CBMX
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by CBMX
-
-
13 hours ago, johnnie.black said:
Diags are after rebooting so can't see what caused the problem but that's not how you use xfs_repair, not against the device or you'll invalidate parity, and it's missing the partition anyway, see here:
https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui
Thanks JB
-
Also, using xfs_repair:
xfs_repair -v /dev/sde
Phase 1 - find and verify superblock...
bad primary superblock - bad magic number !!!attempting to find secondary superblock...
..found candidate secondary superblock...
unable to verify superblock, continuing...[dots, a lot of dots]
-
Yes, yes, it is strange, but it is what it is... and I dont understand why. Also I did lost my VM. And How do I know it is the VM and not the disk?, because I did it twice!!, first time i thought "Mhh... I did forget to format this disk!?", now, second time i have lost not only the disk VM and the work that was there, I will also have to spend 4 hours copying data to the disk...
1. I did create my VM (with help of Spaceinvader One's macinabox)
2. I did play around with my new machine, setting up for some work...
3. I did install a some dockers and configure them....
4. I did change the xml to passthrough an AMD RX570
5. VM starts ok, but at a point i got a read error from the server 2 disks with read errors.
6. I did re-start the machine, but this time one disk is unmountable but no errors.
7. Im here.
So the vc is
IOMMU group 19:[1002:67df] 25:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] (rev ef)
IOMMU group 20:[1002:aaf0] 25:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
affected disk is
[6:0:0:0]disk ATA ST4000DM004-2CV1 0001 /dev/sde 4.00TB
The code I did use for passthrough :
<hostdev mode='subsystem' type='pci' managed='yes'>
<driver name='vfio'/>
<source>
<address domain='0x0000' bus='0x25' slot='0x00' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/>
</hostdev>
<hostdev mode='subsystem' type='pci' managed='yes'>
<driver name='vfio'/>
<source>
<address domain='0x0000' bus='0x25' slot='0x00' function='0x1'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/>
</hostdev>**I was waiting some days before to use the biggest disk as partition (5TB) because I have some valuable info there.
What kind of help I want?, not much, if you have a way to recover the disk it will be welcomed, also if you can point out what im doing wrong so i will not screw this up again.
Thanks!!
Helpme SPACEINVADER ONE you are my only hope!
-
Hi!,
Im a newbie in Unraid so I apologize in advance if this post is not new, or correctly situated. Also, thanks in advance for the help!.
Im having problems with the video display on vms, when I start the computer the videocard is at irq 11, but when I fire up the VM it got changed to IRQ 16 and disabled, and the video wont start.
My hardware config is:
MSI z97 pcmate
i7 4790K
16Gb 2x8Gb ddr3 1600mhz.
MSI gamer gtx 970
I Know by fact (i checked on my new computer) that it shoud be painless... but is not!
So what I really want to know is:
If it is a hardware problem and I will have to change it to make it work, or it is some user error Im making.
Thanks again for the help!
JJ
lspci -v -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GM204 [GeForce GTX 970] Flags: fast devsel, IRQ 11 Memory at f6000000 (32-bit, non-prefetchable) [disabled] [size=16M] Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M] Memory at f0000000 (64-bit, prefetchable) [disabled] [size=32M] I/O ports at e000 [disabled] [size=128] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] Secondary PCI Express <?>
Message from syslogd@Tower at Oct 17 16:39:31 ... kernel:Disabling IRQ #16 lspci -v -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GM204 [GeForce GTX 970] Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [258] L1 PM Substates Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] Secondary PCI Express <?> Kernel driver in use: vfio-pci
-
Dude, you are my hero. thanks a lot!
[Support] SpaceinvaderOne - Macinabox
in Docker Containers
Posted
Help spaceinvaderone you are my only hope...
Hi, first, thank you for make vms easier to make in unraid I really appreciate your efforts.
Since im a little dumb, probably this is already answered but Im not been able to find someone with the same problem im experiencing:
I did follow your step by step guide by the letter installing bigsur. Everything goes fine until I delete the extra disks, seems something is missing in my install because I keep geting this (tried this many times)
(no gui) and then I get an err that doesnt recover
seems that im missing something at the UEFI copy thing, but im unable to figure it out.
Can you help me?
Thanks!