Ryokurin
Members
-
Joined
-
Last visited
Everything posted by Ryokurin
-
I've recently decided to build a new server and along with that I purchased an Adaptec ASR-7805 to run the drives. While it does work I get the following text for each drive from the machine's UEFI post. "EFIBlockIOReadBlocks: LBA out of range. BlockIO-Command Failed." The card is in IT mode and I did try it on a different system, but the error didn't appear there. On both systems it otherwise seems to be working fine. I guess my question is, should I worry about the error and try to figure out why it's happening on this specific system (a Gigabyte UD x690 DDR4) go with plan B (a Perc H310 with an HP extender) or assume the Adaptec is defective and roll the dice on another one off of ebay?
-
Has anyone had any trouble getting the image to update? It's happened for me off and on for the last couple of months, but usually after a week or so it will eventually install, but this time it's been about three weeks.
-
I've found the following error when I attempt to update to the latest RC xhci_hcd 000:03:00.0: AMD-vi: Event logged [IO_PAGE_FAULT domain=0x000 address=0x00000000fff96000 flags=0x000] dev/disk/by-label: 248 files, 11633/978499 clusters xhci_hcd 0000:03:00.0: Timeout while waiting for setup device command After this there's basically "usb11-1: device not responding to setup address" errors until the login prompt appears. The server does not pull an IP address and unfortunately, because I've only been using unraid for about a month I'm not familiar with how to pull the logs from the drive. System specs are as follows: M/B: MSI - A88X-G45 GAMING (MS-7900) CPU: AMD A10 PRO-7850B R7, 12 Compute Cores 4C+8G @ 3700 HVM: Enabled IOMMU: Enabled Cache: 256 kB, 4096 kB Memory: 24 GB (max. installable capacity 24 GB) Network: eth0: 1000 Mb/s, full duplex, mtu 1500