AcidRainX

And this from a mod… sometime it's better write nothing… I am using the plugin, and the log posted from stri is also from the plugin… and what hardware issue could it be, when it's working perfect with 6.9.2 but not with 6.11.5?

No support or questions, or something to help? No asking for further informations or something else?

Having the same issue… After Update to v6.11.5 System hangs completely after wake from sleep. Not always, maybe its working 6-8 days, they system freezes after wakeup. using an Intel i5 7400 on an MSI B250M PRO-VDH Board. with Unraid v6.9.2 everything works fine.

Small update of the prices, and added the firewall...

Preisupdate, und jetzt neu dazu die Firewall

Kleiner Push, wegen Preisupdate

can I push this? Little price update

Hallo zusammen, wie im Buy/Sell/Trade Forum schon gepostet, verkaufe ich meine alte, wenig benutzten und in perfekten Zustand befindliche Hardware meines Servers. Beschreibung und Bilder findet ihr über eBay-Kleinanzeigen, hoffe das ist OK, das so zu posten. RAM: https://www.ebay-kleinanzeigen.de/s-anzeige/samsung-ddr4-16-bzw-64-gb-ecc-ram-mit-2400-mhz-registered-dimm/1895696621-225-8791 Preis dort ist angegeben pro Riegel. Bei einer Abnahme aller 4 Riegel gibts natüprlich nochmal Rabatt obendrauf... CPU: https://www.ebay-kleinanzeigen.de/s-anzeige/intel-xeon-cpu-e5-2620-v4-8-kerne-16-threads-mit-2-10-ghz-/1885103516-225-8791 Firewall: https://www.ebay-kleinanzeigen.de/s-anzeige/securepoint-firewall-rc200-g3-utm-opnsense-moeglich-/1901535913-225-8791 Und generell gilt, für Unraid-Nutzer gibts nochmal einen 10% Rabatt obendrauf... Einfach kurz mit dem usernamen hier melden und man wird sich sicherlich einig. Grüße

Thank you for that advise, but I don‘t see any sub forum or part in the german subforum for selling/buying, and I don‘t think it‘s a good position in the „main part“ of the subforum… just hope, that the germans see this post too, even it isn‘t in the german part.

Hello, I want to sell my old, used, but in perfect condition, hardware from my little used server. I switch to something "lower", not so "overpowered". I hope I can post some link from "ebay-kleinanzeigen", there's a description (in german), fotos and price. (don't like double work :)) RAM: https://www.ebay-kleinanzeigen.de/s-anzeige/samsung-ddr4-16-bzw-64-gb-ecc-ram-mit-2400-mhz-registered-dimm/1895696621-225-8791 Price in anouncement ist per bar, if you buy all 4 bars, there's a little disount. CPU: www.ebay-kleinanzeigen.de/s-anzeige/intel-xeon-cpu-e5-2620-v4-8-kerne-16-threads-mit-2-10-ghz-/1885103516-225-8791 Firewall: https://www.ebay-kleinanzeigen.de/s-anzeige/securepoint-firewall-rc200-g3-utm-opnsense-moeglich-/1901535913-225-8791 For all the prices you can see in these announcement, I give for Unraid-Forum users a 10% dicount. Just send me a message with your username here. best regards

do you run a Vm? currently i‘m running 6.8.1 and the old dvb Version of Unraid from linuxserver.io... I‘m a littlebit afraid of upgrading, because there‘s no ability of downgrade to the Unraid v6.8.1 dvb Edition. i‘m using digitial devices dvb-c2, 4 tuners, (tvheadend Docker) and have one Windows 10 vm running for downloading youtube videos... are there any known problems? edit: and what about the i2c errors? need this to be added to the syslinux.cfg? ddbridge.msi=0

That means, I have to write to my GO-File (for every user script I have), copy xyz.sh /tmp chmod +x xyz.sh And, e.g. in the s3 Sleep Plugin where I can run userdefined scripts, I have to take the scripts which are in my /tmp? And, if I want to edit my script, I need to edit my script in "flash/config" folder, copy it again to my /tmp?

Is it possible to add a „tail -n xxx“ Option? to See only the Last 1000 lines? like in webmin logviewer... actually i have to scroll a lot of lines, or clear the log, before Open it

Is it posible to install adobe flash on this Firefox Docker? if yes, can someone tell me how, please?

Is it posible to install adobe flash on this: VNC Web Browser? if yes, can someone tell me how, please?

Hello, since a few days, I have problems with my ethernet on Unraid v6.7.2 Nov 18 17:40:19 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Down Nov 18 17:40:20 MyServer ntpd[1730]: Deleting interface #17 eth0, 192.168.0.2#123, interface stats: received=0, sent=0, dropped=0, active_time=34 secs Nov 18 17:40:22 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx Nov 18 17:40:23 MyServer ntpd[1730]: Listen normally on 18 eth0 192.168.0.2:123 Nov 18 17:40:23 MyServer ntpd[1730]: new interface(s) found: waking up resolver Nov 18 17:40:48 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Down Nov 18 17:40:50 MyServer ntpd[1730]: Deleting interface #18 eth0, 192.168.0.2#123, interface stats: received=0, sent=0, dropped=0, active_time=27 secs Nov 18 17:40:51 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx Nov 18 17:40:53 MyServer ntpd[1730]: Listen normally on 19 eth0 192.168.0.2:123 Nov 18 17:40:53 MyServer ntpd[1730]: new interface(s) found: waking up resolver Nov 18 17:41:08 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Down Nov 18 17:41:10 MyServer ntpd[1730]: Deleting interface #19 eth0, 192.168.0.2#123, interface stats: received=0, sent=0, dropped=0, active_time=17 secs Nov 18 17:41:11 MyServer kernel: r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx Nov 18 17:41:13 MyServer ntpd[1730]: Listen normally on 20 eth0 192.168.0.2:123 Nov 18 17:41:13 MyServer ntpd[1730]: new interface(s) found: waking up resolver With these messages the syslog is flooded, and every time my network connection stucks and breaks down. maybe someone can help me, I can provide more logs or Hardware informations if neccessary. Ethernet Hardware Information: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller best regards

Affects the dynamix.s3.sleep Plugin: first, I like it, and it saves a lot of energy, because my Unraid server is close to 19 hours a day in standby, and very fast ready for koi include tvheadend (within 10-15 seconds) from sleep! Better than complete power off, there my computer needs nearly two minutes... Just a few things, which would made the script better for me and my usecase (maybe and I am sure it does for others too) Can you change the main loop to: # main (continuous loop) extraDelay=$delayInit [[ $checkTCP == yes ]] && start=0 || start=-1 while [[ -f $lockfile ]]; do if [[ -z $(exclude_period) ]]; then if [[ -z $(HDD_activity) ]]; then log "All monitored HDDs are spun down" if [[ $start -eq 0 ]]; then log "Initialize TCP activity counter" start=$(txrx_bytes) else log "Check TCP/SSH/TTY/IP activity" if [[ -z $(TCP_activity) && -z $(SSH_activity) && -z $(TTY_activity) && -z $(IP_activity) ]]; then log "Communication state is idle" if [[ $extraDelay -ge 0 ]]; then log "Extra delay period running: $extraDelay minute(s)" ((extraDelay--)) fi else log "Communication activity detected. Reset timers." extraDelay=$delayInit fi [[ $start -gt 0 ]] && start=$(txrx_bytes) fi else log "Disk activity detected. Reset timers." [[ $checkTCP == yes ]] && start=0 || start=-1 extraDelay=$delayInit fi if [[ $extraDelay -lt 0 ]]; then [[ $action == sleep ]] && system_sleep || system_down log "System woken-up. Reset timers" extraDelay=$delayInit [[ $checkTCP == yes ]] && start=0 || start=-1 fi fi sleep 60 done & Because actually, after HDDs spun down detected, the timer counts, after timer is set to zero, the other checks are maid, e.g. network activity. If I change my computer from living room to the office, the script detects (after HDD spun down) that my living room computer is offline, and server goes to sleep, before I can switch on my office computer. Now I have to switch On my office computer, and when it's on, I can switch off my living room computer. If you change the behavior when countdown starts, I have x minutes time to change my computer, because countdown starts AFTER the living room computer is off, and is reset after office computer is on. I hope it's understandable what I mean. And, maybe you can explain me, why there's one division by 120 in the function TCP_activity? (line 4 in this code segment, or line 255 in the original script) TCP_activity() { result= if [[ $checkTCP == yes ]]; then delta=$((($(txrx_bytes)-$start)/120)) [[ $delta -gt $idle ]] && result=1 fi if [[ -n $result ]]; then log "Network activity on going: $(($delta*8)) b/s" echo $result fi } And, again above code segment of function TCP_activity, is it possible to change the unit from b/s to kb/s? I don't know, who has such a slow connection that he must read how many bytes are now transfered (is it in line 8 in the above code segment, or line 259 in the original script) Thank you very much Best regards Rain

Ok, thank you. I'll give it a try, after copying the rest of my data, I'll activate the plugin (but it happens too, when I'm sending the server to standby via command line) and post in the support thread there. Thank you

Hello, when I send my Unraid Server to sleep, via the webinterface Dashboard, my Server is in S3 sleep Mode. after i wake up my Server again, it makes a complete System shutdown After 3 seconds awake. i came from openmediavault and there sleep and wake up worked perfect. i did Not change any in my bios. where can i Look what i have to change to fix it? my motherboard is an MSI B250M Pro, cpu is an Intel Pentium G4560. i am using Unraid v6.7.2