SeattleBandit

Members
  • Posts

    64
  • Joined

  • Last visited

Everything posted by SeattleBandit

  1. I was initially - but then switched it to my docker network hoping that would change things - no change I'll switch it back to bridge mode and test again now though EDIT :: docker run is including the ports -p '3232:8080/tcp' -p '32331:8081/tcp' post switching back to bridge mode Host is up (0.00048s latency). PORT STATE SERVICE VERSION 32331/tcp closed unknown
  2. So I'm coming here because I'm at a bit of a loss - I've configured my calibre server happily and its been running for years - but I just recently decided to set up readarr and have it integrate with calibre - but for whatever reason - Unraid isn't opening the web server port used for running calibre's content server - I've configured it for port 32331 in the Unraid config and restarted the container several times - turned on the server in calibre and configured a user and pass etc - but when I run nmap against the port on my Unraid server it is closed - I would expect to see a what.. bonjour opds service running on that port yeah? going to do a reboot of my entire Unraid server and report back EDIT :: just did a full reboot - VNC gui comes up fine - but nmap pulls still show port is closed - is this a version issue? I'm running the :latest container
  3. you figure out your issues? this has been working for like a charm for the past year + feeding data to my influxdb and all of a sudden i'm getting the speedtest fail log message edit i seem to be getting ssl errors - still digging edit sounds like this might be related to the underlying docker framework update in 6.12.1 ... based on some errors from another similar docker
  4. Super helpful - thank you very much - late to the game by three years - but was setting up a new box and this was helpful as i was relearning how to set things up
  5. I just had to recover my isb stick that unRAID runs on - got everything back up and running but for whatever reason shinysdr can open the USB connection to my rtl-sdr - has anyone experienced similar issues? If I use the sdr I have connected for my fr24 adsb it works fine so it's not the radio Updated the config per guidance in this channel - tried running in privikiged mode - removed and reinstalled - still no dice Sent from my iPhone using Tapatalk
  6. it blew away my custom docker network - recreating that and i'll hopefully be back fully operational
  7. yeah i found a reddit post saying all your configs and stuff don't get nuked - so passwords and api keys are retained - i move my old docker image and kicked things off with a new one and am reinstalling everything and thus far no issues... i am concnerned about that btrs device loop but i'm not seeing it in the logs anymore
  8. Jun 5 13:27:07 Nighthawks root: Fix Common Problems: Error: Unable to write to Docker Image Jun 5 13:39:01 Nighthawks kernel: BTRFS error (device loop2): unable to find ref byte nr 5920882688 parent 0 root 7 owner 0 offset 0 Jun 5 13:39:01 Nighthawks kernel: BTRFS: Transaction aborted (error -2) Jun 5 13:39:01 Nighthawks kernel: BTRFS: error (device loop2) in __btrfs_free_extent:3092: errno=-2 No such entry Jun 5 13:39:01 Nighthawks kernel: BTRFS: error (device loop2) in btrfs_run_delayed_refs:2144: errno=-2 No such entry Jun 5 13:39:01 Nighthawks rc.docker: xteve: Error response from daemon: failed to update store for object type *libnetwork.endpoint: no such file or directory Jun 5 13:39:01 Nighthawks rc.docker: Error: failed to start containers: xteve Jun 5 13:39:02 Nighthawks rc.docker: binhex-prowlarr: Error response from daemon: failed to create endpoint binhex-prowlarr on network bridge: failed to save bridge endpoint 2ca7ca3 to store: failed to update bridge store for object type *bridge.bridgeEndpoint: open /var/lib/docker/network/files/local-kv.db: read-only file system Jun 5 13:39:02 Nighthawks rc.docker: Error: failed to start containers: binhex-prowlarr Not clear what the BTRFS error (device loop2) means - not super excited about removing the docker.img and reinstalling everything ... increasing docker.im size did not help
  9. had a kernel panic bring down my server and now i keep seeing this in my logs -> /var/lib/docker/network/files/local-kv.db some docker containers start up happily but others keep giving me these types or errors and when i try and manually start them or remove a container i get a 'server error' Jun 5 13:17:51 Nighthawks rc.docker: tautulli: Error response from daemon: failed to create endpoint tautulli on network tjvnet: failed to save bridge endpoint 7f200b4 to store: failed to update bridge store for object type *bridge.bridgeEndpoint: open /var/lib/docker/network/files/local-kv.db: read-only file system Jun 5 13:17:51 Nighthawks rc.docker: Error: failed to start containers: tautulli perhaps my docker stack was screwed up due to the unclean shutdown last night? anyone have any suggestions? FIx common problems says its unable to write to docker image because its either full or corrupted - going to try increasing the docker image size ...
  10. boom - simple as that - thanks for the info - once the smart is done i'll just rebuild - thanks
  11. So i'm moving all my stuff from a 'gravity rack/stack' (wire shelves from ace) to a proper rack - with a nice 48 port switch and patch panel etc etc etc running a supermicro 24bay hot swap chassis last night i pulled what i thought was an empty bay (i got lazy with my label maker apparently) from my live array - when i realized my mistake i brought my stack down, plugged the drive in - brought everything back up - and now my disk 5 is unhappy and is disabled and all data is running emulated. It is reading the drive and smart health - i'm currently running the extended/full smart test - only 45% complete - my question is once the smart test is complete and (i'm assuming) says there are no issues - how do i go about making disk 5 happy and healthy so i can bring my array back to full strength?? last nigth before kicking off the complete smart test i booted into maintennance mode and ran the check disk and it didn't seem to throw any errors? i'm not sure how to read that report - but it looked mostly similar to a report i ran on a healthy disk what should my next steps be? unfortunately my syslog is swamped with the below (running a couple SAS drives which i believe are causing this) i'm preclearing new drives to replace my sas drives which will hopefully fix the below Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it!
  12. yeah - solved my own issue - must not have had the container off when i did the initial copy
  13. Migrating the config folder from /mnt/user/appdata/binhex-plexpass to /mnt/user/larger-cache/binhex-plexpass results in a malformed sqllite (if memory serves) Error: Unable to set up server: sqlite3_statement_backend::prepare: database disk image is malformed for SQL: PRAGMA cache_size=2000 (N4soci10soci_errorE) i used rsync -avPr will the containers were stopped to move everything - does anyone have any ideas on why this is an issue?
  14. this allows for greater selection of the IP range as well - with the default i ran into conflicts when i tried to connect to my vpn server from a network that had the same subnet my unraid server used - with this i can assign a different unique subnet to my clients - (i couldn't figure out how to get that to work with the built in unraid plugin maybe i'm a bonehead but i didn't see a way)
  15. @lockrob2000 Did you fix this? I m using a shield and have gone in and reset the preferences a couple times to no avail Am I missing something server side? Sent from my iPhone using Tapatalk
  16. After a recent update - while watching a series - it no longer auto plays the next episode - it's a small gripe - but I was curious if anyone has seen something similar For clarity I'll watch episode 12 of show X - and when episode 12 ends USUALLY episode 13 will play after a 10 second ish countdown Now after I watch episode 12 it just acts like there are no new unplayed episodes
  17. so there is no way to have the wireguard plugin set to use a VLAN instead of the servers primary subnet? because changing my server to a new subnet would be a pita
  18. so i did some light digging and came up light on answers - but i've been running this plugin happily for quite a while i JUST experienced an issue where i happened to be on a subnet that had the same range as my unraid server subnet - this seemed to break my wireguard plugin andi my dirty reddit and news traffic was exposed to whatever wifi network i was on i was curious how i would go about setting the wireguard plugin to operate on a totally unique vlan/subnet that i would set up on my ubiquiti gear - are there any guides/howtos/cheetsheeets/etc on this process ?? any help would be appreciated
  19. interestingly - i've lost the ability to 'login' to sabnzb - i get prompted for my login/pasword - enter then and it immediately dumps be back to the login screen - it still appears to be working as its processing grabs from various services but ican't log into (at least on this machine haven't tried others or incognito yet... probably should) edit: pebcak apparently - incognito fixed it - must be a cookie/cache issue
  20. so i am looking at standing back up a self hosted standard notes server - because the last docker broke for whatever reason and i moved on but now it actually need it -- so i went searching for the latest docker standardnotes/standalone on docker hub in the CA store and came up dry ... https://github.com/standardnotes/standalone is there a reason it isn't showing up in the search results? if so is there a way to manually add it?
  21. @Sharpiesoooo ... again blind leading the blind here - turns out dimension perhaps isn't really necessary ideally what im trying to do is to stand up a stack that will be a matrix messenger - that will integrate all the 'major' chat services telegram isntagram linkedin hangouts imessage discord slack signal and a few others there is a service out there called beeper which already does this - but its all open source software for their back end - and while their app is sexier than element - if i can accomplish the same thing for free then i'm a happy camper - also keeping everything self hosted makes me happy even if i can't have data center redundancy once i get some stacks up and running - and figure out the bridges - i'll do a write up and post it here - i'll try and incorporate the privious how-tos for a soup to nuts type solution targeted at unraid users
  22. @Sharpiematrix-dimension is a integration manager - that allows you to run different bridges such as telegram or hangouts and handle them all in element (allegedly) i've been messing with it - i got dimension up and working - would be happy do do a little write up if you are interestd - but as i'm still learnbing HOW to use the software it would be a bit of the blind leading the blind. but now i'm running into issues sending DM's to normal users on matrix.org - i can send from my personal server (homeserver) and the receiver (matrix.rog) is unable to accept the chat - nor am i able to create a DM from my matrix.org acct to my homeserver ... but i can log into and post in public rooms.....
  23. oooh - i also discovered that my matrix server is not seeing other servesr ....
  24. has anyone set up dimension to work with their stack? i have matrix and element up and running happily thanks to this thread - but now i wnt to add some custom bridges to the matrix stack - i have matrix-dimension up and running and talking to my server but now am kind of at a loss ....