MrMooreIOM

Members
  • Posts

    50
  • Joined

  • Last visited

Everything posted by MrMooreIOM

  1. Hey Guys, Just noticed this error and wondered where to start troubleshooting. I've followed Squids guide Here and can confirm the cache disks are not full. It seems the cache has gone into a read only mode from looking at the logs.. any suggestions on how to change this without losing data. I've downloaded and attached Diagnostics Any help/guidance would be massively appreciated Thanks in advance. unraid-diagnostics-20220426-2029.zip
  2. Anyone got any idea on this? any support would be appreciated..
  3. Hello Everyone, Firstly I'd like to say happy new year to everyone. I'm having an issue when connected where I cannot access anything from the internet. I can access my dockers and RDP to VM's etc no problem but the minute I open a chrome tab and search I receive a DNS error. I currently have my config setup to "Remote tunneled access" which from the screenshots should give me internet access. I don't believe the config to be the problem and im fairly certain this is a DNS issue. can anyone advice the DNS setup needed to give me access. currently my "Peer DNS Server" is set to the default "(Optional)" If anyone could advise It'd be hugely appreciated.. Kind Regards,
  4. Attached, apologies about this. unraid-diagnostics-20201130-1043.zip
  5. Hey Squid, thanks for your reply. I did try but couldn’t remember where to pull the full log from. could you advise? Thanks
  6. Hello All, I hope everyone is well during these times. today I noticed my Dockers & VM's were stopped so decided to reboot the system. Once the system came back online I noticed all dockers & VM's had disappeared. I've now done some further digging and noticed one of my cache drives ( I have x2 240GB SanDisk SSD's as a cache pool ) is unmountable. What is my next steps to restore my data? Ideally I don't want to be formatting my drive. so any advice or pointers in the right direction would be highly appreciated.. I've also attached my logs Kind Regards, unraid-syslog-20201129-2135.zip
  7. Hello All, So I recently made the move over from OpenVPN to WireGuard. I've got it setup so when im off LAN I can securely tunnel into my UnRAID server. I can access the likes of SabNZB, Radarr and Sonarr however when I access my UnRAID server once VPN'd in I get "cannot open the page because the server cannot be found" when using safari on my mobile. I also get a error when trying to access Plex server I get "Plex is Not reachable" I'm struggling to understand what this could be. I have PiHole running on a Pi on my LAN. I've updated the "Peer DNS Server" in Wireguard settings but still having no luck..
  8. Ahhh okay, Thanks for this info.
  9. Wouldn't this then make the VM unable to boot on next startup? I have a ubuntu VM and whenever its rebooted It reinstalls everything again causing it to use default logins etc.
  10. Hey All, Hope everyones well. I recently started using VM's on my UNRAID Build. They work flawlessly however I find when I reboot the VM's they display the attached error, and also seem to go through the OS installation again. Could anyone advise where im going wrong :) Thanks in advance.
  11. find diagnostics attached. unraid-diagnostics-20191223-2045.zip
  12. Hey All, recently noticed my cache disks are filling up and the mover doesn’t seem to clear anything up. So I’m thinking something’s been partially downloaded and got stuck on the cache disk. Do you know of any good apps to check what the largest dirs on the cache disks are. Or am I best going into terminal and checking that way
  13. Does anyone know the default username/password?
  14. Hey All, Recently installed MineOS as a docker on my Unraid server, however i dont know default username/password. I did specify the password so assuming i know that. can anyone advise the username? Thanks
  15. Hey All, Hope everyones well. I've recently rebuilt my unraid server as the previous Gen8 HP Microservers motherboard died. I've got new disks and now when trying to start the array I get the following error. "ERROR:TOO_MANY_MISSING_DISKS" is there something I can do to make unraid forget about my previous build. I would just get a new USB however my key is on this one and I've already transferred it so cant do anything without emailing support. Hope there is something in the config I can remove to make it forget my previous disks etc..
  16. I've recently done a complete rebuild of my unraid server, I moved from a HP Gen8 Microserver to a custom AMD Build. (See Build list below) https://uk.pcpartpicker.com/list/v9FrvW I'm housing this in the Fractal Design Define R6 which can house up to 10 drives, I've powered my first drive up with the SATA Power from the PSU to the drive however the cable only can supply power to 3 drives. (Image of cable i'm talking about below.) Is it possible to get one that will supply power to 5+ Drives? Ideally I dont want multiple cables running if i can get one decent one and run that instead. and advice/tips would be apprecaited.
  17. I do have the Plex Pass, I’ll have up to 5 streams at any one point. And as for endpoints these will be either mobile devices such as iPads etc or smart TV’s with the Plex app installed.
  18. I see, I was under the impression the transcoding was done by the GPU. In that case that’ll save me a fortune lol
  19. Ahhh Excellent, I’ll hold off until Black Friday and see if any of my parts go on offer. 🤞🏼 John_M mentioned above to run a 1050ti you’ll need a special version of UnRAID. Did you need to install this?
  20. Ahhh, Ace! Tbh I thought with the amount of dockers the thermals wouldnt be great. but seeing you manage makes me no longer worry lol.. I heard that plex transcoding was pretty resource intense and thought of getting a bigger case with more fans and possibly a AIO CPU cooler.
  21. Very Nice, Looks ace! What do you use your unraid server for? I originally wanted a build very similar to yours however I run my unraid server as a NAS with 5/6 Dockers (PiHole, Sonarr, Radarr, Plex, DuckDNS and Lets encrypt.) I know Plex can be abit resource greedy at times. I may rethink my spec if you're doing similar with yours. Thanks,
  22. Very Nice, Funnily enough I was looking at the exact same case, as I wanted something that looks remotely similar to the Microserver. I was scared off by thermals though. I'm curious to know how it runs? Thanks,
  23. Hello John_M, Appreciate the feedback, being honest I'd prefer my build to be as minimal hassle as possible. Do you recommend any other boards for under £150. As for the suggestions regarding the GPU. do all GPU's require a "Special version" of Unraid? As mentioned I'm looking to run the vanilla install of unraid with minimal hassel I really apprecaite the feedback and support with helping my on my first proper unraid build though... Legend 👌
  24. Apologies, Please see updated link below; https://uk.pcpartpicker.com/user/MrMooreIOM/saved/#view=2ZWq3C