Arbadacarba

I'm seeing the same thing... I also can't add plugins to grafana... They seem to work with CLI but then they aren't there.. And if I try to unzip the files into the plugins folder I get an access error. From the Github: Bits and bobs The read-only paths are required for Telegraf to report on host devices. Is this what I'm running into? Arbadacarba

So, after struggling with this for over a week, I told the system to check for updates and discovered there was one... Now it's working.. Sheesh... I could have found that earlier.

Not having seen mass complaints on here I have to believe something has gone wrong with my install... But just in case I missed something. For the past couple of weeks thing have not been working... If I try to use Switzerland the UI doesn't load and if I use Denmark, it loads but nothing downloads...

RE: Transmission_VPN I've looked through this thread, and can't seem to find an answer: Is there a way to use transmission remote with the docker? Arbadacarba

OK, so it's not something obvious. Fair enough and thanks. I'll use Ripper to automate the ISO's and then strip them out. Still way easier than doing it by hand. Arbadacarba

Any hints on the variables I'm looking for? I feel like I'm missing something obvious with not being able to find the CD itself... The equivalent of D:\ in windows. And am I right that Ripper creates a folder with the name of the Disk to put the ISO into? I'm just unfamiliar with the formatting and use of the variables. Thanks again for the help with the Timestamps... That's exactly what I had in mind... (And I think gives me a hint about my second question here too. Arbadacarba

I'm trying to avoid ISO files... Making the content accessible from programs that can't access ISO files and more easily searched. I just want a folder with the name of the CD and the CD's contents (with subfolders) inside.

WRT Ripper: I've had one problem show up a few times now. I've used ripper to pull flac files off some indi cds that have no listings on the various servers. (when I say indi I mean very indi... locally produced church singers for my inlaws ) but if I'm not paying attention the second one overwrites the first... How difficult would it be to either add a check for unknown artists? Or even just through a time date stamp on every album folder? Thanks Arbadacarba

WRT Ripper: Could anyone point me in the right direction? I'm trying to dispose of a bunch of backup CD's by copying their contents to a share on my Unraid server... Ideally I would just causally swap them into the drive and have Ripper dump them into its output folder. I know this is possible by creating a DATArip.sh file. I've gone ahead and done that (very badly I suspect, but it doesn't seem to work. (probably because I have no real idea what I'm doing) #!/bin/bash # Source /dev/sr0 # rsync is NOT PRESENT in the docker # cd "$STORAGE_DATA"/"$DISKLABEL" # output path is /out/Ripper/DATA/"$DISKLABEL" cp -r '/dev/sr0/*' '/out/Ripper/DATA/"$DISKLABEL"' echo "$(date "+%d.%m.%Y %T") : Done! Ejecting Disk" eject $DRIVE >> $LOGFILE 2>&1 # permissions chown -R nobody:users "$STORAGE_DATA" && chmod -R g+rw "$STORAGE_DATA" done I can't seem to figure out how to test it... I assume the variables from the ripper.sh file are passed through when this is run. But trying to test it from the docker's console doesn't seem to do anything... (of course the docker is doing it's own thing as soon as I put a disk in.) Any help or hint would be greatly appreciated. I think my problems are as follows: What is the path to the contents of the Data CD? Has Ripper already created a folder using the CD Label when it runs the DATArip.sh? What is the path to the folder that ripper creates with the name of the CD as the folder name? As in the path with the variable? Arbadacarba

I've been wondering this too... I'm a believer in not over complicating things (this is an intellectual stance, not one I can hold to emotionally all the time) and when I found my gaming VM boots and works without the vbios I stopped there. Am I missing out on something? Is there a reason to use the vbios if the system works?

I'm seeing the same thing. It's had one CPU core pegged for quite a while

I had the old version reporting on my UPS - but when I replaced it with the new version I can't get it to work. Was Sudo removed? Thanks

Hopefully you won't object to me dropping mine here... It's a beQuiet Dark Base Nine Hundred

Running into an issue with the "Other" items: I have enabled it in the settings and tried a couple of triggers ("Backup") but nothing seems to work. What I want to do is log my backup actions and have it highlight them... Maybe even have it trigger a red bar with a backup failure. My Log line looks like this: logger Backup ${sequential}/${NumberOfShares} ${ShareNames[counter]} Succeeded -t$PROG_NAME Oct 24 23:18:53 Jupiter Seagate_Backup_Plus_Drive-1: Backup 7/14 EBooks Succeded logger Backup ${sequential}/${NumberOfShares} ${ShareNames[counter]} FAILED -t$PROG_NAME No Example But there is no color on the log. Thanks

On the one hand this is not an important request, but on the other I have to at least mention it. Was there a reason the order an placement of information doesn't line up with the elements from the other 3 device types? I recognize there are more items you need to show for unassigned devices, but it seems that it would look slick (Honestly I think it already works pretty slick) if the ones that matched... matched up as it were. Thanks for the great plugin.

As for a general solution, I use Krusader (Granted it feels a little antiquated) and have a "Custom Tab" configured to open directly to it. I wish the Custom tab was a little more flexible, resizing and making better use of the screen itself. But that's more of a problem with the implementation of "Custom Tab" than Krusader.

Am I missing something? I routinely close my laptop while running large moves with Krusader and take my laptop to work... Reboot it a time or two and then reopen the VNC window for Krusader and see everything either finished or progressing nicely. Why do you think you need to leave it open?

I'll try to show what I did a little more clearly... I was sitting in a coffe shop passing time when I sent that earlier. Goals: I have a 500GB NVMe drive that houses two partitions: My previous Windows 10 install that powered my server before I discovered Unraid, and a second partition that I wanted to use for things that I want to run as fast as possible (ie: Docker, components and VMs). I made my Windows install usable as both a bare metal installation and inside the VM using SpaceInvaders instructions - Working Then I copied the domain, system, and appdata folders to the second partition of the NVMe drive and used the Setting Screens for VMS and Docker to assign their new locations on the NVMe drive (Second Partition is actually named NVMe) then deleted the old ones by removing them from the share folder and from the media folder as seen through krusader. Then I adjusted Krusader as below: You can see the entries for NVMe and Unassigned Devices. In Krusader I get: and UNASSIGNED works as I would expect as well. Here's where it got weird and I guess I have an idea of why: Because of the way I created entries for them in Krusader, it created a folder or "something" in the /mnt/user folder. In "User Shares" in the web UI I have: I did not create those shares other than by using Krusader. However, when I look in them on this screen using the view button they are empty... and in Network on my Windows 10 machines they appear empty as well... I wonder if there is a way to create a symlink or something instead of a folder in that /mnt/user folder that would be more useful. Thanks for reading... I really haven't a clue what I'm doing. I have 25+ years with windows and about 2 months of linux.

Thanks. Hmm... I wonder... I tinkered around and my Drives mapped in Unassigned Devices showed up in my Shares screen... I wonder if they would work. I moved my System, Domain, and Appdata folders onto the second partition of my NVMe drive and while playing with mappings in Krusader noticed that UNASSIGNED and NVMe (The names of the shared folders) appeared in my Shares... I don't remmember the UNASSIGNED one being there before. I don't actually use those shares from other computers so would not having my Windows accounts access them even matter? OK, More playing after my little guy goes to bed tonight.

Just found those instructions myself and jumped over here hoping to find that the @ symbol have been fixed or was about to be fixed... Guess not. Any hint on where I would look to find the reason the @ symbol is verboten?

Could it be that the current version of windows refuses to connect to anoymous shares? I had to enable insecure guest access in Group Policy settings: Computer configuration\administrative templates\network\Lanman Workstation "Enable insecure guest logons" https://support.microsoft.com/en-ca/help/4046019/guest-access-in-smb2-disabled-by-default-in-windows-10-and-windows-ser I did this and was happy with the result.

Just a quick note that there is anther solution to this problem without enabling SMB1. Microsoft has replaced SMB with "Function Discovery" (in a manner of speaking) and there is a daemon / script that enables that for Linux. I have "Instructions" in the thread here: forums.unraid.net/topic/82765-solved-windows-network-working-with-no-smb1/ Kevin

I'm a new user who is still on his 30 day trial... So far the flexibility of Unraid has been perfect for my needs as both a home media server, and as a learning tool for Linux and even ESXi