Richamc01

Haha! This is great. I see my typo now. Thanks for the assistance with my "technical problem."

I cannot get this working for the life of me. Every time I save the docker template and check the logs, I get: grep: /etc/odoo/odoo.conf: No such file or directory When I attempt to open the webui, I see this in the logs: 2023-03-20 20:04:50,346 1 ERROR ? odoo.modules.loading: Database odoo not initialized, you can force it with `-i base` 2023-03-20 20:04:50,347 1 INFO ? odoo.modules.registry: Registry loaded in 0.178s 2023-03-20 20:04:50,350 1 ERROR odoo odoo.http: Exception during request handling. Traceback (most recent call last): File "/usr/lib/python3/dist-packages/odoo/http.py", line 1584, in _serve_db return service_model.retrying(self._serve_ir_http, self.env) File "/usr/lib/python3/dist-packages/odoo/service/model.py", line 134, in retrying result = func() File "/usr/lib/python3/dist-packages/odoo/http.py", line 1598, in _serve_ir_http ir_http = self.registry['ir.http'] File "/usr/lib/python3/dist-packages/odoo/modules/registry.py", line 190, in __getitem__ return self.models[model_name] KeyError: 'ir.http' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/odoo/http.py", line 1990, in __call__ response = request._serve_db() File "/usr/lib/python3/dist-packages/odoo/http.py", line 1590, in _serve_db exc.error_response = self.registry['ir.http']._handle_error(exc) File "/usr/lib/python3/dist-packages/odoo/modules/registry.py", line 190, in __getitem__ return self.models[model_name] KeyError: 'ir.http' 2023-03-20 20:04:50,356 1 INFO odoo werkzeug: 192.168.89.249 - - [20/Mar/2023 20:04:50] "GET / HTTP/1.1" 500 - 8 0.195 0.086 2023-03-20 20:04:50,604 1 ERROR odoo odoo.http: Exception during request handling. Traceback (most recent call last): File "/usr/lib/python3/dist-packages/odoo/http.py", line 1584, in _serve_db return service_model.retrying(self._serve_ir_http, self.env) File "/usr/lib/python3/dist-packages/odoo/service/model.py", line 134, in retrying result = func() File "/usr/lib/python3/dist-packages/odoo/http.py", line 1598, in _serve_ir_http ir_http = self.registry['ir.http'] File "/usr/lib/python3/dist-packages/odoo/modules/registry.py", line 190, in __getitem__ return self.models[model_name] KeyError: 'ir.http' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/odoo/http.py", line 1990, in __call__ response = request._serve_db() File "/usr/lib/python3/dist-packages/odoo/http.py", line 1590, in _serve_db exc.error_response = self.registry['ir.http']._handle_error(exc) File "/usr/lib/python3/dist-packages/odoo/modules/registry.py", line 190, in __getitem__ return self.models[model_name] KeyError: 'ir.http' 2023-03-20 20:04:50,605 1 INFO odoo werkzeug: 192.168.89.249 - - [20/Mar/2023 20:04:50] "GET /favicon.ico HTTP/1.1" 500 - 2 0.012 0.037 2023-03-20 20:04:56,372 1 ERROR odoo odoo.sql_db: bad query: SELECT latest_version FROM ir_module_module WHERE name='base' ERROR: relation "ir_module_module" does not exist LINE 3: FROM ir_module_module ^ 2023-03-20 20:04:56,373 1 WARNING odoo odoo.addons.base.models.ir_cron: Tried to poll an undefined table on database odoo. 2023-03-20 20:04:58,377 1 ERROR odoo odoo.sql_db: bad query: SELECT latest_version FROM ir_module_module WHERE name='base' ERROR: relation "ir_module_module" does not exist LINE 3: FROM ir_module_module ^ 2023-03-20 20:04:58,378 1 WARNING odoo odoo.addons.base.models.ir_cron: Tried to poll an undefined table on database odoo. I created a config file in the appdata folder (which is set in the docker template as /etc/odoo) and I still have the same problem. Would you mind sharing some screenshots of the setup that you were able to get working?

I'm getting the following error with my installation: I took a look at the config.php file found here: /www/nextcloud/config and I already have the "default_phone_region" set to US as seen below. 'maintenance' => false, 'defualt_phone_region' => 'US', 'theme' => '', 'loglevel' => 0, 'filesystem_check_changes' => 1, 'app_install_overwrite' => Does this also need to be set somewhere else? Or is there another variable that needs to be set in conjunction with this?

I had the same issue. This worked for me. Thank you!

Did you ever get this answered? I recently installed the docker and it would be great to be able to save to the array. When saving to the "device" or "browser" I am very confused about where it actually saves.

I am having some problems when exporting a page to PDF. The pictures are either behind the text or just do not show up at all. When I export as an HTML, the pictures show up as they should. Edit: I am on Unraid 6.8.3 and BookStack v21.08.5 Any help would be appreciated. Screenshot of the page when viewing in BookStack: Screenshot of the exported PDF with images behind the text: Screenshot of the PDF with the image not appearing: (Image should be between the large text and the smaller text)

I'm having major issues getting Nextcloud to update. I tried to update through the GUI and eventually had to restore my appdata from a backup as Nextcloud became inoperable. Now I'm trying through the CLI. Option 2 from the first page of this forum results in: Step 6 is currently in process. Please call this command later. So, I tried Option 3 (manual upgrade using occ) when I run the perform upgrade step, I am presented with: Nextcloud or one of the apps require upgrade - only a limited number of commands are available You may use your browser or the occ upgrade command to do the upgrade Setting log level to debug Turned on maintenance mode Exception: Updates between multiple major versions and downgrades are unsupported. Update failed Maintenance mode is kept active Resetting log level Then I found your post and I tried the first command you mention and I get: sudo: unknown user: abc sudo: unable to initialize policy plugin It seems way too complicated to update Nextcloud. Any idea what my options are now?

Do you remember how you fixed this? I am trying to update and I'm experiencing the exact same.

That was my thought as well. I’ll report back once I get my hands on a new battery!

I had this same thought, but I tested the battery voltage when I installed the motherboard a few months back, and it was a solid 3VDC. Would this cause the system to not boot when adding the drives though? I didn’t think it would. Either way, I’ll give this a shot. Thank you for the reply!

I am having some problems when trying to add additional storage drives. I've added drives in the past with no issues. When I built my server, I used smaller internal drives because they were inexpensive or I had them already lying around. Now, two years later, these drives are getting to be filled up. I have a 1 TB HDD and a 2 TB HDD that I am wanting to replace with larger drives. I bought two Seagate IronWolf 4TB drives to replace these, and I was wanting to connect them to my SAS expander card to run a preclear on them before swapping them. I connected a Mini SAS to SATA cable to a spare port on the SAS expander card, connected the drives to power, and powered the server back up. To my surprise, Unraid did not boot up as it normally does, so I connected to the IPMI interface and launched a console to see what was going on. When it connected, I was receiving a message that says, I powered down and double checked everything was connected properly and it was, so I booted it up again and received the same message. I rebooted again and went into the BIOS to make sure my USB was still selected as the boot device and it was. In the boot menu, I disabled all of the HDDs from being able to be used as a boot device, and made sure the only device is the Unraid USB and then saved the settings. I rebooted and received the same message. I went back into the BIOS and noticed that everything in the boot priority had changed. Now the Unraid USB wasn't showing as the only device. I changed the boot settings back to how they need to be and then rebooted again, only to receive the same message. I finally disconnected the new drives, to put everything back how it was before, and booted the server up. I went into the BIOS to make sure it was set correctly. Everything in the the boot priority menu had changed once again. I set everything back to how it needs to be (disable everything except the SanDisk USB) and rebooted. Now, without the new drives connected, Unraid boots up as it should. This was all a few days ago. Yesterday I had some free time, and I tried adding the drives again, using a different port on the SAS expander card, and I got the same message. Disconnecting the drives results in Unraid booting just fine again. Both times I tried this, the SAS expander sees the new drives. Here are some system specs: Unraid Pro Version 6.8.3 Motherboard - Supermicro X8DTL-i Dell H310 SAS HBA w/ LSI 9211-8i HP 487738-001 SAS Expander Seagate IronWolf 4TB ST4000VN008 - (drives that I'm trying to add) This might less of an Unraid issue and more an issue with Supermicro, and I plan to post on their forums as well. Any help would be greatly appreciated!

Did you ever get an answer to this? I just ran into this same issue when trying to disable the docker service.

Hello, everyone. I posted this in the specific plugin topic as well, but I'm not sure if it is related to it or not; it's just what I was tinkering with at the time. I think my problem was caused by the Dynamix system temp plugin. Motherboard: Supermicro X8DTL-6F CPU: Dual Intel Xeon X5680 Unraid version: 6.8.3 I installed this plugin almost two years ago and it worked great. About a year ago, it stopped working. I tried to re-detecting the drivers (it found one) and I was able to get the CPU temp to show, but my motherboard was now showing a negative number and I could no longer see any fan stats. Today, I tried to fix this issue. I did some Googling and I came across this article in the unraid wiki. I followed the steps in the "older versions" (at the time, I thought this meant older hardware. I now know this means older unraid version) and after completing step 7, I logged into the GUI with my phone (I did the steps before while using a monitor and keyboard connected directly to the server) and tried to load the drivers. I clicked on detect and it pulled in 5 different drivers (coretemp, i5500_temp, jc42, w83627ehf, and w83795). I clicked on save and then tried to select the sensors from the drop-down menus. While I was doing this, the page tried to load and failed. I went back to the keyboard and mouse and tried pressing enter to get a response, but the system was frozen. I reset the server using the reset button on the front of my case and let it boot. I logged into the GUI again and it froze while trying to load the dashboard. I shut down the server by holding the power button on the front of the case and then turned it back on. I logged into the GUI again and I was able to get to the settings page, and then it froze again. At this point, I shut the server back down and I pulled the flash drive. I put it into my laptop to view the most recently modified files. This is where I stand now. Can someone offer some assistance, please? I would really like to not lose all of my data. I can pull information from the flash drive and upload here if it will be helpful, but I don't know what to even upload. Since the system locks up, I cant really pull the logs either. Please help! Edit: Brief update. I decided to power up the server amd take a look in the BIOS for any leads. When I load into the BIOS, it is very slow and gets to the point where it becomes unresponsive. I am going to try and re-flash the BIOS and see what happens.

Hello, everyone. I have a problem that was caused by the system temp plugin (I think). Motherboard: Supermicro X8DTL-6F CPU: Dual Intel Xeon X5680 Unraid version: Latest stable (6.8, I think) I installed this plugin almost two years ago and it worked great. About a year ago, it stopped working. I tried to re-detecting the drivers (it found one) and I was able to get the CPU temp to show, but my motherboard was now showing a negative number and I could no longer see any fan stats. Today, I tried to fix this issue. I did some Googling and I came across this article in the unraid wiki. I followed the steps in the "older versions" (at the time, I thought this meant older hardware. I now know this means older unraid version) and after completing step 7, I logged into the GUI with my phone (I did the steps before while using a monitor and keyboard connected directly to the server) and tried to load the drivers. I clicked on detect and it pulled in 5 different drivers (coretemp, i5500_temp, jc42, w83627ehf, and w83795). I clicked on save and then tried to select the sensors from the drop-down menus. While I was doing this, the page tried to load and failed. I went back to the keyboard and mouse and tried pressing enter to get a response, but the system was frozen. I reset the server using the reset button on the front of my case and let it boot. I logged into the GUI again and it froze while trying to load the dashboard. I shut down the server by holding the power button on the front of the case and then turned it back on. I logged into the GUI again and I was able to get to the settings page, and then it froze again. At this point, I shut the server back down and I pulled the flash drive. I put it into my laptop to view the most recently modified files. This is where I stand now. Can someone offer some assistance, please? I would really like to not lose all of my data. I can pull information from the flash drive and upload here if it will be helpful, but I don't know what to even upload. Since the system locks up, I cant really pull the logs either. Please help! Edit: Brief update. I decided to power up the server amd take a look in the BIOS for any leads. When I load into the BIOS, it is very slow and gets to the point where it becomes unresponsive. I am going to try and re-flash the BIOS and see what happens.

Take a look at spaceinvader one’s YouTube channel. He’s the only reason my server is as successful as it is. Edit: to answer a little more specifically, I am using Mariadb for the database. There’s a docker for it in CA. You create the database and user manually, before installing Bookstack. Edit 2: here is a walkthrough tutorial. It’s up to you if you want to put yours behind a reverse proxy or not. https://technicalramblings.com/blog/how-to-install-bookstack-and-reverse-proxy-it-using-linuxserver-letsencrypt-on-unraid/#:~:text=Installing Bookstack,let the container start up.

Can confirm: using Method 1 would try to install Catalina. I switched to Method 2 and it is now installing Big Sur.

No problem @Janddy! Sorry for the delayed response, but I do not remember needing to modify the .env file, but I will double-check. Unless you already figured this out?

Here you go, @Janddy. This is my config file for subdomain. Just make sure that you add the CNAME in the DNS settings of your domain provider. I followed one of SpaceInvader's videos to set up a different docker behind the reverse proxy and then just kind of fumbled my way through other ones. # make sure that your dns has a cname set for bookstack and that your bookstack container is named bookstack # Ensure you have the APP_URL Environment Variable set correctly in your Docker Run/Compose or in BookStack Env File (/www/.env) # https://github.com/linuxserver/docker-bookstack#docker server { listen 443 ssl; listen [::]:443 ssl; server_name bookstack.*; include /config/nginx/ssl.conf; client_max_body_size 0; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; # enable for Authelia #include /config/nginx/authelia-server.conf; location / { #enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /ldaplogin; # enable for Authelia #include /config/nginx/authelia-location.conf; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_app bookstack; set $upstream_port 80; set $upstream_proto http; proxy_pass $upstream_proto://$upstream_app:$upstream_port; } }

I have mine working with swag and duck dns. Do you have your own domain? I can send you my working config file. Edit: I'm on mobile and Tapatalk was giving me issues with the quote inside of the quote. Gave up and deleted it. Sent from my iPhone using Tapatalk

Hello, I recently started using the NUT-InfluxDB-Exporter Docker container and it was working great up until yesterday. My Grafana dashboard stopped showing any data on the UPS. Upon looking in the logs for the container, it shows the below over and over. Also, it seems that the NUT plugin stopped working. I went to the settings to look at the settings and It showed that it was running, but it was not showing me any data. I used the "Reload" button and this did not help. I then stopped the service by setting the first option to "No" and then set it back to "Yes" to start it again. Now, even when it is set to yes, the status shows "stopped". Screenshot below. Connecting to InfluxDB host:192.168.89.5, DB:nut Connected successfully to InfluxDB Connecting to NUT host 192.168.89.5:3493 Traceback (most recent call last): File "/usr/local/lib/python3.8/site-packages/nut2.py", line 97, in _connect self._srv_handler = telnetlib.Telnet(self._host, self._port, File "/usr/local/lib/python3.8/telnetlib.py", line 218, in __init__ self.open(host, port, timeout) File "/usr/local/lib/python3.8/telnetlib.py", line 235, in open self.sock = socket.create_connection((host, port), timeout) File "/usr/local/lib/python3.8/socket.py", line 808, in create_connection raise err File "/usr/local/lib/python3.8/socket.py", line 796, in create_connection sock.connect(sa) ConnectionRefusedError: [Errno 111] Connection refused During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/src/nut-influxdb-exporter.py", line 47, in <module> ups_client = PyNUTClient(host=nut_host, port=nut_port, login=nut_username, password=nut_password, debug=(verbose == 'true')) File "/usr/local/lib/python3.8/site-packages/nut2.py", line 70, in __init__ self._connect() File "/usr/local/lib/python3.8/site-packages/nut2.py", line 112, in _connect raise PyNUTError("Socket error.") nut2.PyNUTError: Socket error. Any ideas??

Where is all of the data for bookstack saved? I believe it is saved in the database, but my mariadb saves to the appdata folder which lives on my cache drive. I am right to be concerned about high usage on my cache drive?

Thanks for the reply. Rebooting the server seemed to fix the problem for me. I didn't think to reboot as no changes were made to have caused this.

I am using PRTG to monitor my unraid machine using this plugin. About an hour ago, most of my sensors went down. I connected via SSH and ran the "snmpwalk -v2c -c public localhost" command and received "Timeout: No Response from localhost". After reading some other suggestions on this forum, I logged into the server and I was able to ping "localhost". I then ran the "curl -I http://localhost/" command and below if what I received back. Can anyone help me out with this? Nothing changed on the server, so I am a little baffled as to why it just randomly stopped working. HTTP/1.1 302 Moved Temporarily Server: nginx Date: Mon, 01 Jun 2020 19:06:17 GMT Content-Type: text/html Content-Length: 138 Connection: keep-alive Location: http://localhost/Dashboard

I completed Windows updates and I still have no mouse. I can still click on things, I just cannot see the cursor.

My mouse completely disappears after installing the Red Hat QXL controller for the display adapter. I was able to roll back the driver and get it back. Installing Windows updates now to hopefully fix this. Anyone else have this problem?