J05u

Any idea how I can make Win11 working? Created win 11 vm but can't connect using guacamole

powertop autotune should be entered inside powertop, or I can just run in terminal? can't figure out where I can run it inside powertop in terminal

Hello, yesterday by some reason my box started to do parity check (there was no hang ups and shut downs) Now first time i am seeing Sync errors corrected: 154961 I logs I can see error in logs - Nov 27 00:35:59 Fortress kernel: pcieport 0000:00:1d.0: AER: Corrected error received: 0000:78:00.0 Nov 27 00:35:59 Fortress kernel: nvme 0000:78:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Nov 27 00:35:59 Fortress kernel: nvme 0000:78:00.0: device [15b7:5011] error status/mask=00000001/0000e000 Also as notifications I see something like this for diffent sectors. Nov 26 17:30:12 Fortress kernel: md: recovery thread: P corrected, sector=1024 My NVME drives are almost new... What can be wrong with my system? Can this be related with drive which one before was empty, but now got some data on it? fortress-diagnostics-20221127-0311.zip

Biggest question if Samba from versions 2 and 3 is fixed…?

Hello, Any idea why I can't start file activity?

Any chance that this will be supported for 11th gen graphics?

When I run autotune i am getting powertop: /lib64/libncursesw.so.6: no version information available (required by powertop) powertop: /lib64/libtinfo.so.6: no version information available (required by powertop) modprobe cpufreq_stats failed Loaded 0 prior measurements Cannot load from file /var/cache/powertop/saved_parameters.powertop File will be loaded after taking minimum number of measurement(s) with battery only RAPL device for cpu 0 RAPL device for cpu 0 Devfreq not enabled glob returned GLOB_ABORTED Cannot load from file /var/cache/powertop/saved_parameters.powertop File will be load In tunables all showing as good But in Pkg(HW) as on screenhot bad, all zeros What i can do to fix it?

issue is that case can accep[t only SFX Maybe i will need to move to Node 304 in the end of day

Just curious, which PSU will be more efficient for SFX build? I want to move my 5 drives, 2 ssd and 2 nvme to small form factor with HBA card. (i5 10400) I see only SF450 from Corsair being small and good rating

Do i need to re-install system temp? I am not sure if new driver is loaded, not the old one as by name they looks the same

I installed Tdarr v2 with node in, added extra parameters for runtime nvidia, driver capabilities and visible devices Node enabled set to true, but Tradd don't see any nodes inside. What I am doing wrong, can you please help Fixed myself, need to set as host network type

Can't connect to Redis, anyone managed to get this working?

I have with qbittorrent and plex Offline 500 error, not able to see download speed or plex library. No problem to open links

What you will do with this hardware and 1080ti?) Curious if you need to do anything with this hba like flashing in IT mode ?) I was thinking about same card as I want to create cool ssd downloads share to make my drives sleep most of time

it means system can run both pcie full size slots as x8 each?

Did you sort it ? I am considering to downsize to this board

So how it ended up ?) I have same issue

To be honest not sure what does it mean )) but I will try to replace psu. Strange, as this psu was rock solid for my Unraid for 1.5 year with my z170 motherboard

there is not much load either...i need to find spare psu to test

This is Evga Supernova G1 + 750w. My box consumes no more than 150w at all. If i understood right it's 62 amps. But server should shut down, no if it's a power loss?

Seems like just restarts. I just noticed almost every time parity checks. I don't think this is power issue, server is connected to ups Diagnostics attached Last time i got this issue and again no one understood what happened. After i rebuild flash i believe crashes stopped fortress-diagnostics-20220714-1454.zip

Anyone?

Hello, can't see what is going on with my box. Not first day when my box just restarts or i don't know what happening. All the time this happens in the morning. I mirrored syslog to cache drive, can you please have a look and guide me where to dig? syslog-192.168.0.78.log

Yeah, thank you. I posted my question, after found setting and enabled what I need. I don’t know how I missed this initially

How i can enable password protection to the share which i create on unassigned drive? And is it anyway have also that share hidden?