prtsmgr

TigerDirect has the Seagate Barracuda Green 2TB 5900RPM/64MB 3.5" Internal SATA Hard Drive (ST2000DL003) for a low $79.99 Free Shipping after rebate. Tax in FL, GA, ID, IL, NC, SD, TX. This drive sells for at least $120 at other reputable vendors. [Compare Prices] This is a stellar price for a 2TB hard drive. Most of the deals we see these days on 2TB drives are closer to $100. This particular model is good as a storage drive thanks to its lower energy consumption. It's also slightly faster than your standard "Green Drive" since it uses a 5900RPM drive vs 5200RPM. $30 rebate Exp 12/21/12 http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7192141&SRCCODE=LINKSHARE&cm_mmc_o=-ddCjC1bELltzywCjC-d2CjCdwwp&AffiliateID=Es5Ekr9eEBk-8SzaZYRHt9zqwefXotsd3g

Do you have another monitor, or can you test without the DVI to VGA adapter? If not, can you check via IPMI on another computer? I have had problems not getting all resolutions when using similar adapters.

Yes I saw that. I think the information applies to the I3 also. I didn't want to change the wording in the link I copied from Supermicro. X9SCM Key Features 1. Single socket H2 (LGA 1155) supports Intel® Xeon® E3-1200 & E3-1200 v2 series, 2nd and 3rd Gen Core i3 processors***, Pentium, Celeron

4 Beeps = Unrecognized Processor BobPhoenix is correct *** BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600. Look at the bottom of this page: http://www.supermicro.com/products/motherboard/xeon/c202_c204/x9scm.cfm

It looks like you have a 2nd generation I3 http://www.intel.com/content/www/us/en/processors/processor-numbers.html http://www.tomshardware.com/forum/334359-28-what-difference-intel-generation-generation-core Edit: It looks like others here have the same combo working. Maybe the MB is bad after all? http://lime-technology.com/forum/index.php?topic=14306.msg135173#msg135173 http://lime-technology.com/forum/index.php?topic=13880.msg131413#msg131413

Do you have a 2nd generation I3? Take a look at this page: http://www.intel.com/support/processors/corei3/sb/CS-031175.htm#10 At the bottom it states: "The Previous Generation Intel® Core™ i3 Processors and the 2nd Generation Intel® Core™ i3 Processors do not support ECC memory, but the 3rd Generation Intel® Core™ i3 Processors support ECC memory.

Is the memory fully seated? When using two memory modules, the recommended setup per the manual is to install the memory in the blue slots

I would try it if you have that one already, otherwise I would get a Seasonic or Corsair

I think it's most likely the power supply, the one in your post is definitely not an EPS12V power supply Compare the specs on yours to this one http://www.newegg.com/Product/Product.aspx?Item=N82E16817139021

Look in the Buy, Sell, Trade section. BigXor has full height brackets for $11.50 + shipping. But he is in the US also Sent from my DROID RAZR using Tapatalk 2

If you don't mind using a 2.5" drive then I have a solution. I have the same case with iStarUSA 5-in-3 cages and I use this bracket from A-Tech Fabrication: http://atechfabrication.com/products/drive_mounting_kits.htm

I don't know if your forum software supports this or not, but you might be able to require a separate forum password for posting like in this pic

Should I worry about these values? Raw_Read_Error_Rate High_Fly_Writes ========================================================================1.13 == invoked as: ./preclear_disk.sh /dev/sdg == ST3000VX000-9YW166 S1F0MJM6 == Disk /dev/sdg has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 5:42:53 (145 MB/s) == Last Cycle's Zeroing time : 5:11:00 (160 MB/s) == Last Cycle's Post Read Time : 12:29:20 (66 MB/s) == Last Cycle's Total Time : 23:24:13 == == Total Elapsed Time 23:24:13 == == Disk Start Temperature: 27C == == Current Disk Temperature: 31C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdg /tmp/smart_finish_sdg ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 113 100 6 ok 55854080 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 69 100 0 ok 31 Airflow_Temperature_Cel = 69 73 45 near_thresh 31 Temperature_Celsius = 31 27 0 ok 31 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================

Really? Cool, thanks! This is the thread with the pre-built .vmdk files. http://lime-technology.com/forum/index.php?topic=19332.msg180076#msg180076

Here's what I have. If your MB has 4 slots it may work for you. Guaranteed working, used in my Dell Vostro 200 until I decided to upgrade to 8GB 4x1GB Crucial CT12864AA800 DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 128Meg x 64 http://www.crucial.com/store/partspecs.aspx?imodule=CT12864AA800 I offered it awhile back for $35 US including Priority Mail shipping http://lime-technology.com/forum/index.php?topic=22763.msg201721#msg201721 I still have it. If interested, please make an offer.

I think this may be the problem, the .plg file should go in /config/plugins

No, I am in the USA shipping from zip code 91345

I have a brand new Azza Helios 910 drive cage. How about $10 + shipping?

UseNetServer has a $95.00 Annual Lifetime Special http://www.newsgroupreviews.com/usenetserver-review.html http://www.newsgroupreviews.com/Reviews.html I am on my second year with them, no complaints here

These are same 5 x 3 units that Limetech will be using in the new line of server hardware coming soon. http://lime-technology.com/forum/index.php?topic=22604.msg200320#msg200320

You can find connectors and custom sleeved cables at http://www.moddiy.com or http://www.frozencpu.com http://www.moddiy.com/products/Corsair-AX%7B47%7DHX%7B47%7DTX-Series-Custom-PSU-Modular-Cables.html#.UJO_RoaO5lM http://www.moddiy.com/products/Corsair-HX-Series-PSU-8%252dPin-%286%252b2-PCI%252de-%26-4%252b4-CPU%29-Modular-Connector-w%7B47%7D-Pins-%252d-Black.html#.UJPCKoaO5lM

You could build a mini-itx unraid using this case. http://www.newegg.com/Product/Product.aspx?Item=N82E16811112348 Kind of pricey, but it looks portable enough.

Have you tried myPlex? I use it on my android phone. http://wiki.plexapp.com/index.php/MyPlex "myPlex is a free service from Plex that lets you watch your media over the internet, share it with friends, or bookmark interesting videos for later viewing. The service makes configuring your network for these functions much simpler than before. Even people with little technical knowledge will be able to use the sophisticated media-sharing features."

bjp999 has put together some links to help new users http://lime-technology.com/forum/index.php?topic=9822.0 At the bottom of the post, you will find a step by step unRAID Configuration Guide. It states it is written for version 4.5.6 and is valid for 4.6 & 4.7 but I think you will still find useful information there. The UnRAID 5 manual is here http://lime-technology.com/wiki/index.php/UnRAID_Manual_5

Here's a link that states the 9YN166 is made in Thailand and the 1CH166 is made in China and is stuck on firmware CC43. http://forums.seagate.com/t5/Barracuda-XT-Barracuda-Barracuda/st3000dm001-made-in-China-not-fit-for-purpose/m-p/176760/highlight/true