frodr

I was able to get it running, when I set "Enable Network Connection(s) to No. Last time I had it running, it was always Yes.

I used to have this plugin running. But now its Connection fault. DOuble and triple check ip/user/pass. Done bmc reset, reinstalled plugin. Can't get to connect. Don't see anything in system log. // Frode kjell-diagnostics-20260820-1436.zip

"If you don't see the idiot in the room, its you,"This time, me. I moved my PC til the same same VLAN as the server, but had a an override in Unify setup that kept it on the original VLAN. I removed that, and now I get container GUI.

After PIA changed IP's servers and new conf files is installed, no GUI on the containers on wg0/wg1. Hand shake and ping is ok, no error in container logs. I used to run user script to handle return traffic. I have added another WiFI point on the same VLAN as the server run on. So, no need for this user script. I also tried an tunnel with Mullvad VPN, same issue. Grateful for help. // Frode kjell-diagnostics-20260729-2257.zip

When applying number of VF on iGPU, I get this error; Error: Failed to change VF configuration: Failed writing to /sys/bus/pci/devices/0000:00:02.0/sriov_numvfs: file_put_contents(): Write of 1 bytes failed with errno=2 No such file or directory Claude says that iGPU and XE drivers crashes and suggests adding to syslinux: "append initrd=/bzroot intel_iommu=on iommu=pt i915.enable_guc=3 modprobe.blacklist=xe" I have not yet tried that. What is the correct way to fix this? Cheers, // f kjell-diagnostics-20260611-0638.zip

I downloaded new config files thru PIA-WG-Config-Generator, it handskakes and pings, but not connection for connected containers. I had Ed support on it last time it didn`t works, then handshaking was not working. This time handshaking is working. Do I need any port forwarding? Happy for feedback. // Frode kjell-diagnostics-20260312-1415.zip

I am removing the dns admin from Cloudflare to original registrar. The SWAG setup is as SpaceinvadeOne setup video. My registrar do not have a dns plugin. But I like to keep dns admin at the registrar. How can/should I go about to set the up. I tried changing validation to http and remove the line "dns plugin". The LetsEncrypt insist on port 80.

Hi, I want to run isolated firefox browsers, and added a custom docker network to run a firefox container. It works, but is quite sluggish, especially when first time loading a home page. The server includes a AdGuard Home/Unbound dns setup. The firefox container passed traffic thru Docker DNS (127.0.0.X) which is the suspected reason why browsing is sluggish. Forcing --dns 10.10.50.60 in Extra parameters brakes the container. Running macvlan in the server. Any recommendation how to setup? //F

trying to delete this one. Moved it to the Docker Container part. //F

It isn´t a risk of loosing my pool, unless I screw up. “What´s the point of troubleshooting if you never make any trouble……" But something strange happened during transcoding since available space read 0T. Any my not so qualified friend said I had a “ZFS-collapse” and should delete files to get below 80%. I guess keeping zpools under 80% usage is a good advice.

So …./filmer is empty, but shapshots at about 23TiB? Would I be able to rollback with only 10TB available? This one below is correct?

Outputs.rtf

It was showing 0T after 1-2 hours in the Unmanic transcoding. After deleting about 30T, it now reads only 10T available. In…./filmer there is 0 files, still: root@kjell:~# zfs get -Hp used lageret/media/filmer lageret/media/filmer used 25095390259344 - Yes, rebooted several times.

This is an urgent one for me. In the server “kjell”, it is a ZFS pool of 10 x Samsung_SSD_870_QVO_8TB, plus special. The media library holds 95% of used space. And when the desbribed issue occurred, about 52T of 64T was occupied. I was running a transcoding job in Unmanic on this server, and another Unmanic job on the other server (helmaxx) on a different media share on the first server. At the same time I was trying to setup a second GPU on the second server (helmaxx), controlled from Unmanic on the first server (kjell) with help from Unmanic Discord forum. The second GPU Unmanic container started to report receiving jobs, but only one or two workers actually did any work. After a while, first server (kjell) reported 0T available. Troubleshoot was done with my good!?? help Chat, which reported ZFS “collapse”. Chat recommended to delete files to usage below 80%, and ZFS should be ok again. Several attempts, and I risk loosing the pool altogether. I deleted a lot of files, and see strange 0 files in …../filmer and at the same time 25T usage. It is a way to solve this? That would be something….. // frodr root@kjell:~# zfs get -Hp used lageret/media/filmer lageret/media/filmer used 25095390259344 - root@kjell:~# zfs get -Hp logicalused lageret/media/filmer lageret/media/filmer logicalused 25215583430656 - root@kjell:~# zfs get -Hp used lageret/media/serier lageret/media/serier used 20942021724592 - root@kjell:~# zfs get -Hp logicalused lageret/media/serier lageret/media/serier logicalused 20999065692160 - root@kjell:~# ls -lh /mnt/lageret/media/filmer total 0 NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT lageret 74.6T 61.2T 13.4T - - 0% 82% 1.00x ONLINE - raidz1-0 36.4T 30.5T 5.83T - - 0% 84.0% - ONLINE sda1 7.28T - - - - - - - ONLINE sdb1 7.28T - - - - - - - ONLINE sdc1 7.28T - - - - - - - ONLINE sdd1 7.28T - - - - - - - ONLINE sde1 7.28T - - - - - - - ONLINE raidz1-1 36.4T 30.6T 5.76T - - 0% 84.2% - ONLINE sdf1 7.28T - - - - - - - ONLINE sdg1 7.28T - - - - - - - ONLINE sdh1 7.28T - - - - - - - ONLINE sdi1 7.28T - - - - - - - ONLINE sdj1 7.28T - - - - - - - ONLINE special - - - - - - - - - mirror-2 1.86T 34.2G 1.83T - - 14% 1.79% - ONLINE nvme4n1p1 1.86T - - - - - - - ONLINE nvme5n1p1 1.86T - - - - - - - ONLINE kjell-diagnostics-20251204-1657.zip

That worked. Thanks!