wirelessness

THIS worked for me.

^^^ This sounds like the way to go. I use sabtosickbeard and CP so it should not be a problem setting up like this. Will do so right now. THANKS!!!

I think I do understand what you are saying, but I guess I don't want to do it that way because my cache drive will fill up with shows and movies if the files aren't offloaded to the Array. Of course I could do that manually but that would be a hassle. It sounds like the only other option is to just set the ../Downloads directory to a share or drive directly onto the array. I guess I don't really understand why you guys are storing all the sabnzbd downloaded content on the cache drive? Then it's not protected and the storage capacity is much lower. What am I missing here? Sorry for all the questions but I don't want to do this wrong and then have to go back and change everything or worse...loose all my files if the cache drive dies.

Yes, the share is not set to cache only. Only the application data store /mnt/cache/appdata is set to cache only. I DO want my movies and shows to be moved off to the array. My cache drive is not large enough to store everything. But when this happens the everything in the /completed/TV directory is moved and sickbeard gets confused when the show name directory is then missing. The sabtosickbeard script fails as well after the the entire show directories are moved to the array.....?

Hi, Thanks for all the detailed responses. I've got all my apps working using the influencer plugins by following this guide: http://lime-technology.com/wiki/index.php/Setting_Up_SABnzbd,_SickBeard,_and_CouchPotoato I've used all these apps before but not w/ unRAID so that is the only new variable. Everything seems to be working correctly now except for ONE thing: My Downloads directory is /mnt/cache/sabnzbd/Downloads/complete/TV for sickbeard. Using the sabtosickbear.py script everything goes into there just fine. The problem is, at night the mover script comes and moves ALL the folder from the ../TV directory. Then when new episodes are downloaded the the post-processing fails because the ../TV/showname folder is no longer there. I'm sure something is not setup correctly. Any advise would be greatly appreciated.

I am using the sickbeard post-processing script. However, I don't have my apps installed in /.sabnzbd directories for some reason. Using the 'installplg' method from the wiki they are just installed in and apps folder on my cache drive. I have another dilemma now though. The mover script is kicking in and moving everything from my sabnzbd/Downloads/complete/TV folder to the array which good. But it's moving the root folder of my TV shows and then sickbeard starts show 'directory not found' because the folder in with the show name is now gone. What do people do about this?

I'm sort of doing that now in that my download directories are not in /mnt/user/../ but that does not seem to be triggering the mover script. I must be doing something wrong.....do I need to enable the mover function?

I've gone ahead and setup SABnzbd/Sickbeard/Couchpotato on an apps directory on my Cache Drive. The part I am not sure about is where best to set my download directories for pre and or post processing? I've read that using /user/sharexyz/Downloads/complete/TV is not efficient because files end up getting copied back and forth or something. Honestly I don't understand what the best practice should be. Any input would be greatly appreciated.

I'm not expert and perhaps this is already widely known but I ran into this when installing AirVideo via Package Manager. The following url is bad for some reason. This will make the install of AirVideo fail showing a 'corrupt' file. http://lp.slackwaresupport.com/Slackware-11.0/X11/mpeg4ip/mpeg4ip-1.5.0.1-i486-1ahl.tgz All I did was navigate to the /boot/packages directory and delete the existing mpeg4ip-1.5.0.1-i486-1ahl.tgz that apparently is created. Then do a wget from a mirror source that has the file properly hosted. Then perform the install of AirVideo again via Package Manager. Example of a good url: http://slackware.cs.utah.edu/pub/linuxpackages/Slackware-11.0/X11/mpeg4ip/mpeg4ip-1.5.0.1-i486-1ahl.tgz Like I said, I'm not expert and this might be well known. Most people could probably figure this out on their own but I thought I would share just in case.

Hmm... My MB has 2 PCIE 2.0 x16 and 2 PCIE 2.0 x1 slots.... I can always change my MB I guess. Using an AMD3+ CPU right now.

Just wondering, right now I have a desktop MB w/ 6 SATA Ports. I am expecting to grow beyond that soon. Is it a big deal to move the a SAS Controller later?

I do have /boot/config but I'm not sure if it's configured correctly. Networking is working properly. I will try to debug the config file. Should I attach the boot/config?

Hi, I'm inserting the output of my syslog data. Not sure what else to do here. I finally got the 32bit drivers loaded on my system so emhttp seems to be working on that level. However, when I launch emhttp -p 88 I don't appear to get the web utility running properly and can't see it from my browser. Here is the output of my syslog. I hope this helps. Thanks!!! Jun 19 09:59:17 UNRAID emhttp: get_flash_info: readlink: No such file or directory Jun 19 09:59:17 UNRAID emhttp: get_config_idx: fopen /boot/config/ident.cfg: Not a directory - assigning d efaults Jun 19 09:59:17 UNRAID emhttp: put_config: fopen /boot/config/ident.cfg: Not a directory Jun 19 09:59:17 UNRAID emhttp: get_config_idx: fopen /boot/config/network.cfg: Not a directory - assigning defaults Jun 19 09:59:17 UNRAID emhttp: get_config_idx: fopen /boot/config/flash.cfg: Not a directory - assigning d efaults Jun 19 09:59:17 UNRAID emhttp: _shcmd: shcmd (1): exit status: 1 Jun 19 09:59:17 UNRAID emhttp: get_config_idx: fopen /boot/config/share.cfg: Not a directory - assigning d efaults Jun 19 09:59:17 UNRAID emhttp: read_tokens: fopen /boot/config/disk.cfg: Not a directory Jun 19 09:59:17 UNRAID emhttp: get_device_size: ioctl BLKGETSIZE64: () Inappropriate ioctl for device Jun 19 10:02:39 UNRAID kernel: [ 0.537546] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jun 19 10:02:39 UNRAID kernel: [ 0.537753] DLM (built Apr 9 2011 22:44:24) installed Jun 19 10:02:39 UNRAID kernel: [ 0.541140] OCFS2 User DLM kernel interface loaded Jun 19 10:02:39 UNRAID udevd[1822]: bind failed: Address already in use Jun 19 10:02:39 UNRAID udevd[1822]: error binding control socket, seems udevd is already running Jun 19 10:02:39 UNRAID kernel: [ 0.541903] GFS2 (built Apr 9 2011 22:45:04) installed Jun 19 10:02:39 UNRAID kernel: [ 3.833002] Compaq SMART2 Driver (v 2.6.0) Jun 19 10:02:39 UNRAID kernel: [ 3.834575] scsi: <fdomain> Detection failed (no card) Jun 19 10:02:39 UNRAID kernel: [ 3.834898] Emulex LightPulse Fibre Channel SCSI driver 8.3.18 Jun 19 10:02:39 UNRAID kernel: [ 3.834952] Copyright© 2004-2009 Emulex. All rights reserved. Jun 19 10:02:39 UNRAID kernel: [ 3.835796] GDT-HA: Storage RAID Controller Driver. Version: 3.05 Jun 19 10:02:39 UNRAID kernel: [ 3.835920] 3ware Storage Controller device driver for Linux v1.26.02.00 3. Jun 19 10:02:39 UNRAID kernel: [ 3.835996] 3ware 9000 Storage Controller device driver for Linux v2.26. 02.014. Jun 19 10:02:39 UNRAID kernel: [ 4.804522] usb usb8: No SuperSpeed endpoint companion for config 1 int erface 0 altsetting 0 ep 129: using minimum values Jun 19 10:02:39 UNRAID kernel: [ 4.812146] PNP: PS/2 appears to have AUX port disabled, if this is inco rrect please boot with i8042.nopnp Jun 19 10:02:39 UNRAID kernel: [ 4.813676] synth name on entry is: (null) Jun 19 10:02:39 UNRAID kernel: [ 4.830402] registered taskstats version 1 Jun 19 10:02:39 UNRAID kernel: [ 4.832817] EXT3-fs (sda6): error: couldn't mount because of unsupported optional features (240) Jun 19 10:02:39 UNRAID kernel: [ 4.833153] EXT2-fs (sda6): error: couldn't mount because of unsupported optional features (240) Jun 19 10:02:39 UNRAID kernel: [ 4.877301] VFS: Mounted root (ext4 filesystem) readonly on device 8:6. Jun 19 10:02:39 UNRAID kernel: [ 5.949459] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jun 19 10:02:39 UNRAID kernel: [ 7.512286] Console: switching to colour frame buffer device 240x75 Jun 19 10:02:41 UNRAID rpc.statd[1953]: Failed to read /var/lib/nfs/state: Success Jun 19 10:02:41 UNRAID rpc.statd[1953]: Running as root. chown /var/lib/nfs to choose different user Jun 19 10:02:42 UNRAID kernel: [ 16.033144] svc: failed to register lockdv1 RPC service (errno 97). Jun 19 10:02:42 UNRAID kernel: [ 16.033180] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recov ery directory Jun 19 10:02:42 UNRAID kernel: [ 16.033187] NFSD: unable to find recovery directory /var/lib/nfs/v4recov ery Jun 19 10:02:42 UNRAID mountd[1970]: Kernel does not have pseudo root support. Jun 19 10:02:42 UNRAID mountd[1970]: NFS v4 mounts will be disabled unless fsid=0 Jun 19 10:02:42 UNRAID mountd[1970]: is specfied in /etc/exports file. Jun 19 10:02:45 UNRAID console-kit-daemon[2069]: WARNING: Failed to acquire org.freedesktop.ConsoleKit Jun 19 10:02:45 UNRAID console-kit-daemon[2069]: WARNING: Could not acquire name; bailing out Jun 19 11:32:00 UNRAID sshd[2348]: error: Could not get shadow information for root Jun 19 11:33:09 UNRAID emhttp: get_flash_info: readlink: No such file or directory Jun 19 11:33:09 UNRAID emhttp: get_config_idx: fopen /boot/config/ident.cfg: Not a directory - assigning d efaults Jun 19 11:33:09 UNRAID emhttp: put_config: fopen /boot/config/ident.cfg: Not a directory Jun 19 11:33:09 UNRAID emhttp: get_config_idx: fopen /boot/config/network.cfg: Not a directory - assigning defaults Jun 19 11:33:09 UNRAID emhttp: get_config_idx: fopen /boot/config/flash.cfg: Not a directory - assigning d efaults Jun 19 11:33:09 UNRAID emhttp: _shcmd: shcmd (1): exit status: 1 Jun 19 11:33:09 UNRAID emhttp: get_config_idx: fopen /boot/config/share.cfg: Not a directory - assigning d efaults Jun 19 11:33:09 UNRAID emhttp: read_tokens: fopen /boot/config/disk.cfg: Not a directory Jun 19 11:33:09 UNRAID emhttp: get_device_size: ioctl BLKGETSIZE64: () Inappropriate ioctl for device Jun 19 11:39:07 UNRAID sshd[2379]: error: Could not get shadow information for root

I wish this forum had a thanks or thumbs up feature!!!

I just can't get past the part where you download the 32bit Libraries from http://www.slackware.com/~alien/multilib/ The multilib directions assume you already know how to do everything they describe. And if you don't know how then you are on your own to figure it out. I just can't get passed the part where you get the files down from the website. It doesn't walk you through doing it. I try running the lftp commands but it's not working for me. Nothing seems to be downloading so I can't perform the upgrade. Oh well, I think I am just going to start over with a 32bit installation instead which really sucks because I have 16gb of RAM. If someone could maybe walk me through this part with some more details I would be so grateful!!!