Armed Ferret

I was getting the exact same error. All 12 cores maxing out when using SabnZBD I upgraded my Bios and this fixed it for me. My mobo is Asus Rog Strix B450-F Gaming.

Hello guys. I have Lidarr docker running on my unraid server. Lidarrs download clients are SabNZDB and utorrent. SabNZDB is also a docker on unraid but uTorrent runs on a remote PC. I am able to connect utorrent with Lidarr and send my downloads there but the files are not being transferered back to my storage location on unraid. On Lidarr I am getting an error "Remote download client uTorrent Remote places downloads in C:\Users\testuser\Documents\Media but this is not a valid ubuntu path. Review your remote path mappings and download client settings." I found this guide that kind of explains how to map remote drives and local drives but I cant see mto follow it. https://old.reddit.com/r/usenet/wiki/docker What I want is when the files are done downloading the files are transferred back to my unraid server to my media folder. These are my mappings: Lidarr Docker config utorrent on remote PC settings Any help would be appreciated.

the 4 hdds have one cable. The Mobo has its own cable. Video card has its own cable. And the new SDD I am adding has its own cable as well. Something I forgot to mention. This only happens when I plug both the power plug and the Sata cable to the new drive. If I just have the power cable plugged in and no sata, the PC boots up fine.

I am not sure I understand the question. The Power supply gives power to the mobo, the heat sink, graphics card, and hdds, besides the nvme drive thats plugged directly into the mobo. I hope this doesnt sound like I'm being snarky. I may just not understand what you are asking.

This is my setup ----------------------------- Asus Rog Strix B450 F Gaming MB Ryzen 5 2600X Sapphire Radeon RX Vega 56 8GB 2048 Bit Graphics card 32GB (2x16) Corsar 3200MHZ RAM 4 4TB WD Red Drives (1 running as parity) 1 Crucial 500GB NVME drive 1 8Port 6GB Sata PCIE card (My 4 4TB drives are plugged into this) Linked for reference https://www.amazon.com/gp/product/B07MSCX5QY/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Corsair CX Series 650 Watt Power supply Now when I try to add another SSD the CPU fans spins for a second and then stops. Then I need to flip the power switch or unplug and plug back in to get it working. This is the second SSD I tried to add. Things to note: I am plugging this one directly into the Motherboad and not using the SATA card. I used all of the plugs on one cable and do not have a second one. I am trying sata 1 on the motherboard but have tried other slots. I also tried a different sata cable but still same result. The SSD is a 1tb Samsung 860 EVO. Appreciate the advice. Thanks in advance

I want to store my Plex data...IE thumbnails, metadata, etc on a dedicated SSD drive to speed up plex. I found some videos on how to do this but in my Plex docker (I use the official Plex Docker from Plex) and I do not see that option. I am on the General tab under my server and click on advanced settings and still don't see it. Is this option now gone?

Do you have or are you using a 3rd party VP’? The vpn site you are using might not support port forwarding. That’s what the logs tell me. 1. You chose pita as your vpn and you are using a site that doesn’t support port forwarding.

Have you watched space invaders video on delugevpn? It doesn’t seem like it since your container mappings aren’t correct.

Did you download the vpn config fie from your vpn site and place it in that location?

I currently have a Ryzen 5 1600 CPU with an ASRock AB3540M PRO4 MicroATX and 16GB of Ram My server keeps becoming unresponsive and requiring me to hard reboot. I think its because the CPU is maxing out. I am running plex SABNZDB, Sonarr and Radarr on it. So im thinking of getting 2 Intel Xeon E5-2650 v3 Ten-Core Haswell Processor 2.3GHz CPUs but need some advice on what dual CPU MB would be good to match with it that wont break the bank. Appreciate the help

Ugh I feel stupid. I just read it wrong. Multitasking and not paying attention. Disregard.

I added a new disk to my array but it doesnt look like the Web GUI is showing the correct size. Anyone know how I can fix this?

I updated the BIOS to the latest version. (I was 3 versions behind). However, still no C-states. Blasted Ryzen cpu.

I managed to get the logs off of the flash drive and took a look through them. I do see plugins keep trying to install but then that could be just normal. Im not sure when the server became unresponsive though but when I tried to access it, thats when I noticed. If you can't tell whats wrong from these logs I think i'm going to try and get an intel cpu and see if that helps. syslog.txt

If it does it again, how do I get the logs off the flash drive? Just plug it into my PC? I do not seem to have a C-state option under Advanced > CPU Configuration. I have an ASRock and all I have is - Cool n Quiet "Enabled" AMD fTPM switch "Disabled" SVM Mode "Enabled"

At least twice a day my unraid server becomes unresponsive. When this happens I cannot remote into it anymore, nor can I use the actual command line on the physical box. I need to press the power button to power off/back on to get it to recover. Any ideas? Unraid Version 6.7.2 M/B: ASRock AB350M Pro4 Version - s/n: BIOS: American Megatrends Inc. Version P4.70. Dated: 02/09/2018 CPU: AMD Ryzen 5 1600 Six-Core @ 3200 MHz HVM: Enabled IOMMU: Enabled Cache: 576 KiB, 3072 KiB, 16384 KiB Memory: 8 GiB DDR4 (max. installable capacity 256 GiB) Network: eth0: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 4.19.56-Unraid x86_64 OpenSSL: 1.1.1c I have two drives in my Array. One as a parity and one as a disk Both WD Red NAS 4TB drives The format is xfs but the parity drive does not show a file system. Not sure if this is normal. Cache Drive is a NVME 500GB drive. Format btrfs I pulled the diagnostics logs from Tools>diagnostics but it looks like the logs are just from after my restart. Not sure why a system would overwrite logs after a reboot. Any help is always much appreciated. Ive attached my syslog file but not sure it would be helpful. syslog.txt

Is there some sort of tutorial or guide for what the different options do in the Web GUI? This qBittorrent version Options is quite a bit different than the client I have running on my PC. Ultimately what I want to do is this, if possible: - place the torrents still downloading in the incomplete folder - when done, move them to the completed folder - rename them if possible as well - when the download is complete, dont seed -take off the bandwidth limitation for my downloads Any help would be great. Thanks

I added the certificate from my VPN site but I still get connection refused. Any ideas?

I am trying to create a network share from my PC to unraid. I followed spaceinvaders video and I can see the share. I just cant browse to it. With my firewall on I get the Network Drive is unavailable error. I turned off my windows defender firewall and now it just sits at "Attempting to Connect" I have SMB turned on for my PC but I cannot access the raid share. Here is the permissions I put in SMB on raid [rootshare] path = /mnt/user comment = browseable = yes valid users = username write list = username vfs objects =

So it seems one of my memory sticks was bad. After testing one at a time I was able to find the bad one. The parity is now set up but I am now seeing a warning next to my parity disk. When I hover over it I see "Parity is invalid" I have two Western DIgital Red Drives 4TBs each. One set as parity and one set as disk. How do find out why?

No. But I will do it now. So when I run this and if there are failing addresses then that means the memory is bad and I need to replace it?

I am trying to set up an Unraid server and it fails during the initial parity check . The screen shows some lines from the error log but I cannot SSH into the server to download it, I cannot access the server through the Web Page, I cannot even ping the server. On the unraid CLI the cursor is just flashing and right above it I see "end trace". So Im not even sure where to start here. Mind you this is my first unraid system and Im not really a linux guy so the more detailed the better or I will probably ask follow up questions. I appreciate any help I can get. Here are my specs Unraid Version: 6.7.2 (Also tried 6. 7 .1 and same issue) HDDs in Aray: 2 4 TB Western Digital Red NAS HDDs One added as parity Cache Drive: Crucial P1 500GB 3D NAND NVMe PCIe M.2 SSD MOBO: ASRock AB350M PRO4 MicroATX Motherboard CPU: AMD RYZEN 5 1600 6-Core 3.2 GHz (3.6 GHz Turbo) Socket AM4 65W Graphics Card: MSI Gaming GeForce GT 710 2GB GDRR3 RAM: G.SKILL Aegis 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 Thanks again