ruthlessone

We are! Is the discord channel used?

Both Brave and Edge report 192.168.86.250 refused to connect. going to http://

just re-deleted again and booted up. ERR_CONNECTION_REFUSED when trying to browse to the webgui

Hey Forty Deaux, I have.. No dice .

Here is my diagnostics file. tower-diagnostics-20220621-1137.zip

My unraid on that box is 6.9.2.... Any other ideas appreciated!

on it!

tried deleting the SSL folder contents no dice on providing access to the WebGUI

Found this line: Jun 21 11:29:29 Tower ntpd[1686]: 216.239.35.12 local addr 192.168.86.250 -> <null>unable to load certificate

Ah perfect, greetings Jon. yessir i now have the file. Safe to attach here?

Jonathan P from WAY WAY BACK in the beginning days of Unraid?? re: Jumbo Frames: Probably not, since I am not familiar with it?

Browsing the web portal returns nothing. I have no issue pinging the IP and I can see the box on the router at the right IP. What do I need to provide to troubleshoot? It has been bulletproof for many years. AMAZING software!

Update, I switched the cable to the last SATA on the MB and the drive shows up with no errors at all. So it's the controller. Help?

Greetings Subject Matter Experts! So I am setting up a second Unraid server with an old I7 machine I had laying around. I also got a 5 in 3 Harddrive cage to put in all the old 2TB drives I had replaced in my main server with bigger ones. I have an Unraid PRO license on this second machine and I have 3 10G cards (recognized device below) and a switch I am going to connect the 2 unraid and my main PC to on a separate network, I'll tackle this later. [15b3:6750] 01:00.0 Ethernet controller: Mellanox Technologies MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s] (rev b0) So I have a marvell sata below, and was working no issues in unraid on another motherboard WITH THE SAME HARDDRIVES and cables. Changes are motherboard, CPU and RAM, and using a brand new unraid image on registered USB. [1b4b:9230] 04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11) Everything boots up no issue with no sata cables plugged in. As soon as I plug in a harddrive into the Marvell controller it throws this during boot. Unraid sees the 5 HDs that are connected to the sata on the MB but not the ones connected to the marvell. Need some troubleshooting assistance please! What to do first? I have switched sata cables same result. I was getting COMRESET failed (errno=-16 and 32) errors at times when more than one drive is hooked up. Currently, the one in the syslog attached, only the 1TB 10kRPM cache drive which was jsut precleared and working no problem just before switching the MB CPU and RAM. syslog.txt

Thanks for the lesson Bin! That change worked. I hope helps others! Webgui Popped right up after. Will report other issues if they arise!

hmmm my google wifi is the gateway, hardwired to my AT&T modem, DMZd. Below are my windows and linux ip configs. I did have the gateway in there, what am I missing here? Feeling pretty dense... I am continuing to read that thread, good info in there. But if this lan_network stopping me, I am not getting it. Ethernet adapter Ethernet: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30) Physical Address. . . . . . . . . : 5C-F9-DD-E1-F9-FE DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::542a:4366:a9b7:e8c2%18(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.86.242(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, April 17, 2019 2:21:48 PM Lease Expires . . . . . . . . . . : Tuesday, April 23, 2019 1:41:02 PM Default Gateway . . . . . . . . . : 192.168.86.1 DHCP Server . . . . . . . . . . . : 192.168.86.1 DHCPv6 IAID . . . . . . . . . . . : 89979357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-04-0A-D6-5C-F9-DD-E1-F9-FE DNS Servers . . . . . . . . . . . : 192.168.86.1 NetBIOS over Tcpip. . . . . . . . : Enabled LINUX eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.86.119 netmask 255.255.255.0 broadcast 192.168.86.255 inet6 fe80::d250:99ff:fe60:459b prefixlen 64 scopeid 0x20<link> ether d0:50:99:60:45:9b txqueuelen 1000 (Ethernet) RX packets 15231190 bytes 8381314785 (7.8 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30528174 bytes 41731708780 (38.8 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Attached, thank you ever so kindly. supervisord.log

so I have everything up and running, my VPN creds in everything seems to be configured correctly, the docker runs, and stays running. However when I go to launch the webgui. it just spins on loading. Here is the last bit of the log.. any ideas that could nudge me in the right direction? 2019-04-20 08:36:14,551 DEBG 'watchdog-script' stdout output: [info] SABnzbd not running 2019-04-20 08:36:14,551 DEBG 'watchdog-script' stdout output: [info] Attempting to start SABnzbd... 2019-04-20 08:36:44,047 DEBG 'watchdog-script' stdout output: [warn] Wait for SABnzbd process to start aborted [info] Waiting for SABnzbd process to start listening on port 8080...

Hi All, I am having a networking issue with this docker. It installs just fine, when I get to the wizard and enter in my paid Usenet, any Usenet for that matter, I pay for 2, and there are solid free ones. ALL of them immediately error out (like it cant even get to the internet) with [Errno 99] Address not available Check for internet or DNS problems. I have google's DNS setup in my networking settings for unraid. The response run from the docker terminal ca /etc/resolv.conf just shows the google DNS. I spun up NZBget as a test and its functioning the same way! Any ideas?

OK done and the result of the cat /etc/resolv.conf within the container is: sh-5.0# cat /etc/resolv.conf # Generated DNSv4 entries: nameserver 8.8.8.8 Same behavior with the docker trying to find the usenet, no matter which I try, the same immediate response. [Errno 99] Address not available Check for internet or DNS problems

Not sure how to change that? Command line? Variable? suspect you think I a bit more advanced than I really am.

sh-5.0# cat /etc/resolv.conf # Generated DNSv4 entries: nameserver 8.8.8.8 nameserver 192.168.86.1 Ok, so mine doesn't, what does that mean?

Duh sh-5.0# cat /etc/resolv.conf # Generated DNSv4 entries: nameserver 8.8.8.8 nameserver 192.168.86.1

@Mothership:~# cat /etc/resolv.conf # Generated DNSv4 entries: nameserver 8.8.8.8 nameserver 192.168.86.1 then in container.. sh-5.0# cat /etc/resolve.conf cat: /etc/resolve.conf: No such file or directory sh-5.0#

Here it is in advanced view, Umask? Doesn't seem to be any DNS entries. I can add, just need to know what to fill in.