ukkeman

Members
 View Profile  See their activity

  • Posts

    38

  • Joined

  • Last visited

 Content Type 

Everything posted by ukkeman

  1. ukkeman
    ahh another point i missed. i switched gpu order in the board some month ago so that i can see cli and have a passthrough. Thats why i do not need that anymore. Cause i was sure i tried without rom and ovmf. Thanks for clearifying again.
  2. ukkeman
    Yes. That's it. Last night I read again how to do this. And my setup and settings never changed since my GTX 960 or so. This said: - do not use a rom - do use ovmf * If you have a more recent GPU That's it.
  3. ukkeman
    Does nobody have an idea why the boot process is not shown? Nor the post of the bios?
  4. ukkeman
    Hey there im having, since kinda ever, the issue that all my VMs (windows 11, linux etc) are all booting with a blackscreen until the login screen of windows/ubuntu/ fedora is shown. I'm unable to see the virtual bios posting or an update of a kernel or windows update. Everything else is working just fine like audio opengl etc. Attached is my vm.xml for a linux variant vm.xml
  5. ukkeman
    Changed Status to Closed
  6. ukkeman
    Changed Status to Solved
  7. ukkeman
    yes i do, i wanted to use it for snapshoting. is it a known issue / feature? ahh well, it tries to receive the snapshots?
  8. ukkeman
    there is no timeout > 10 minutes, cause that is the time i waited until i forcefully shut it off
  9. ukkeman
    i observed that ALWAYS the zfs (disk 5) boots up first like it tries to retrieve some status or so when going to the maintab.
  10. ukkeman
    did not change anything but seems to work again.
  11. ukkeman
    Currently my array is kind of always on and spins up even if manually spun down. When i spin them down it only takes several seconds until they spin up again. I can not find any reason why they wake up, File Activity plugin does not show anything, grep around with lsof on the terminal does not show anything. I tested with : - VM Manager disabled - docker container disabled. - smb disabled (no other share system has been enabled) - Most of the plugins have been removed. - no share has array as a second storage The log shows read smart data and i had that in mind for a second, but as i learned from other threads here, it reads smart values when spinning up and is not the cause to spin up. It stays down until i visit the main tab again. For the sake of completenes: i changed two things: 1. upgraded to 6.12 2. added another drive to the array formated as zfs to a pool where the rest is formatted as xfs.
  12. ukkeman
    ok yes it seems to be working when array is nout mounted. will do some more testing
  13. ukkeman
    Did not test. Currently pre clear is running, if that is done I'll test and come back with the result of the test.
  14. ukkeman
    yes it just stops fine.
  15. ukkeman
    works on my machine: version 114.0 on linux,
  16. ukkeman
    Hey there when i shutdown unraid it does not do a clean shutdown, but waits forever. Last command issued is: "Starting diagnostics collection..." and stays there forever (at least i waited 10 minutes until i hard reset the machine). When i run the diagnostics through cli the file is created fairly fast after some seconds.
  17. ukkeman
    i see the same, its pretty unresponsive after some time, like i can not open up the syslog anymore and the dashboard takes very long to load. This reminds me of some error unraid had with nchan on, 6.5.x (as far as i remember)
  18. ukkeman
    tried this: but it this does not seem to work anymore. like there is no pid anymore in run. Will see if i can modify it and get it to work
  19. ukkeman
    I tried adding some sysctl commands to br0 device like addr_gen_mode=2 and some stable_secret. The secret is added and kept, but not the gen mode it is set to 1 no matter what i do. So there seems to be some `ip link set` or some other default when br0 is added.
  20. ukkeman
    Hey, i'd like to configure the suffix of the ipv6 address of br0 (br0 only maps with eth0 and docker/vms of course here). I see that addr_gen_mode is set t0 zero. The goal is to have a static suffix ipv6 for the br0 device. What is the best and persistent way to do this on unraid? It wont be a problem to edit files on the boot/config dir or add custom bash shell scripts. Any hints greatly appreciated.
  21. ukkeman
    I am unable to specifically reproduce it but when playing with a second interface, setting it to ipv6 and ipv4 only and back and to ip4 + ipv6 and just play with a second interface it sometimes resets eth0 and eth1. The network.ini file in /var/local/emhttp then is broken and includes only the last 4 lines. I tried to eliminate a race condition (2 requests trying save at the same time), but sometimes managed to reproduced it even if when waiting several minutes between requests.
  22. ukkeman
    in firefox waiting helped, even though it took several minutes.
  23. ukkeman
    ok then the option to ipv6 only should have been removed in the first place. i had similar issues with ipv6 + ip4v. but the way to reproduce was slightly different. Should i add here or open a new issue for that?
  24. ukkeman
    Since upgrading to 6.11.0 im unable to view or download the peer configuration is unusable. After click there are two calls against the unraid server - a websocket call against sub/changes which never results into anything and is always pending - an http call against: webGui/include/StartCommand.php POST with data: `wg_config peer-tron-wg1-4 /peers nchan` which results in a single int the lghtbox below opens and nothing happens anymore. Logs are clean, `systail -f /var/log*` is also clean. My server does not run on the default 443 port but on 1443 and my hoster just thrown me under te bus with a surprise ipv6 DS lite account. I tried this qr code generation on chromium and firefox (on linux) through ipv4 and ipv6 and hostname to eliminate that one of those things is an issue.
  25. ukkeman
    i missed that im on stable 6.11.0