Arbadacarba

Has anyone found a way to get the noVNC window to open a little cleaner? I was looking for a way to JUST get the desktop window and almost got there: %ProgramFiles(x86)%\Microsoft\Edge\Application\msedge.exe --headless="http://10.40.70.11/plugins/dynamix.vm.manager/vnc.html?v=1746576860&resize=scale&autoconnect=true&host=10.40.70.11&port=&path=/wsproxy/5701/" gives me: Which looks a lot better than with the address bar across the top. I know it's a little thing. Arbadacarba

I use a couple of VM's to do things like clone drives and repair systems... For various reasons the VM's need to shut down after each job so that I can swap out NVME drives from the reader to start the next one. It occurs to me that if the VM is shut down from within the status of the VM on the Dashboard or the VM page does not reflect the current state until you hit refresh on the browser. Is there a reason it doesn't keep up to the status? Thanks

Installed and working.. Very slick so far. My need has abated since I moved from flakey point-to-point to buried fiber but still. Nice work.

Trying to get this set up for my kid and his friends... How do I secure it properly? I have the port forwarded through my firewall... I use tailscale for everything else but don't want to have to do that for the other kids... I tried to get the whitelist working and get a reasonable response when I add a user but Whitelist on responds with:

Nuovoton drivers? Where does one get the Nuovoton Drivers? What MC are you running? Thanks

Would that mean I can't use the integrated gpu for dockers and such?

I'm trying to record some examples of the boot process to try and diagnose some odd messages. Trouble is my screen jumps to a VERY high resolution and I can barely read it. It starts out fine: But then switches to: I don't even have the words to search for an answer to this. Thanks

I have a 4TB 990 Pro on my bench right now that did something VERY similar... It ran in a laptop for a few weeks to a month and the vanished... I rebuilt the machine, plugged it into a nvme-USB adapter to see if I could pull data from it and it would work for a while and then vanish again... Unplug and replug would get it working for a while and then gone again. Pulled all my data off and am starting the RMA process... So far Samsung RMA feels like it's a guy at a desk with no procedures just winging it. https://nascompares.com/news/samsung-990-pro-ssd-failures-updated-official-response-replacements-more/

Tempting...if only there was a one with just the temp sensors

Pretty sure they are caused by the FanCtrl Plus plugin... I will post again when I reboot

Are you talking about sensors you have added to your server? As in external devices? Can you explain? The best I've been able to come up with is a Aqara Temp sensor in the case

Have you got any plugins running?

Is there a way to figure out what?

My Shares are/were showing "Some or all files unprotected" on all the shares (I fixes the Anime share)... Some are almost certainly correct, but I don't understand why some of them are listed there... or why the casue hasn't been automatically corrected... Upon investigation, I find empty folders on my cache drive corresponding to each of the shares... I deleted the Anime folder from the Cache drive and the icon changed... I assumed these folders are created automatically when the system correctly places a file on the Cache drive when it is moved or saved... My question is: Shouldn't mover be clearing these folders when it has moved the files off of the Cache drive? jupiter-diagnostics-20251105-1013.zip

Long story short... I just completely rebuilt my server, with new Mainboard and Replaced some drives... I've been moving Data around to organize it in my preferred method with each drive primarily used by one or more shares with most shares not being split among drives. It's been going slow but working. Last night while I'm working, I can hear the drives grumbling away... I'm not doing anything at the moment, but something is happening... as far as I can tell Mover is not doing anything, and the parity check is not running... This morning I have a notice that I have notifications about the current usage levels of Drive one: What is going on? None of the Shares on Disk one are allowed to go anywhere else... and I don't see any share folders on the other disks... I need to take a look at the percentages for the shares... 30% of a 26TB drive is a bit much to worry about... jupiter-diagnostics-20251105-1013.zip Honestly, I expect it's mover doing something, but where do I look to see what it's doing at this moment?

I posted about this earlier... In my case I was rebuilding the server and this was on a new array with a new Parity Drive.

I get the same thing and run the same Dynamix plugin

My fans are being controlled by the FanCtrlPlus plugin and I'm pretty happy with that... I wish I could shorten the response time to spool them up faster but during the Prime 95 runs my case internal temperature is only going up by about a degree and a half. The fans are almost inaudible at idle and ROARING at full speed. As they should be. I tried bringing the offset up slowly and get a pretty reliable crash on worker 19, so I'll play with that a little later. I guess I could play with finding the right number for the Efficiency cores and then playing with just the Performance core offsets. In the end it didn't really change the idle temperature at tall... It sits at 44 degrees which is only 5 degrees above my mainboard temps... Does that make sense?

I ended up running the linux prime95 directly in unraid... turning array autostart off... So far I've offset the power by 0.05 volts and it looks like it dropped the temps by 5 degrees. 0.075 results in a crash on a couple of the e-cores as soon as I started. I'm going to fine tune a bit to see if I can get the offset a little higher.

I bought the wrong CPU for my system... and it runs a little hotter than I'd like. The Fans run a little fast and louder than I would like. I'm considering Undervolting my CPU and would like to test the system without the risk of an unclean shutdown messing with my array. I have found the Atomic Burn test in CoreFreq, but is there any other protocol I should follow. My intent is to set the Voltage offset up and raise it until I start to have trouble and then back off a bit. My system isn't running all that hot and so far it seems to be running fairly well. but I do dislike the extra noise and am incapable of leaving well enough alone. Thanks

In this particular case the event was the construction of a new array... So still not a warning?

I'm running 7.2.0 rc-1 and have just teplaced a 10TB drive with a 26TB in my array... The 10TB was Cleared before I started and I have a backup of my array so I'm not worried about data loss "much"... SO I pulled the drive, installed the new one and started the rebuild of the parity disk... I ran pretty good the first day getting about 25% of it done in something like 28 hours... OK... But then I wanted to work on a project and my SSD drives are full... So I started moving my downloads folder from the pool to the array... 3 days later I'm at 39% of the parity rebuild and I have some weird things going on with my dta move... The Status text at the bottom of the window is doing something weird... it climbs to ~99% complete on the data move with a few minutes left, and then drops down to ~80% with hours to go... It did this mutliple times... Eventually I gave up and tried to cancel the data move... I clicked the box to open the dialog and hit cancel... The text cleared. Then I looked again and it is back... I've tried twice. I understand I should have been patient and I am to blame for the slow performance of my system at the moment, but is the refusal to cancel and the weird process corrections by design? Thanks jupiter-diagnostics-20251017-1153.zip

Check in the share what your "Minimum free space:" is set to... I ran into a problem where it was a very large number for some reason. My plex database was wrecked when I changed it to a reasonable number but everything else came back.