PvD
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by PvD
-
-
How can I delete a wg interfaces?
there's no button in the interface.
You need to change the Tunnel view from „Basic“ to „Advanced“. The toggle is located Between the „Active“ and „Autostart“ toggle in the top Right corner of the Tunnel.
After that you will find the Delete Tunnel button in the Bottom Right corner of the Tunnel configuration.
- 1
-
Can confirm this problem.
In the moment i use a network in firewall the tunnel cant be started.
Do you have 2 network cards/links maybe?
My current setup only features one Network Card with one Ethernet port. -
Dang, thought I was onto something there
Assuming you are on the latest version of Unraid with the latest version of the plugin, I am out of ideas. It works for me, I don't understand why it isn't working for you.
Okay thank you for your help. Then I need to find a solution which doesn’t involve the WireGuard Firewall. -
Yes I block the right IP. I want to block 192.168.0.114 (I tried other Ip addresses too, no difference).
I think the 192.168.10.188 is the ip from your post earlier if I am not completely wrong(?).
192.168.0.1 is my Router
192.168.0.10 Unraid Server
192.168.0.114 IP to block -
21 hours ago, ljm42 said:
According to the syslog, the tunnel was started, then stopped, then started again:
Jul 29 22:14:10 PvD-Unraid wireguard: Tunnel WireGuard-wg1 started ### [PREVIOUS LINE REPEATED 1 TIMES] ### Jul 29 22:14:28 PvD-Unraid wireguard: Tunnel WireGuard-wg1 stopped Jul 29 22:14:29 PvD-Unraid wireguard: Tunnel WireGuard-wg1 started
So it looks like it is working correctly? Can you restate the problem? What went wrong with the final time it was started at 22:14:29?
I made a short video which hopefully shows my problem. The Syslog shows the start of the tunnel, but the Dashboard shows "Inactive" as State und the Switch won't accept the new state. Is there a way to start a Tunnel with the help of a Console command or another log file with more information?
-
23 hours ago, ljm42 said:
I don't normally use the firewall feature, but I just tested it with "Rule: Deny" and "192.168.10.188/32" and it did what it was supposed to do. I tried with "192.168.10.188" (no "/32") and it worked correctly too.
Since you are saying the tunnel won't start, there may be a clue in your syslog. To make it easy to find, first remove the problematic setting and start the tunnel, just to prove that it works. Then add the firewall IP back and restart the tunnel showing it fails. Then go to Tools -> Diagnostics and download the zip file, then upload the zip file to your next post.
Thank you for your help. Attached is the Diagnostics Zip.
-
Dynamix WireGuard VPN
in Plugin Support
Posted
You need to change the tunnel view from „Basic“ to „Advanced“. The toggle is located between the „Active“ and „Autostart“ toggle in the top Right corner of the tunnel.
After that you will find a delete tunnel button in the bottom right corner of the tunnel configuration.