Jump to content


  • Content Count

  • Joined

  • Last visited

Posts posted by TarrifMan

  1. I finally rebooted the system to update to 6.8.2 and suddenly I lost internet to the internet. I downgraded back to 6.8.0 and I still have no internet.

    I can ping local devices but cannot ping google.com or  Server is connected to a unifi switch which is connected to a unifi USG. All my other devices have internet access (Wired and wireless).   I've noticed a "default" route is missing. 

    PING ( 56(84) bytes of data.
    64 bytes from icmp_seq=1 ttl=64 time=0.019 ms
    64 bytes from icmp_seq=2 ttl=64 time=0.039 ms
    64 bytes from icmp_seq=3 ttl=64 time=0.041 ms
    64 bytes from icmp_seq=4 ttl=64 time=0.041 ms
    64 bytes from icmp_seq=5 ttl=64 time=0.032 ms
    64 bytes from icmp_seq=6 ttl=64 time=0.040 ms
    64 bytes from icmp_seq=7 ttl=64 time=0.039 ms
    64 bytes from icmp_seq=8 ttl=64 time=0.041 ms
    64 bytes from icmp_seq=9 ttl=64 time=0.039 ms
    64 bytes from icmp_seq=10 ttl=64 time=0.032 ms
    --- ping statistics ---
    10 packets transmitted, 10 received, 0% packet loss, time 9189ms
    rtt min/avg/max/mdev = 0.019/0.036/0.041/0.006 ms
    root@Titan:~# ping google.com -c5
    ping: google.com: Name or service not known
    root@Titan:~# ping -c5
    ping: connect: Network is unreachable

    Network Settings:




    What I tried so far:

    disable/re-enable bonding (this resulted in me losing access to the server and had to disconnect power to get it to reboot)

    disable/re-enable bridging

    changing DNS (this resulted in me losing access to the server and had to disconnect power to get it to reboot)

    rebooting the switch/ USG



    I will send logs via pm


  2. 1 minute ago, BRiT said:

    Reboot or power cycle.

    I pressed stop array 15 mins ago and it's still not done... " Array Stopping•Retry unmounting disk share(s)."

    Me deleting /dev/ files might have broke unassigned devices too....

    "Fatal error: Uncaught UnexpectedValueException: RecursiveDirectoryIterator::__construct(/dev/disk/by-id/): failed to open dir: No such file or directory in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php:122 Stack trace: #0 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(122): RecursiveDirectoryIterator->__construct('/dev/disk/by-id...', 4096) #1 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(1232): listDir('/dev/disk/by-id...') #2 /usr/local/emhttp/plugins/unassigned.devices/include/lib.php(1294): get_unasigned_disks() #3 /usr/local/emhttp/plugins/unassigned.devices/UnassignedDevices.php(269): get_all_disks_info() #4 {main} thrown in /usr/local/emhttp/plugins/unassigned.devices/include/lib.php on line 122"


    Should I just turn the power off?

  3. I was trying to delete some files via the console. Types in /d and tab, enter without reading it until after the action was performed which resulted in /dev/ files being deleted (folders within are still there because I didn't do "rm -r").


    Where can I get those files? What should I do? 

  4. 3 minutes ago, trurl said:

    SSDs in the array are not recommended. They cannot be trimmed, some implementations might invalidate parity, and in any case they can't be written faster than parity anyway so I don't know why you would want to do this.


    SSDs in the cache pool or as Unassigned Devices is what everyone else does.

    Thanks, I'll use it as cache then.

  5. GPU: (AMD Radeon RX580)

    Since Ryzen 3700x has no integrated graphics, I had a GPU plugged in the first time I booted unraid. It started but just kept saying "amd-vi: completion-wait loop timed out." Eventually, I just shut it off, removed the GPU and it booted up fine. IOMMU is enabled in the BIOS and SVI is also enabled. I rebooted again, this time, I checked the BIOS to make sure the m.2 ssd is detected; it is but it's not showing in unraid.


    System boots and detected the GPU only if IOMMU is disabled. 



    • Crucial 32GB CT2K16G4DFD8266 ECC
    • EVGA 650W Supernova GQ 80+ Gold
    • (AMD Radeon RX580 8GB)
    • WD Blue SN500 500GB NVMe Internal SSD - Gen3 PCIe, M.2 2280, 3D NAND - WDS500G1B0C


    • Model: Custom

      M/B: ASRock B450M Steel Legend Version 

      BIOS: American Megatrends Inc. Version P2.50 (7/25/2019)

      CPU: AMD Ryzen 7 3700X 8-Core @ 3600 MHz

      HVM: Enabled

      IOMMU: Enabled

      Cache: 512 KiB, 4096 KiB, 32768 KiB

      Memory: 32 GiB DDR4 (max. installable capacity 128 GiB)

      Network: bond0: fault-tolerance (active-backup), mtu 1500 
       eth0: 1000 Mbps, full duplex, mtu 1500 
       eth1: interface down
       eth2: interface down
       eth3: interface down
       eth4: interface down

      Kernel: Linux 4.19.56-Unraid x86_64

      OpenSSL: 1.1.1c