I have been running into some problems with my instance recently. I noticed the parity drive had been disabled, i ran a SMART test and the drive seemed to be in a good state, so I rebuilt the parity using the same drive after verifying the SATA cables were all properly connected (which I assumed to be the problem).
This has worked okay for a couple of hours, but just now one of my data disks got disabled after a couple of read/write errors. Since this is the second time within a day, I am somewhat hesitant to just simply re-build the data disk.
I already ordered a new set of SATA cables, but maybe there is something more to it that I'm not seeing?
I can't run a SMART test at the moment since the device has dropped offline, but I have not shut the system down to check the cables once more.
Smartctl open device: /dev/sde failed: No such device
Excerpt from syslog:
Jul 26 12:17:40 VAULT kernel: md: disk2 read error, sector=13262550992
Jul 26 12:17:40 VAULT kernel: md: disk2 read error, sector=13262551000
Jul 26 12:17:40 VAULT kernel: md: disk2 read error, sector=13262551008
Jul 26 12:17:40 VAULT kernel: md: disk2 write error, sector=13262550760
Jul 26 12:17:40 VAULT kernel: md: disk2 write error, sector=13262550768
Jul 26 12:17:40 VAULT kernel: md: disk2 write error, sector=13262550776
[...]
Jul 26 12:17:53 VAULT kernel: ata6: hard resetting link
Jul 26 12:17:53 VAULT kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Jul 26 12:17:56 VAULT kernel: ata6.00: failed to IDENTIFY (I/O error, err_mask=0x100)
Jul 26 12:17:56 VAULT kernel: ata6.00: revalidation failed (errno=-5)
Jul 26 12:17:58 VAULT kernel: ata6: hard resetting link
Jul 26 12:18:01 VAULT kernel: ata6: SATA link down (SStatus 1 SControl 320)
Jul 26 12:18:01 VAULT kernel: ata6: limiting SATA link speed to 1.5 Gbps
Jul 26 12:18:01 VAULT kernel: ata6: hard resetting link
Jul 26 12:18:03 VAULT kernel: ata6: SATA link down (SStatus 1 SControl 310)
Jul 26 12:18:03 VAULT kernel: ata6.00: disable device
vault-diagnostics-20230726-1230.zip