flinte

Im in your same boat. I would like to just move to a single CPU consumer grade Ryzen with ECC memory but open to a newer Xeon solution.

Yes there are and I could of course migrate to such a solution. I would just need to alter my strategy a bit is all and if that is the recommendation I can certainly do that. It sounds like a slippery slope, If that is the recommendation then why continue to have Borg in the list of packages.. or really any of the packages that depend on python3.. or any package that have any package dependancies?

@EUGENI_CAT This continues to be a problem/bug. I have isolated the root cause to be that on reboot python 3.9 regularly DOES NOT get installed correctly and anything that depends on that package, in my case borg which I depend upon for unraid appdata backups, is broken. The result is after every reboot I have to manually intervene and remove and reinstall borg, python 3.9 and all other dependancies else all my backups will fail. Just a thought, could nerdtools not install a package manager like apt or yum/dnf (whatever base slackware uses, im not very familiar with slackware). My thought is just that a good package manager will handle installation success/fail better plus better dependency resolution.

So any ETA for a work around or a patch? I am suffering on this one. Possibly unrelated, I seem to be experiencing system instability with system crashes after I run `/etc/rc.d/rc.nfsd start` manually. disregard I see Version 6.12.2 2023-06-29 came out yesterday.

fyi, I was able to find the root cause of this was python 3.9 (a dependency) was failing to install at boot. I was able to remove the python + borg packages then reinstall via the nerd tools gui and then everything was fine.

Two arrays that I have - Borgbackup stopped working on both - same error: root@nas01:~# borg --help Traceback (most recent call last): File "/usr/bin/borg", line 33, in <module> sys.exit(load_entry_point('borgbackup==1.2.4', 'console_scripts', 'borg')()) File "/usr/bin/borg", line 22, in importlib_load_entry_point for entry_point in distribution(dist_name).entry_points File "/usr/lib/python3.9/importlib/metadata.py", line 524, in distribution return Distribution.from_name(distribution_name) File "/usr/lib/python3.9/importlib/metadata.py", line 187, in from_name raise PackageNotFoundError(name) importlib.metadata.PackageNotFoundError: borgbackup Anyone else have a borg currently working or did this recent update cause an issue?

Can this be utilized with Office365 instead of Gmail? I find that its quite finicky and a lot of my other self hosted applications SMTP notification settings cant use it. I would love to have a local postfix relay that I could point those applications to.

I didnt find a solution to this problem with the SMB share, but I have found a work around for now. on my Mac I had to go into Settings --> Security & Privacy --> Full Disk Access and approve Terminal.app. That is in prep for the next part. Mount your Unraid SMB share ("SMB-TM-UNRAID" in this example) to the Mac client. open terminal and run: sudo hdiutil create -size 300g -type SPARSEBUNDLE -nospotlight -volname "SMBTimeMachine" -fs "Case-sensitive Journaled HFS+" -verbose /Volumes/SMB-TM-UNRAID/$HOST_TimeMachine.sparsebundle Navigate to the directory /Volumes/SMB-TM-UNRAID/ in finder and click the .sparcebundle file to mount it as a disk. This will mount a new disk called SMBTimeMachine to your Mac. open terminal and run: sudo tmutil setdestination -a "/Volumes/SMBTimeMachine/" open Time Machine utility and configure. Youll need to configure Mac to remount these shares at boot. Settings --> Users & Groups --> Your User --> Login Items. Drag the mounted drives SMB-TM-UNRAID and SMBTimeMachine into the login items window.

I got a new M1x macbook pro. I want to setup my Unraid server as a time machine target. I used the following guide I enabled Enhanced Mac OS interoperability, then I created a new share and created the tm share with the time machine capacity limit. When I connect to the SMB share then open the time machine app I see no offer to use the share as a time machine target... I tried to manually add it from the CLI and also no dice: flinte@Flintes-MBP ~ % sudo tmutil setdestination "/Volumes/tm-tony/" /Volumes/tm-tony: Disk does not support Time Machine backups. (error 45) The backup destination could not be set. Anyone out there using Unraid as a TM target with Mac os 12? Anyone have any thoughts on something I have missed in the config or maybe is this a regression/bug in Mac os 12?

Im posting this here, I am unsure if this is a true request as I am happy to build this myself I am just unsure if it is feasible and tbh I would appreciate finding someone else who would like to use this application to help. So on my old QNAP and Synology NAS arrays I used Acronis True Image Mobile to backup up my households smart phones and devices Android and iOS. There are a million and one products like this for android but nearly nothing like this for iOS beyond icloud for a monthly charge. This product is made for QNAP and Synology and available in their app stores. I am wondering if we can convert it to a docker container to run on unraid? https://kb.acronis.com/ati2019/nas-app https://download.qnap.com/QPKG/GUIDE/AcronisTrueImage_Tutorial.pdf https://www.blackvoid.club/acronis-true-image-mobile-on-premise-backup-for-your-mobile-device/ One problem I see is that the applications are qpkg or spk files. We would need to install that directly to an alpine linux container... Please PM me if you can help me.

I am unsure. I thought I got it from your dockerhub page .. regardless removal of these lines worked

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='code' --net='reverse-proxy' -e TZ="America/Denver" -e HOST_OS="Unraid" -e 'PASSWORD'='' -e 'SUDO_PASSWORD'='NunY0Businass!' -e 'HTTPS_PROXY'='https://192.168.11.3' -e 'DOCKER_MODS'='linuxserver/mods:code-server-powershell|linuxserver/mods:code-server-python3' -e 'HTTP_PROXY'='http://192.168.11.3' -e 'PUID'='99' -e 'PGID'='100' -p '11443:8443/tcp' -v '/mnt/user/appdata/code-server':'/config':'rw' -v '/mnt/user/software/Scripts':'/workspace':'rw' 'linuxserver/code-server' 8cf52278e45640c43f3a34724c3ae5d55d377d949116ee4b9702f4219b3910ad The command finished successfully!

I recently lost and had to rebuild my docker.img file settings in unraid, I had this running perfectly with MODS previously but now I seem to be running into issues. I assume I have messed up somewhere but I cant seem to locate my error. A second set of more experienced eyes are welcomed. [mod-init] Attempting to run Docker Modification Logic [mod-init] Applying linuxserver/mods:code-server-powershell files to container gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error is not recoverable: exiting now [mod-init] Applying linuxserver/mods:code-server-python3 files to container gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error is not recoverable: exiting now

@glompy please clarify, there is no plugin called "Dynamix system settings plugin". Where did you unload the kernel modules?

I think changing Anamorphic to Loose has resolved it.

Can anyone tell me how to make this container respect the max resolution settings in my preset? I want source file larger than 1080P (such as 4k) to be reduced down to 1080P but anything smaller will remain original size.

fyi the default support url in the docker container has a typo.

just wanted to second the Joplin request. They offer a web app and its already dockerized. I suspect it would be trivial enough to create an unraid template for this from the docker compose source. https://github.com/foxmask/joplin-web

I have verified all my settings, VPN_PROTOCOL is set to udp, NAME_SERVERS. I am thinking this has to be something else. 2020-06-25 00:22:34.758528 [info] Permissions already set for volume mappings 2020-06-25 00:22:34.803354 [info] VPN_ENABLED defined as 'yes' 2020-06-25 00:22:34.852415 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/torgaurd.ovpn dos2unix: converting file /config/openvpn/torgaurd.ovpn to Unix format... 2020-06-25 00:22:34.905846 [info] VPN remote line defined as 'remote us-slc.secureconnect.me 1912' 2020-06-25 00:22:34.943237 [info] VPN_REMOTE defined as 'us-slc.secureconnect.me' 2020-06-25 00:22:34.975424 [info] VPN_PORT defined as '1912' 2020-06-25 00:22:35.012189 [info] VPN_PROTOCOL defined as 'udp' 2020-06-25 00:22:35.042827 [info] VPN_DEVICE_TYPE defined as 'tun0' 2020-06-25 00:22:35.073059 [info] VPN_PROV defined as 'custom' 2020-06-25 00:22:35.103400 [info] LAN_NETWORK defined as '192.168.1.0/24' 2020-06-25 00:22:35.134825 [info] NAME_SERVERS defined as '84.200.70.40,84.200.69.80,209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4' 2020-06-25 00:22:35.166555 [info] VPN_USER defined as '#########' 2020-06-25 00:22:35.196731 [info] VPN_PASS defined as '#########' 2020-06-25 00:22:35.228146 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2020-06-25 00:22:35.260177 [info] ENABLE_PRIVOXY defined as 'no' 2020-06-25 00:22:35.291090 [info] Starting Supervisor...

I have been running the nzbget+vpn container for over a year without touching the config but a couple days ago it stopped functioning. I am getting an error unable to resolve the dns name of the vpn server "cannot be resolved, possible DNS issues". Has anyone seen this before? I consoled into the container and I can ping the fqdn of the vpn server just fine. the DNS resolves the name. [info] VPN is enabled, beginning configuration of VPN 2020-06-24 18:15:02,185 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-06-24 18:15:02,185 INFO success: nzbget-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-06-24 18:15:02,186 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-06-24 18:15:02,187 DEBG 'nzbget-script' stdout output: [info] Nzbget config file already exists, skipping copy 2020-06-24 18:15:02,188 DEBG fd 17 closed, stopped monitoring <POutputDispatcher at 22852840142608 for <Subprocess at 22852840174656 with name privoxy-script in state RUNNING> (stdout)> 2020-06-24 18:15:02,189 DEBG fd 21 closed, stopped monitoring <POutputDispatcher at 22852841104664 for <Subprocess at 22852840174656 with name privoxy-script in state RUNNING> (stderr)> 2020-06-24 18:15:02,189 INFO exited: privoxy-script (exit status 0; expected) 2020-06-24 18:15:02,189 DEBG received SIGCLD indicating a child quit 2020-06-24 18:15:02,198 DEBG 'start-script' stdout output: [warn] Password contains characters which could cause authentication issues, please consider changing this if possible 2020-06-24 18:15:02,211 DEBG 'nzbget-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2020-06-24 18:15:02,312 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2020-06-24 18:15:02,316 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2020-06-24 18:15:02,321 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2020-06-24 18:15:02,325 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2020-06-24 18:15:02,328 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2020-06-24 18:15:02,390 DEBG 'start-script' stdout output: [crit] us-slc.secureconnect.me cannot be resolved, possible DNS issues 2020-06-24 18:15:02,391 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22852840174512 for <Subprocess at 22852840174080 with name start-script in state RUNNING> (stdout)> 2020-06-24 18:15:02,391 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22852840175088 for <Subprocess at 22852840174080 with name start-script in state RUNNING> (stderr)> 2020-06-24 18:15:02,391 INFO exited: start-script (exit status 1; not expected) 2020-06-24 18:15:02,391 DEBG received SIGCLD indicating a child quit

you need to go to the top of the container configuration page and toggle basic view to advanced view

you cant get to the web interface because the default web port for the container is pointed at 8282 but the webserver is running on port 80. Edit the server port setting to look like mine below. Thats how I fixed mine, seems to be a misconfiguration in the unraid docker template

The following DHCP configuration steps worked for my Asus-Merlin powered RT-AC86U 1. Go to http://192.168.1.1/Advanced_System_Content.asp and Enable JFFS custom scripts and configs -> Yes Enable SSH -> LAN only select SSH port as you wish. Apply settings and reboot device. 2. Make ssh connection to your device (i use putty). Connection type SSH, router ip, your custom ssh port, username and password same as for GUI. 3. Type: df -h Make sure that /dev/mtdblockX mounted to /jffs 4. Type: vi /jfss/configs/dnsmasq.conf.add 5. Press i to activate interactive mode and type the following (change the IP for your netboot.xyz server): dhcp-match=set:bios,60,PXEClient:Arch:00000 dhcp-boot=tag:bios,netboot.xyz.kpxe,,192.168.1.3 dhcp-match=set:efi32,60,PXEClient:Arch:00002 dhcp-boot=tag:efi32,netboot.xyz.efi,,192.168.1.3 dhcp-match=set:efi32-1,60,PXEClient:Arch:00006 dhcp-boot=tag:efi32-1,netboot.xyz.efi,,192.168.1.3 dhcp-match=set:efi64,60,PXEClient:Arch:00007 dhcp-boot=tag:efi64,netboot.xyz.efi,,192.168.1.3 dhcp-match=set:efi64-1,60,PXEClient:Arch:00008 dhcp-boot=tag:efi64-1,netboot.xyz.efi,,192.168.1.3 dhcp-match=set:efi64-2,60,PXEClient:Arch:00009 dhcp-boot=tag:efi64-2,netboot.xyz.efi,,192.168.1.3 press ESC then press :qw! and press ENTER. 6. Type reboot or recycle the services with service restart_dnsmasq and service restart_dhcp

Josh I have been using this thing for months. I like a fire and forget it encoder like this for my tv show directory. I completely switched from h265ize to this. Its really like it. One quick feature request if you agree its a good idea. Id like a "niceness" setting like on my Handbrake container. Id like to set the niceness of this thing higher so that it gives way to my plex server streams. Thanks for the consideration. ps - I think it would also be nice to be able to specify a 8, 10, 0r 12 bit HEVC encode as well but thats not as important to me as above.

My favorite feature of unraid has to be the dashboard. All your NAS information at a glance. Beyond that, it’s Linux based so we get all the The great software and features of the Linux kernel such as Docket container support and KVM machines. id love to see a clustering feature in a future release that would allow containers and virtual machines to fail over to another node in even of an outage. Maybe use Kubernetes or docker swarm to accomplish this?