com/video-encode-decode-gpu-support-matrix it looks like it should work. Is enyone else getting this to function in plex? If not, and this is not supported or functional in plex, what kind of hardware do I need to be able to do this in software transcoding?

Okey, thanks for your reply

Hi When I try to install the plugin I just get a server error message: plugin: downloading: https://raw.github.com/linuxserver/Unraid-Nvidia-Plugin/master/archive/Unraid-Nvidia-2019.02.09.txz ... failed (Invalid URL / Server error response) plugin: wget: https://raw.github.com/linuxserver/Unraid-Nvidia-Plugin/master/archive/Unraid-Nvidia-2019.02.09.txz download failure (Invalid URL / Server error response) If I manually try to go to the url for the .txz file, I just get a 503 error in my browser: Error 503 Backend unavailable, connection timeout Backend unavailable, connection timeout Guru Mediation: Details: cache-bma1627-BMA 1550613525 3886046937 Anyone else get the same?