a_bomb

It is certainly worth the experiment I guess. But not a long term solution to me. If that does end up being a solution. I will probably roll back to 6.9.1 and set it all back up the way I had it and see what happens.

So if they were in pair under the same controller, don't you think I would see the same type of issues with my Unraid OS flash drive?

I did reseat the cable from the UPS and the back of the server. The server motherboard only has 2 USB ports in the rear and the other has my Unraid flash drive. I guess I can just move that flash drive to a front USB port without issue? Then try the other rear USB.

I upgraded to 6.9.2 recently and started getting a TON of alert notifications around my Tripplite UPS that had no issues before. I did end up correcting my email notifications which seems to have stopped it from happening every second on the server notifications, now I just get them every 5 minutes or so. Diagnostics attached. Log is showing: pr 16 19:36:24 Server kernel: usb 2-1-port5: disabled by hub (EMI?), re-enabling... Apr 16 19:36:24 Server kernel: usb 2-1.5: USB disconnect, device number 124 Apr 16 19:36:24 Server kernel: usb 2-1.5: new low-speed USB device number 125 using ehci-pci Apr 16 19:36:24 Server kernel: hid-generic 0003:09AE:3015.00E8: hiddev96,hidraw3: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART1500RM2U ] on usb-0000:00:1d.0-1.5/input0 Apr 16 19:36:30 Server apcupsd[17859]: Communications with UPS restored. skynet-diagnostics-20210416-1932.zip

I took out my GTX 1050 and a few memory sticks and I have been up for over 2 days now.

I didn't seem to find it there. I've taken out all but 4 sticks just whittling it down until I don't see the errors anymore. Seems it crashed and rebooted again this morning (last log entries before that happened below). I went ahead and took out the 1050 just a moment ago as well. Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: HANDLING MCE MEMORY ERROR Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: CPU 8: Machine Check Event: 0 Bank 7: cc0007c000010093 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: TSC 93f4c92e09d4 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: ADDR 5ae239040 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: MISC 403e0486 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: PROCESSOR 0:306e4 TIME 1615625437 SOCKET 1 APIC 20 Mar 13 03:50:37 Skynet kernel: EDAC MC1: 31 CE memory read error on CPU_SrcID#1_Ha#0_Chan#3_DIMM#0 (channel:3 slot:0 page:0x5ae239 offset:0x40 grain:32 syndrome:0x0 - OVERFLOW area:DRAM err_code:0001:0093 socket:1 ha:0 channel_mask:8 rank:1) Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: HANDLING MCE MEMORY ERROR Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: CPU 8: Machine Check Event: 0 Bank 7: cc00078000010093 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: TSC 93f4c92e889c Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: ADDR 5b17cbd80 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: MISC 52768086 Mar 13 03:50:37 Skynet kernel: EDAC sbridge MC1: PROCESSOR 0:306e4 TIME 1615625437 SOCKET 1 APIC 20 Mar 13 03:50:37 Skynet kernel: EDAC MC1: 30 CE memory read error on CPU_SrcID#1_Ha#0_Chan#3_DIMM#0 (channel:3 slot:0 page:0x5b17cb offset:0xd80 grain:32 syndrome:0x0 - OVERFLOW area:DRAM err_code:0001:0093 socket:1 ha:0 channel_mask:8 rank:1) Connection reset by 192.168.1.63 port 22

I am in the random restart by itself group with 6.9 and 6.9.1

Well I got up to 11 hours after doing the above steps and then upgrading to 6.9.1 I was tailing the syslog and got this before it shutdown. Going by the timestamps, it rebooted more than once. This is just what was there on the terminal I had open last night. There seem to be memory errors for sure, but it also looks like it is handling them? I'm not sure how I would go about pulling the exact sticks short of assuming Channel 0 = Channel A etc. or pulling them one by one and checking the log. I'm thinking about pulling the 1050 as well Mar 12 00:49:33 Skynet kernel: EDAC MC0: 1 CE memory read error on CPU_SrcID#0_Ha#0_Chan#3_DIMM#0 (channel:3 slot:0 page:0x6a751a offset:0x340 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0093 socket:0 ha:0 channel_mask:8 rank:1) Mar 12 01:26:41 Skynet kernel: mce: [Hardware Error]: Machine check events logged Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: HANDLING MCE MEMORY ERROR Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: CPU 8: Machine Check Event: 0 Bank 7: 8c00004000010093 Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: TSC 1a5c2d76dc3d Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: ADDR 727108f40 Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: MISC 1424a5c86 Mar 12 01:26:41 Skynet kernel: EDAC sbridge MC1: PROCESSOR 0:306e4 TIME 1615530401 SOCKET 1 APIC 20 Mar 12 01:26:41 Skynet kernel: EDAC MC1: 1 CE memory read error on CPU_SrcID#1_Ha#0_Chan#1_DIMM#1 (channel:1 slot:1 page:0x727108 offset:0xf40 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0093 socket:1 ha:0 channel_mask:2 rank:5) Mar 12 01:34:45 Skynet kernel: mce: [Hardware Error]: Machine check events logged Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: HANDLING MCE MEMORY ERROR Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: CPU 8: Machine Check Event: 0 Bank 7: 8c00004000010093 Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: TSC 1b80e90da98b Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: ADDR d65da23c0 Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: MISC 425a4686 Mar 12 01:34:45 Skynet kernel: EDAC sbridge MC1: PROCESSOR 0:306e4 TIME 1615530885 SOCKET 1 APIC 20 Mar 12 01:34:45 Skynet kernel: EDAC MC1: 1 CE memory read error on CPU_SrcID#1_Ha#0_Chan#3_DIMM#0 (channel:3 slot:0 page:0xd65da2 offset:0x3c0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0093 socket:1 ha:0 channel_mask:8 rank:1) Mar 12 01:51:10 Skynet kernel: mce: [Hardware Error]: Machine check events logged Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: HANDLING MCE MEMORY ERROR Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010093 Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: TSC 1dd51b124c58 Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: ADDR 68663a340 Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: MISC 1526a5886 Mar 12 01:51:10 Skynet kernel: EDAC sbridge MC0: PROCESSOR 0:306e4 TIME 1615531870 SOCKET 0 APIC 0 Mar 12 01:51:10 Skynet kernel: EDAC MC0: 1 CE memory read error on CPU_SrcID#0_Ha#0_Chan#3_DIMM#0 (channel:3 slot:0 page:0x68663a offset:0x340 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0093 socket:0 ha:0 channel_mask:8 rank:1) Mar 12 01:59:03 Skynet kernel: mce: [Hardware Error]: Machine check events logged Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: HANDLING MCE MEMORY ERROR Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: CPU 8: Machine Check Event: 0 Bank 7: 8c00004000010093 Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: TSC 1ef3720de11e Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: ADDR 7289aeb00 Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: MISC 4214e486 Mar 12 01:59:03 Skynet kernel: EDAC sbridge MC1: PROCESSOR 0:306e4 TIME 1615532343 SOCKET 1 APIC 20 Mar 12 01:59:03 Skynet kernel: EDAC MC1: 1 CE memory read error on CPU_SrcID#1_Ha#0_Chan#0_DIMM#1 (channel:0 slot:1 page:0x7289ae offset:0xb00 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0093 socket:1 ha:0 channel_mask:1 rank:5) Mar 12 02:00:06 Skynet root: /etc/libvirt: 920.4 MiB (965103616 bytes) trimmed on /dev/loop3 Mar 12 02:00:06 Skynet root: /var/lib/docker: 15.5 GiB (16609398784 bytes) trimmed on /dev/loop2 Mar 12 02:00:06 Skynet root: /mnt/cache: 191.9 GiB (206013878272 bytes) trimmed on /dev/sdj1 Connection reset by 192.168.1.63 port 22

Thanks. I will go ahead and do that. Then if it crashes again I guess I will just roll back to 6.8.3 again.

root@Skynet:~# ls -lah /mnt/disk23/system total 0 drwxrwxrwx 3 nobody users 20 Mar 3 21:15 ./ drwxrwxrwx 8 nobody users 155 Mar 7 23:50 ../ drwxrwxrwx 2 root root 24 Mar 3 21:15 docker/ So I should go ahead and move the docker/ back to the cache drive? Or just delete it? Seems there is an appdata folder on disk 23. I could just remove that since all of that data should be on the cache drive.

I am having the same issue. I have a 1050 in my server. Though it seems to be fine in 6.8.3.

I have also been having a lot of issues with the 6.9 upgrade. Cache drive unmountable - Samsung EVO 250GB as a cache drive I ended up wiping it before seeing the solutions about stopping the array and unmounting/mounting it (lesson learned there). I seem to have got past that and re-created almost everything I needed. I had a lot of issues with it rebooting on its own as well. Usually after about 30-40 minutes and it seemed like it would just keep doing it until I reverted back to 6.8.3. I had 6.9 stable for over 7 hours today and then started to bring back my VMs (had to recreate domains share and libvirt folder) and the reboots just started up again which also caused a parity check. It just did it again, while typing this, only up for 9 minutes before a reboot this time. skynet-diagnostics-20210308-0015.zip

I am trying a similar thing with VMware Workstation Windows 10 VM > Kali Linux VM and I get I already did these steps after stopping VM's and disabling VM Manager:

Just a quick update. I created a Win10 1903 VM on Unraid and mapped the same drive and was able to scan folders without issue. Things I dont want to do now: 1.) A fresh Windows 10 install on my gaming PC 2.) Scan my network folders via a Windows 10 VM (Sighs heavily)

No kidding? This is super weird then. It was working the other month. Then stopped. The worked again a couple weeks ago and now it stopped again.

I used to be able to scan my downloads folder in Unraid with Windows Defender, but now it seems it will only let me right click and scan the individual files. If I attempt to scan the folder it just sayd 0 threats found and 0 files scanned. Anyone else run into this issue?

Thanks @jonathanm! I was able to get everything situated. The zipped Flash backup did include the key, but it didn't work until I replaced it with the one i pulled off the drive when it wasn't working.

Cool. So I just create the drive again. Then paste the Pro.key file inside the config folder that was in the backup I just copied an hour ago?

If I use the same flash drive, and go through the creation tool again and then import my backup I won't be charged another license fee right? I just used up the usb transfer to change to this smaller drive so the larger one wouldn't accidentally get broken off on the back of the computer.

I did put it in earlier and let it go through repair disk. I didnt take a backup though. Put the drive back and same thing. Just ran the chkdsk on the flash drive and Windows found no problems. Made the backup. Put drive back in server and no change.

After installing a video card and trying to get it to work on a VM the server shutdown and then wouldn't book back to the GUI. I ran the diagnostics and have attached the zip file to the post. Any help is appreciated. It looks like I have nothing in the config files, but I am not sure if that is normal for the diagnostics.