So this is a weird one. Looked around the forum and couldn't find anyone who's also run into this issue. Hopefully one of you can help.
Running 5.12a which, since adding an IBM M1015 (flashed to IT mode) started dropping a drive from the array whenever it goes to sleep and is woken up. First time it happened, I was able to remove the drive from the array, re-add it and rebuild successfully. Stopped putting the server to sleep after that and just powered it off and on as needed. Server's been rock solid for the last 6 months doing it that way.
Unfortunately the other night my better half put the server to sleep accidentally and it dropped the same drive again, a 1.5tb Samsung F2. This time the array thinks the missing drive is supposed to be 2tb and won't rebuild, because the drive is not large enough.
Here's my syslog. Disk 7 is the culprit.
www.pygmalionarts.com/unraidsyslog.txt
This is what the array looked like right when it woke up from sleep. Said everything was online, but noticed several files missing from folders on the network which probably explains the errors.
Array offline. Getting drive too small message when trying to add Disk 7 back to the array.
Array online with Disk 7 disabled. Array thinks it's supposed to be 2TB.
Ignore the drive change from sdl to sdf for Disk 7. I wanted to move the drive off the IBM M1015 to the onboard SATA to see if that made any difference. Any ideas how to get unRaid to rebuild or am I going to have to buy a 2TB+ drive? Thanks.