sanjonline

I have managed to install UnRaid on dell R510 and can see and use all 12 disks that are in the drive bays. I have also attached a 24bay Netapp disk shelf which is connected with a Netapp 10GB HBA. Unraid picks up the Netapp HBA and seems to be able to see all the disks in the disk tray, However I can't seem to be able to add the disks to a new array. See below: Disk Information GroupTrayPathLogical Unit NameManufacturerDevice ModelSerial NumberCapacityRotationForm FactorSMART StatusPower On HoursLoad Cycle CountPurchasedWarrantyComment tray116:0:47:0TOSHIBA 5SVB320C EMC320058P0A08JT3EE3.2TB2.5 inchesPASSED2421 tray126:0:46:0NETAPP X422_HCOBE600A10KWKDXZSU609.5GB10020rpm2.5 inchesPASSED30177 tray136:0:48:0TOSHIBA 5SVB320C EMC320037E0A00QT3EE3.2TB2.5 inchesPASSED10614 tray146:0:49:0NETAPP X422_HCOBE600A10KWKAYSBX609.5GB10020rpm2.5 inchesPASSED30177 tray156:0:50:0NETAPP X422_HCOBE600A10KWKDBK6U609.5GB10020rpm2.5 inchesPASSED30177 tray166:0:51:0NETAPP X422_HCOBE600A10KWKDBH9U609.5GB10020rpm2.5 inchesPASSED30177 tray176:0:52:0NETAPP X422_HCOBE600A10KWKDTBYU609.5GB10020rpm2.5 inchesPASSED30177 tray186:0:53:0NETAPP X422_HCOBE600A10KWKDK37U609.5GB10020rpm2.5 inchesPASSED30177 tray196:0:54:0NETAPP X422_HCOBE600A10KWKDD6VU609.5GB10020rpm2.5 inchesPASSED30177 tray1106:0:55:0NETAPP X422_HCOBE600A10KWKDT2UU609.5GB10020rpm2.5 inchesPASSED30178 tray1116:0:56:0NETAPP X422_HCOBE600A10KWKDKKYU609.5GB10020rpm2.5 inchesPASSED30177 tray1126:0:57:0NETAPP X422_HCOBE600A10KWKDMJXU609.5GB10020rpm2.5 inchesPASSED30177 tray1136:0:58:0NETAPP X422_HCOBE600A10KWKDBD2U609.5GB10020rpm2.5 inchesPASSED30178 tray1146:0:59:0NETAPP X422_HCOBE600A10KWKDLA7U609.5GB10020rpm2.5 inchesPASSED30178 tray1156:0:60:0NETAPP X422_HCOBE600A10KWKDW21U609.5GB10020rpm2.5 inchesPASSED30177 tray1166:0:61:0NETAPP X422_HCOBE600A10KWKDMRKU609.5GB10020rpm2.5 inchesPASSED30177 tray1176:0:62:0SEAGATE ST9146852SS3TB1C1AS146.8GB15015rpmPASSED61658 tray1196:0:64:0FUJITSU MBD2147RCD2A4PB2031HS146.8GB10025rpm2.5 inchesPASSED51842 tray1206:0:65:0FUJITSU MBD2147RCD2A4PB2031J1146.8GB10025rpm2.5 inchesPASSED45337 tray1216:0:66:0SEAGATE ST9146852SS3TB1D3VA146.8GB15015rpmPASSED61778 tray1226:0:67:0SEAGATE ST9146852SS3TB1CCHL146.8GB15015rpmPASSED61652 Has anyone been able to attach a Netapp disk tray and then be able assign the disk to the array so you can use the storage.

Thanks MrBilky Your solution fixed my problem, one of the 10GBe nics on my Hypervisor had taken the IP address for some reason, so I move them to another subnet and reconfigured the vlans on router, rebooted all the servers and switches and now everything seems to have come back to normal. Don't know why it didn't it in the first place, hopefully now it won't happen again. Thanks for your help.

I do have a static IP I set. Could this be the issue? I know with the Meraki gear it does take some time for the device configs to get updated when network changes occur, and sometimes they do not enable the changes when saved if theirs is a issue, so when you reboot the router it does on occasion download a older version of the config. Minor issue with cloud managed networking gear. I may have to send a ticket to Meraki to investigate and see what they can see on their side of things, as I don't get complete visibility of the Meraki config or log files which Meraki support do from their side.

Yes I can ping the google DNS servers from the unraid console, and can see traffic flowing through my Meraki MX device going to and from the internet. The address that it is redirecting too 5d542e36944d6ed1f174c2a8549e087db16d101c.unraid.net, what is this address and is the server trying to get some sort license check or something from unraid. Is there any other ports apart from port 80 or 443 that will need to be open.

Hi Guys, I have been trying for 3 days now to get back into my unraid server, Unfortunately I run my VM's of the server using it for NFS storage on VMWare hypervisors. On Friday we had a network outage where I had to reboot my router and since then I am not able to access my Unraid server. I can ping the ip address I allocated to it, and can see that the ip address is correctly configured, but everytime I try to browse to the server it just redirects to a address 5d542e36944d6ed1f174c2a8549e087db16d101c.unraid.net then times out. I have tried from multiple computers and have also tried to ping the gateway from the unraid console whic works. Currently all my servers are now down and can't access any of my storage from any device. Please help? Last thing i want to do is blow this server away as it contains all my data and is primary storage device that I use.