tknx

Here they are! Also just noticed that half my dockers say no container after reboot. I feel like my system is just falling apart! mnemosyne-diagnostics-20220617-1254.zip

I was having a weird issue before which I thought I had managed to fix, but apparently not. I manually upgraded my system to 6.10.3 and now the UI crashes and other functions don't work correctly. Even to get diagnostics to download, I have to do an unclean reboot since the reboot crashes. I have no idea what is wrong. Diagnostics are attached. mnemosyne-diagnostics-20220617-1246.zip

After attempting the update, I went back to download diagnostics and back to post 1. So definitely no idea what is going on here.

But now it still seems to get stuck here:

OK, had to do an unclean reboot and got diagnostics, but then it failed as indicated below! mnemosyne-diagnostics-20220615-1503.zip

I went to update my array and it wouldn't load the screen from the Update Assistant, showed a 520 Bad Gateway. So I thought, okay,s something flaked and I'll just reboot and hope for the best. Well I can't stop the array or reboot from the interface either. I tried poweroff from the command line. No joy. I tried downloading diagnostics and it gets to the following image and gets stuck here:

Yeah - I will change it. I believe the last time I just upped it since I didn't have time to deal with the log issue and then fixed the log issue and didn't downsize. But I guess I'll reduce it back. Thanks!

I honestly don't remember why. Maybe I was facing a similar log issue in the past and just upsized to buy time? Does it really matter though?

So, it says I have 40GB+ to scrub, but these sizes seem okay - maybe it is all good? Name Container Writable Log --------------------------------------------------------------------- binhex-jellyfin 2.98 GB 781 MB 506 kB calibre 1.79 GB 368 MB 49.0 kB calibre-web 1.24 GB 624 MB 81.2 kB binhex-sonarr 1.19 GB 62.5 MB 1.61 MB binhex-mc-creative 1.17 GB 298 MB 80.6 kB binhex-mc-peaceful 1.17 GB 298 MB 81.0 kB frigate 1.10 GB 4.39 MB 1.84 MB binhex-radarr 969 MB 155 MB 1.90 MB telegraf 493 MB 139 MB 4.63 MB postgres 419 MB 43.4 MB 7.27 kB CloudBeaver 380 MB 434 kB 17.6 kB Influxdb 341 MB 0 B 145 kB HDDTemp 339 MB 0 B 0 B mariadb 293 MB 16.5 kB 21.3 kB Grafana 286 MB 0 B 14.1 MB vaultwarden 197 MB 0 B 216 kB promtail 184 MB 0 B 7.44 MB cops 167 MB 24.7 MB 42.8 kB vernemq 160 MB 20 B 7.53 kB GrafanaLoki 60.8 MB 0 B 9.25 kB syncthing 48.0 MB 11.6 kB 34.5 kB CaddyV2 44.4 MB 0 B 1.81 MB mosquitto 11.8 MB 89 B 35.4 kB --------------------------------------------------------------------- Total size 15.0 GB 2.80 GB 34.7 MB Label: none uuid: 9757a167-f114-4ae6-adc7-322ad0955765 Total devices 1 FS bytes used 43.04GiB devid 1 size 100.00GiB used 48.07GiB path /dev/loop2 btrfs scrub status: UUID: 9757a167-f114-4ae6-adc7-322ad0955765 Scrub started: Sun Jun 12 16:34:09 2022 Status: finished Duration: 0:06:19 Total to scrub: 43.92GiB Rate: 119.16MiB/s Error summary: no errors found

So my docker image is quite large still, but diagnostics look cleaner. mnemosyne-diagnostics-20220613-0816.zip

Yep - I disabled bluetooth and it is fine. Not that I am using bluetooth, but I would love to know how to fix this error since it feels like cheating

Yeah - I will try that, but what is going on with that docker image?

Was trying to install some dockers and ran into errors. Fix Common Problems shows the following: The only new thing is I added a new drive to the array. I looked through my logs and see a ton of bluetooth errors? No idea why or what is going on there. Diagnostics attached. mnemosyne-diagnostics-20220611-2013.zip

I feel stuck on something very simple. I want to install the vernemq docker for MQTT usage. You can see here my settings - but where it creates the vernemq folder, it does not put anything into it. If I go into the docker console console, the config files are in /etc/vernemq/ so for some reason it isn't honoring the path

I had accidentally knocked loose the USB flash drive with the system on it. Very dumb of me but I will never not hate that you can’t install unraid onto a partition easily

Hi - I just tried this docker and noticed there is no mapping of the config file folder to appdata? I tried adding a /phpipam/ path mapping to /mnt/user/appdata/phpipam/www/ and /mnt/user/appdata/phpipam/cron/ respectively but it didn't work. So how are persistant storage for these dockers handled?

Not sure what is going on here. mnemosyne-diagnostics-20220604-0902.zip

Anyone have a Hugo docker to share? Would love to start static blogging with it.

Ok. I read through all 14 pages and am completely unclear about this. early posts seem to indicate logging was insecure for reverse proxies. With a reasonably long fix posted around page 4 or so. Also if I am running Bitwarden _rs now as a Docker how do I transition cleanly?

I was a dumbass and let my password manager autofill a few times before realizing it had the wrong thing saved. So now I am locked out of the WebUI. I can still SSH in, so is there a way to reset the WebUI login attempts?

OK I am a dumbass, got to format them first in unassigned devices and then add them to the pool.

Just installed 2 SSDs to move to a cache pool setup and getting this error when I spin it up. Unmountable: No pool uuid I tried switching from auto to btrfs and didn't get an option to format the drives or anything. Diagnostics attached mnemosyne-diagnostics-20210410-1902.zip

Ah cool, yep it was definitely that. I don't love that the plugin alters default butttons so I just got rid of it. Thanks everyone!

I've followed the instructions laid out here since I am replacing my SSD with 2x larger SSDs https://wiki.unraid.net/Replace_A_Cache_Drive All cache shares set to Yes. Click on Move on Main and nothing happens - page refreshes and that is it. Cache drive still has a lot of stuff on it. All the folders there are still quite full. What am I missing here?

So reading through all of this has left me more confused - iSCSI kernel support is in the 6.9.0 rcs, but I need a plugin? Which plugin? How stable is this? Will Unraid be adding a non-plugin, supported method?