Arbadacarba

My server is set up for multiple pirposes, but one of them is as my primary gaming machine... I have never noticed a problem with "Micro Stuttering" but thought I should be pinning some of the CPU cores just to be sure. My intention is to pin 6 Cores and threads and then keep an eye on how the remaining 4 cores keep up with the other tasks I use the server for. I have pinned them to the Gaming VM and set everything else up to use the rest: I've noticed I get a little bit of action on HT 15 even when the VM is shut down: Have I done this wrong? How can I see what specifically is using that cpu? I occasionally get a flutter on one of the other CPU's but HT 15 is consistently in use. ------------------------------------------------------------------- I was going to include my diagnostics, but I seem to have another problem... While creating the Diagnostics it appears to be listing every file on my server - not litterally but it's been going for 20 minutes with: sed -i 's/\/mnt\/systems\/Files\/- Torrents\/FolderName\/11972.jpg/\/\/..g\/.../g' '/jupiter-diagnostics-20231209-0925/logs/syslog.1.txt' 2>/dev/null

Is that a bandaid until the devs fix it or is that the permanent fix? I have the same issue and mine too is missing the "upload" subdomain

Hmm, so what kind of read write speeds are you getting on the array? If you are not running a parity you should be getting close to the same speed you were getting in server 2019. Can you create a ram drive and do some speed test directly in Unraid: and see what kind of performance you are getting from the drives.

HOLY COW - How is that not in the main Dockers page for the rest of them?

125 and 250 seem fine but 500 or 1000 borks my frame rate... How very odd...

Fascinating I've been trying to figure this out myself... I tried to play Tiny Tina yesterday and the results were horrible... The Test Demo was fine, but trying to play resulted in terrible stutters... Today I tried Halo CE... 1920x1080 and the stutters were horrible... But if I use my MX Anywhere 3 or my K600 (Trackpad) it works flawlessly... My G502 is unusable... I'm sure I've used the G502 before (I don't get a lot of time to play - So it's been a couple of months)... Has something changed?

Have you installed the Guest agent? OR switching AWAY from Spice?

I've been running on a VM for 3 years now and have had ZERO problems... Would I implement it in a VM for a client? No, I make them buy Netgate appliances... Would I use it in my own business? Yup. My first thought is to take a GOOD LOOK at the System Devices, and then downgrade to a known good version of Unraid Take another look at the system devices and see if there is a difference when it comes to the Network cards... Maybe a new driver conflicting with the VM? Maybe try swapping out any gear you can... Simplify the config and see if the problem goes away? If you can't change the hardware maybe shut the pihole down for a little while. As for MrGrey... have you never tried something new? Pushed a boundary on what you thought was possible and needed a little support? I learn by breaking things every day and there are people on here that know so much about this stuff... I've had problems that people on this board had answers for that I barely recognized the words they used and I've been in this industry (successfully) for 30 years.

I'm having the same issue with it disappearing at reboot... I too have no internet until my server is up and running, and my pfsense vm is started

I'm going to add, it's not just VM's... I've spent that last ten years eradicating Spinning Rust from every machine I work with. (Over 400 systems that I'm responsible for. I have over 100 machines that are in excess of 8 years old, but they run just fine in the medical environments that I work with so long as they have an SSD.) You find the VM laggy, but I wonder if you would feel the same way if you loaded the OS natively on the bare metal you are working with? I have over 100TB of storage on my machine and 80TB of that is rust... But none of my VM's are on anything other than SSDs

I've run things like that in the Go file: #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & # Disable power button short press cp boot/custom/scripts/acpi_handler.sh /etc/acpi # Enable Intel Quick Sync hardware acceleration for plex modprobe i915 chmod -R 777 /dev/dri # Copy the VM icons for custom VM cp boot/custom/icons/* /usr/local/emhttp/plugins/dynamix.vm.manager/templates/images # Disable ACPI handler that locks up one core (deprecated?) # echo "disable" > /sys/firmware/acpi/interrupts/gpe6F # Enable FANCONTROL and copy conf file over to live system # cp boot/custom/scripts/fancontrol /etc # fancontrol & # echo Enter # Customise BASH coloring cp boot/custom/scripts/.bashrc /root # Install Sensor Drivers modprobe coretemp modprobe nct6775 /usr/bin/sensors -s # modprobe lm75 - Old Mainboard go

How do we use and submit the Debug mode... a couple of issues: How do we reorder the items in Dockers and VM's? I thought you just dragged them but can't seem to get that to work. I have a few Dockers that have been moved to the Folder but they still appear outside of the folder. The list of Dockers to include is spaced very strangely. (No wait... It's just centered instead of left justified) You have no idea how excited I am to have this working again. (I've come to the conclusion that I need to get out more)

I've seen this where I leave edge on the Dashboard while doing other things for hours at a time. I have a Edge Window open with tabs for my internal tools amd it remains open for days at a time. I often click on it and find notifications that act odd unless I hit refresh.

So I was able to build a qcow2 VHD (.img) with ventoy and Medicat on it. (Booted a Debian VM with a new 64G VHD attached to it, and ran the Medicat Linux installer) In a dedicated VM it boots and could in theory condense all my various Utility VMs down to 1, that if I keep the same ISO's on my EDC thumbdrive I could have the same tool collection with me when I go on site. But do I really have to boot another VM with this attached to access it?

So I've had a further idea... I have been using these various disk recovery tools in my home lab, to fix and duplicate drives... And occasionally I have to take the tools with me to help friends and family. I have recently tried using Medicat, and have been really happy with it. Having the tools it includes and adding ISO's of my own purchased tools. But I've started to try to find a way to use Medicat in my Unraid VMs. I've got a VM that boots from the Medicat Thumb Drive and that works, but again why can't I virtualize the USB drive? I've downloaded the Linux creation tool for Medicat, and it seems like I should be able to mount a VDisk in the terminal and run the Medicat installer into that. It would be so usefull to be able to access that Disk from Outside.

Did this answer the question? Lets see what you came up with?

I don't mean to hijack the thread, but I thought if I made the question a little more comprehensive we might get a response: I'm running: 1 7 drive Array with single parity disk (Containing stored media - Mixed Disk Sizes) [xfs] 1 2TB NVMe Cache drive [btrfs] 1 System pool with 2 4tb SSD striped (with Dockers, VM, sand system folder) [btrfs] Is there any benefit to my switching these to ZFS? My system pool is where I wanted best performance, and would have used the NVME drive, but I got Terrible performance from the SSD's when mirrored, and a 8TB cache seemed wasteful. I'm not worried about the HOW TO, as I'm sure I can figure that out... But I just don't understand why everyone is so excited about ZFS

I figured mine out... I'm using Fancy Zones to split my 32" monitor into four zones... All the same width (Half the screen (4K so 1920 each)) but varying heights. I generally have my homelab window in the top left and have dropped to 2 columns in 6.12. I played with it and set the border (Space around zones) to -4 (Had it at -3 before) and viola, 3 columns. pfSense has the option of defining the number of columns for the dashboard. That would be helpful here. Now if only the Docker and VM folders app worked.

Same question, and while I understand they made the columns all equal in order to make them interchangeable, I'm hoping there is a way to edit it, or that Limetech would consider including more control.

So Yaml files edit best in Notepad++ and I have my appdata folder accessible in a windows share. Create the additional Paths: My appdata folder is on a SSD pool Not Happy with this yet I should probably switch these to read only. Did you create the icons folder? .../appdata/homepage/public/icons/ and then: Run the Container While the container is running, open the WebUI. Opening the page will generate the configuration files. You may need to set the permissions of the folders to be able to edit the files. Click on the Homepage icon. Click on Console. Enter chmod -R u-x,go-rwx,go+u,ugo+X /app/config chmod -R u-x,go-rwx,go+u,ugo+X /app/public/icons chown -R nobody:users /app/config chown -R nobody:users /app/public/icons The three sections I've modified are: widgets.yaml widgets.yaml services (de keyed).yaml bookmarks(dekeyed).yaml For the pfsense integration I used this pkg: https://github.com/jaredhendrickson13/pfsense-api which was... fun... I ended up copying it to my server and installing it locally. Final Product (reworked a bit as I wrote this): Notes: Most Fields lines can be left blank and they will show all 4... if you only want some, or you want different ones you can pick and chose. No backslash at the end of the url I get my icons by draging them from the dashboard to the folder My PiHole is not functional (at the moment)

Did you make any progress with this? I have it up and running, with the final piece of the puzzle for me getting it to run on its own IP without the need for a port number. (running on [port 80) I really like the program but the name makes it impossible to find information about it... We all made fun of the goofy spellings web 2.0 used but it sure was easier to reseach imgr than if they had called it imager... homepage? Sheesh

Anyone had any luck getting Homepage to use a different port than 3000? I'm trying to get it to use 443 or 80 on a different IP.

Ya, That's my general Technique as well: The Bare Drive VM's Boot the random Hard Drives I get presented with to pull files from and find things on. I just think it would be usefull to skip a step and get right into the drive itself. It seems obvious that Unassigned Devices should be able to mount VM Disks

Is there any way to mount a VM drive? Like a qcow2 volume? Either to mount it in Unassigned Devices and copy the files, or access the whole drive and modify it using a partition manager. My use case it that I have cloned a broken drive to a qcow volume on my cache drive and it was successfully cloned, But now I need to do some partition management tasks on the drive and then I plan to clone it back to hardware... I can't (Easily) clone it back first because it is a 2 TB disk that refuses to fit on a 2TB SSD and in fact only contains under 200GB of data so if I could access the drive I could shrink the partition and fit it on a Smaller SSD. I do a lot of drive conversions and use a dual drive slot in my Unraid server tower to let me avoid working on the patient machines directly.

OpenSpeedTest installed on the Unraid Server at 10.40.70.11:3000 Connection from Laptop: Wifi at my Desk: (My AP's are NOT nearby) SSID: Paradise Protocol: Wi-Fi 6 (802.11ax) Security type: WPA2-Personal Network band: 2.4 GHz Network channel: 11 Link speed (Receive/Transmit): 86/155 (Mbps) IPv4 address: 10.40.70.192 IPv4 DNS servers: 10.40.70.1 Manufacturer: Intel Corporation Description: Intel(R) Wi-Fi 6 AX200 160MHz Driver version: 22.200.0.6 Physical address (MAC): 78-2B-46-C7-0D-21 Cabled at my Desk: Connection from Chrome Docker: What the Hell? Connection from VM (Goat): Connection from Gaming VM: