macros the black

I guess I will just give up on this and use a different docker.

Ever since the April 20, 2023 update plex is no longer working. Any in sites. I’ve attached the log. -usr-local-emhttp-webGui-scripts-run_cmd docker logs -f -n 90 binhex-plex (viki).pdf

Also you should enable the syslog server and post that after a crash.

I found allot of instants of Tower emhttpd: device /dev/sdb problem getting Id this issue often points to 3.3v being fed to the hard drive on the third pin.

We started having our server crash randomly and I couldn’t pin point it even with help from the forums. I basically ended up replacing everything but hard drives and the case.

I always say happy wife happy life if she likes the jelly fin the you may have a winner. Mine just made me spend 1200 buck to fix our plex cuz she’s addicted to plex.

So I can tell you from personal experience the the Roku and Apple TV have always been horribly slow on my personal set up. We recently bought a new tv for our bed room and it runs android tv and everything load instantly. I wanted to test this further I borrowed an nvidie shield from my brother in law and it to loaded 10 times faster then the Roku and Apple TV. I’m also running wired network.

Silly question? What client are you using.

I recently had this issue while trying to fix another issue. It came down a Sata cable not being fully plugged in.

You should check this out https://wiki.unraid.net/Check_Disk_Filesystems. Hopefully this will help.

It appears you need to update some of you dockers. Also how much memory is installed on the system and is this causing you any function errors aka is this keeping the server from running properly.

I would like to once again thank everyone for there suggestions. I ultimately ended up replacing far more then was probably needed but some of the stuff like the fans and coolers where things on my to do list any way. The ultimate culprit ended up being the cpu or the mother board. Ultimately I ended up replacing all the fans and coolers as well as the psu. I ended up with an Intel 12700k and an Asus PRIME Z690-P D4 main board. I also took the opportunity to install two 1tb m.2 nvme drives for cache and a 500gb for my Plex meta data. Thank you again for all the advice.

Everything was set up the way you suggest in your post. I’m currently running a memtest. If everything checks out on the mem test I think I’m going to bite the bullet and find a new mother board and cpu. I do want to thank everyone for there help and advice. I can’t be to upset the server has, no pun intended served me flawlessly for 5 years. As I am starting to think about 4k content running a Intel based system seems like a better route to go any way.

Ok so I’m back and forth on this issue. Just wanted to know I just realized the two new drives I just added are 7200rpm and the others are 5400rpm. One of the new drives I mounted are a second parity drive. The other is unassigned and I had planed on having it as a live spare. could the drive differential in speed be causing the issue.

ok so I will just give everyone an update on this. at this point I have all new case fans and a new cpu cooler as will as a new psu. the crashes are now acting more like crashes where the server locks up forcing me to hard restart. I'm attaching the latest syslog file as well. i jjust dont want to go down the wrong road on this as I cant seem to figure out the problem on my own. syslog

I took no action it did all of this on its own. So it powered off on its own and rebooted itself.

I come home and find that the array is stoped and the 2 new drives are at 46c with notifications about the temps. The temperature thing may have nothing to do with the unclean shutdowns but I do have new case fans on the way as the drives in question are mounted below the path of the current intake fans.

I will try that tonight thank you.

So I have happily run my unpaid server for at least 3 years. After years of trouble free operation I am now having issues with random unclean shutdowns. I recently added a second parity drive and a live spare drive. I notice after the unclean shutdown that both of the new drives are running hot 46c. Any help with this would be appreciated. Thanks in advance. viki-diagnostics-20220809-1849.zip

once in the web gui you still have to add the folders to plex. lets add movies. click on more> this will bring you into media. hover over the movies tab. you will see 3 dots click on them. go down to manage library and click on edit. this will open the edit movies window. from there select add folder and navigate to your movies folder and add it. rinse and repeat for your other media.

Squid thank you so much for your help. I thought I had done all my home work on this re purpose of my old gaming rig but I never read anything about the c states leading up to the build. Time will tell if that was the only issue. again I thank you sir and will call this a solved issue

I have not. I didn't update the bios after reading of problems with the latest bios from amd. but now that i typed that I'm realizing thats probably problems with the latest bios for the 3rd generation chips. i will have to look into how to disable c states. is there a good way to update bios without having to rebuild the unraid server? BTW loving the community application it was part of what sold me on unraid.

so my web gui stops loading after 20 to 30 hours of up time. i'm running on a asus prime 370x with a 1800x cpu. 16 gig of ram with a 256g samsung m.2 nvme. 46 tb on 5 wd red drives. i'm still in the set up phase of this build. I'm a total noob to unraid and the only way i have been able to get back up and running is a hard restart. I picked up a acp smart ups so i can more gracefully shut it down by killing power but would love to figure out how to stop this from happening.