Kykoibrahim
-
Posts
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Kykoibrahim
-
-
Slightly offtopic, but plex media isnt populating due to varken not writing data with error
influxdb.exceptions.InfluxDBClientError: 400: {"error":"partial write: max-series-per-database limit exceeded: (1000000) dropped=2"}
Does anyone know how to edit influx to remove the limit?
-
-
i have 4 x 1tb ssds for cache. I had them running in raid 10. On the main tab it would show usage out of 2tb but when you click into the cache pool it would show only 1tb of actual storage. I switched it from raid 10 to raid 0 and on the main tab it says 4tb but in the cache settings it shows 2tb of actual storage.
So in both configurations it looks like im missing half the storage.
-
This was resolved with the last update to the plugin.
- 1
-
-
What do you mean get a public IP not a private IP from ISP.
I dont even get to the part for the ports before it fails.
Also attached is the diagnostic files.
-
I am unable to activate the remote access feature on my server.
Ive removed the my.server plugin completely
ive signed out and signed in many times
ive deleted the 0 bit files
ive checked my dns
i dont have the preclear plugin installed.
Im not sure what else to try.
-
The restart did fix it, but this has been happening more and more often. The issue usually starts with the mongodb docker first. Then any others that get updated will act in the same way. The dockers work until updated or restarted.
-
After i updated my dockers this morning, they all became unresponisve and would not start. They were also unresponisve if i triedto restart them after the update. Ive attached the diagnostics that i took before i restarted the server.
-
Im running unraid on a dell server with 128gb of ram. Recently ive been getting out of memory errors almost nightly. I cant track down the issue.
-
And do you think that’s what’s causing the lockups and the need to restart
-
My server has been locking up a lot now. It would completely freeze and i would lose complete access from the webgui. When i try accessing the server directly i get broken links on all my dockers and all the user shares arent accessible. I am still able to see the shares but the dockers can not see them. Its gotten to the point where im almost restarting the server every day.
ray-diagnostics-20211115-1310.zip ray-diagnostics-20211113-1547.zip
-
-
5 hours ago, Kykoibrahim said:
Fixed the IPMI issue, increasing the interval and timeout time to 60s and 30s worked. Still having issues with the docker images though.
-
-
On 1/25/2021 at 3:53 AM, Monty_zoomer said:
Hi Falconexe - I've resolved found an error in the telegraf.conf file - when fixed al was sorted
Thanks for coming back
what was the error?
-
On 3/11/2021 at 2:52 PM, Squid said:
It looks like both you cache drives have a poor connection. Reseat the cabling at both ends.
i unseated both ssds and seated them agian. and im still having a lot of issues.
-
On 3/11/2021 at 2:52 PM, Squid said:
It looks like both you cache drives have a poor connection. Reseat the cabling at both ends.
i have two sata ssds attached to a pci-e card. ill reseat both of them and see. thank you.
-
On 3/9/2021 at 3:23 PM, ljm42 said:
Odd, I am not sure why Tools -> Update OS is offering you older versions, I can confirm the correct files are in place. Perhaps something in your network is caching the files, preventing you from seeing the latest. If so, the cache will likely expire if you wait a bit and try later.
Sorry i was hoping you can give me any insight to what is happening. The update did not help.
-
i was able to upgrade to 6.9.1 I am still having the issue where the dockers stops working. It is stuck on the loading and the homepage dosent display anything. Also the only way i found to fix the issue is to stop the array and start it again. Unfortunatly this for some reason also takes over an hour to do when it starts acting this way.
-
1 minute ago, Kykoibrahim said:
Hello,
Sorry i had thought that 6.9.0-rc2 was the newest release. when i look for any new updates to the os, stable or next, it shows me 6.9.0 or 6.9.0rc2 respectivily.
i will look for the link and try to 6.9.1 and see how that goes. Thank you for bringing that to my attention.
-
35 minutes ago, ljm42 said:
Is there a reason you are using an older version (6.9.0-rc2) instead of the latest version (6.9.1)? If you find a problem in an older version, the first suggestion will be to upgrade to the latest.
Hello,
Sorry i had thought that 6.9.0-rc2 was the newest release. when i look for any new updates to the os, stable or next, it shows me 6.9.0 or 6.9.0rc2 respectivily.
-
1 hour ago, Squid said:
That's a downgrade from 6.9.0 / 6.9.1
You should post your diagnostics (Tools - Diagnostics) when this happens
Sorry, i added the diagnostics now. I will add another file once it crashes again. i just rebooted so its working for now.
-
I upgraded last week to 6.9, and I’ve been having issues with docker. After a few hours it become unresponsive and slows down the whole server. Tried to upgrade to 6.9 rc2 and still having the same issue. I went back to 6.9 official. The docker works after a restart for a few hours then they all disappear from the main page and the docker app just loads and dosent go anywhere. Was hoping there’s an easy fix or something simple I screwed up during the upgrade
Ultimate UNRAID Dashboard (UUD)
in User Customizations
Posted
Reason i ask it on here is because data isnt populating in the dashboard since varken cant write to the database that the dashboard pulls from. So majority of the datapoints are blank on the dashboard.