-
Posts
1132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by optiman
-
-
It's a mystery of how I ended up with those DNS settings, as I did not change them. I didn't even know about Open DNS until I searched for these.
Thanks for confirming they are safe and good option.
-
I recently noticed that my Unraid server DNS settings have changed, and I didn't change them. Not sure if this is part of the standard Unraid install or upgrade now, or something else. The new DNS servers are:
208.67.222.222
208.67.220.220
After a search, these are listed as Open DNS and they look to be hosted in San Francisco, Ca.
I do have a 3rd DNS server listed, 8.8.4.4, which is Google and I had set that one a long time ago.
1. Are the Open DNS servers part of the default for Unraid now?
2. Are they safe to use?
3. From a performance perspective, are they the best choice?
Thanks!
-
Upgraded from 6.12.3 to 6.12.6 without issues.
I only had one server crash on 6.12.3, where my server froze and I had to hard reboot.
-
On 10/10/2023 at 5:43 PM, ConnerVT said:
I am using this one. - https://www.amazon.com/gp/product/B09SSD3HMB
Intel i225, PCIe x1 slot, ~$25 USD. I originally started with a Realtek card, but I couldn't get it to work reliably near 2.5Gb speeds in both directions with the other two 2.5Gb capable devices on my network. Installed it when running 6.10.3, now on 6.12.4. Plug and play. No issues.
@ConnerVT Thanks for posting that link. I too am looking to add a 2.5 and I was going to try the TRENDnet TEG-25GECTX which has the Realtek 8125 chipset, until I read this thread. Given the IO CREST with intel chip is plug and play with unraid, no brainer. Thanks again!
-
1
-
-
The nzbToMedia script is no longer running and I have already confirmed I still have the latest version. I have not changed anything.
@binhex Has something changed with this docker?
-
On 8/14/2023 at 1:41 PM, binhex said:
if the issue is with a third party script (which it looks like it is, right?) then you will need to raise an issue and say the script is not compatible with the latest version of sabnzbd, a quick google looks like you would raise an issue here:- https://github.com/clinton-hall/nzbToMedia/issues
EDIT - looks like this is a match for your issue, your script is out of date most likely:- https://github.com/clinton-hall/nzbToMedia/issues/1960
After updating the script and installing the latest version of your docker, the script is now working again, thank you!
For referrence, this is what they had me do:
do a git pull from within the Docker terminal.
Once you are connected via terminal (as the appropriate user) try the following commands to do a git pull (and clean etc)
cd /nzbToMedia
git reset --hard
git pull
git clean -i
The last step to clean didn't work. I'm waiting for a reply to find out why -
thank you sir! I submitted a ticket as suggested.
-
@binhex Any update on fixing this? I'm still on 4.0.1-1-01, which is working fine.
-
@binhex Since the last update, my nzbtomedia stuff is broken and I'm getting the below errors from the sabnzbd gui when the script tries to run.
I'm going to rollback. Which version should I rollback to?
Traceback (most recent call last): File "/nzbToMedia/nzbToSickBeard.py", line 275, in <module> import nzbToMedia File "/nzbToMedia/nzbToMedia.py", line 732, in <module> eol.check() File "/nzbToMedia/eol.py", line 101, in check warn_for_status(version, grace_period) File "/nzbToMedia/eol.py", line 142, in warn_for_status days_left = lifetime(version) ^^^^^^^^^^^^^^^^^ File "/nzbToMedia/eol.py", line 72, in lifetime time_left = PYTHON_EOL[(major, minor)] - now ~~~~~~~~~~^^^^^^^^^^^^^^^^ KeyError: (3, 11)
any ideas on what is causing this? I've no issues with this script for years, so something has changed.
Thanks!
Update: rolled back to 4.0.2-1-02, same errors:
Traceback (most recent call last): File "/nzbToMedia/nzbToSickBeard.py", line 275, in <module> import nzbToMedia File "/nzbToMedia/nzbToMedia.py", line 732, in <module> eol.check() File "/nzbToMedia/eol.py", line 101, in check warn_for_status(version, grace_period) File "/nzbToMedia/eol.py", line 142, in warn_for_status days_left = lifetime(version) ^^^^^^^^^^^^^^^^^ File "/nzbToMedia/eol.py", line 72, in lifetime time_left = PYTHON_EOL[(major, minor)] - now ~~~~~~~~~~^^^^^^^^^^^^^^^^ KeyError: (3, 11)
Going to try 4.0.1-1-01
Update: rolling back to .0.1-1-01 resolved the issue, no more errors. Will stay on this version until fixed
-
upgraded from 6.11.1 to 6.11.4 without any issues
-
Mine hasn't done it for about 2 weeks, not sure why and I thinking it will return. I never did get a response to the post
-
On 10/7/2022 at 10:29 AM, optiman said:
@binhex I am getting the following errors in SABnzbd:
ERROR 16 hours ago [06/Oct/2022:18:24:30] ENGINE Error in HTTPServer.serve
Traceback (most recent call last):
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/server.py", line 1823, in serve
self._connections.run(self.expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 203, in run
self._run(expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 246, in _run
new_conn = self._from_server_socket(self.server.socket)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 300, in _from_server_socket
s, ssl_env = self.server.ssl_adapter.wrap(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 331, in wrap
return s, self.get_environ(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 339, in get_environ
'SSL_PROTOCOL': cipher[1],
TypeError: 'NoneType' object is not subscriptableAny ideas?
@binhex I'm still seeing these errors. Any ideas? Even though I get the errors, everything seems to still be working.
-
9 hours ago, Jhp612 said:
Failed upgrade for me. Everything seemed fine, now it just loops when trying to reboot and load the OS... any suggestions welcome.
Replaced the root files with the files stored in the "previous" folder to rollback and im back up. I also tried updating the bz files from the 6.11.1 download from the website with the same results with the system not loading.
Once 6.11 was working tried to upgrade again to 6.11.1 and observed the same (failed) behavior. I am running a asrock taichi x299 with intel processor if that helps
You most likely already tried these suggestions, but did you run a file check / or reformat your usb drive, or even trying another usb drive? Did you try booting into SAFE mode? If SAFE mode works, grab the diag file. Maybe search through the logs. Did you check to see if asrock has a bios update for your mb? Try turning off all dockers and VM's before upgrading. Did you run the Fix Common and Upgrade assistant checks?
This issue comes up from time to time for some people. Let us know what the solution was once you sort it out.
-
Uninstalled nerdpack and upgraded from 10.6.3 to 6.11.1, no issues.
-
@binhex I am getting the following errors in SABnzbd:
ERROR 16 hours ago [06/Oct/2022:18:24:30] ENGINE Error in HTTPServer.serve
Traceback (most recent call last):
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/server.py", line 1823, in serve
self._connections.run(self.expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 203, in run
self._run(expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 246, in _run
new_conn = self._from_server_socket(self.server.socket)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 300, in _from_server_socket
s, ssl_env = self.server.ssl_adapter.wrap(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 331, in wrap
return s, self.get_environ(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 339, in get_environ
'SSL_PROTOCOL': cipher[1],
TypeError: 'NoneType' object is not subscriptableAny ideas?
-
1
-
-
For those using v2022.02.20-01, you can now upgrade to the latest version. The gui issue was fixed.
-
1
-
-
2 hours ago, johnwhicker said:
Now that's troubling
Should we all expect this when upgrading from 6.9.2 to 6.11.0? And is there a way to clean / clear the corruption before upgrading? What will the path forward be?
I would replace the hard drive and then upgrade.
-
@binhex I hope you are doing well. How will we know when the UI issue is fixed? I have my docker set to specifically get v2022.02.20-01 and I'm waiting to change the config to "latest".
On another note regarding all of your popular docker apps, I was just reading that upgrading to 6.11 requires the removal of Nerdpack. Some plugins are now part of unraid, but others have to be manually installed if they are still required.
One of the dockers I installed (maybe more) included instructions to install NP to add perl, unrar, Python, etc. I don't recall if it was any of yours. Does any of your dockers need any of these apps?
If not, I'm going to uninstall the above and NP and upgrade to 6.11. If they are still needed, I'll have to dl and install manually now before upgrading to 6.11.
Thanks!
-
On 9/25/2022 at 10:40 AM, BasementGamer said:
I found the instructions on this thread. The short version, you need to manually download the packages from Slackware 15, then put them in /boot/extra, and the packages will be automatically installed on reboot. Or, if you don't want to reboot, you can manually install them with installpkg <pkgname>
Thanks - very helpful
-
maybe try to clear your browser cache
-
On 9/23/2022 at 1:25 PM, TRaSH said:
This should be added in bold text to the changelog including instructions how to load the necessary packages !!!Yes please. Glad I read about NP here before just upgrading. Are there instructions on where to find and how to load the packages in 6.11 ? I don't have that many packages loaded, but I would expect to run into issues if NP just goes away.
I recall needing python and perl, but I'm not even sure when the others got loaded
I also have these two that always say Ready for Update, but after you do that, they return to Ready for Update. Again, not sure when these were added either
-
you should have downloaded and posted your diag file while on 6.10.3
-
@binhex I'm seeing this in my queue as an error
[26/Aug/2022:18:19:22] ENGINE Error in HTTPServer.serve
Traceback (most recent call last):
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/server.py", line 1823, in serve
self._connections.run(self.expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 203, in run
self._run(expiration_interval)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 246, in _run
new_conn = self._from_server_socket(self.server.socket)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/connections.py", line 300, in _from_server_socket
s, ssl_env = self.server.ssl_adapter.wrap(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 331, in wrap
return s, self.get_environ(s)
File "/usr/lib/sabnzbd/venv/lib/python3.10/site-packages/cheroot/ssl/builtin.py", line 339, in get_environ
'SSL_PROTOCOL': cipher[1],
TypeError: 'NoneType' object is not subscriptable -
Ok, thanks for looking into it. I'll just stay where I'm at until you confirm it's ok to move the latest. I'm happy to test it when you're ready.
6.9.x, LSI Controllers & Ironwolf Disks Disabling - Summary & Fix
in General
Posted
Have you checked to see if a firmware update is available? I had to update the firmware on one of my drives before it would work. Even if there is no update, try flashing the firmware anyway, can't hurt.