vobed

Thank you and everyone else form help. And if that's all then it seems to be okay for me, I think I even have this option already disabled on current machine.

Care to explain more? What could be causing crashes/freezes, or what I would need to change, as I am using it just fine in my pc, the segfault i would need to retest as when I tested it when bought, it seemed fine, then tested again and the script was showing segfaults, then after some bios patches stopped showing it again. For sure it's pre 30 week cpu.

I though about it more, and since there would be some difficulties for me to move stuff, what would you think about this: Basically, I would get myself SGC-5000-KWN2/x470/2700x for my normal work pc and then recycle my current parts - which would still leave X370 for the unRAID setup. So, the End Resulf for NAS would be: AMD Ryzen 1800X Noctua NH-D15 SE-AM4 AsRock X370 Taichi 1060 GTX 6GB SGC-5000-KWN1 Samsung nvme 250 gb for vms. I would also leave 4x Noctua NF-F12 industrialPPC-2000 PWM with fan controller. What would be bought: 2x Chieftec CBP-3141SAS 1x Chieftec CBP-2131SAS be quiet! Dark Power Pro P11 750W Samsung DDR4, 16GB, 2666MHz, CL19, ECC - M391A2K43BB1-CTD X470/2700X, new case with cooler, I would just get for my new pc, using psu/ram from old pc. Cost is not even higher and seems like I would be getting more out of it even if I consider new nvme, fans etc for new pc. I would probably consider dropping controller card and CBP-2131SAS for now. What do you think?

That's shame with the case, actually I am owning the regular version of the case and though that special edition would look similar on the inside, I'd probably could just do the swap - hopefully standard version will be released or another one will come in near future as I am not really interested in swapping all the parts inside my current case With X470 I'd would just get Taichi, it's similary priced here, I though going for more standard sata ports would be better idea. RAM- thanks for the heads up. Controller - I'd need to look for that though Amazon or something, as there is no cards with enough ports from those two in my location from what I see. Exact model recommendations would be helpful if that's not a problem for you. If I would go with X470 Taichi I would need 6 ports. Power Supply - thanks, just went for higher cert and being modular in my shop and the lowest they had was BQ 750W. Thanks for all the info!

Hello, I want to build a server in the nearish future, is the hardware listed below fully compatible with unRAID? I want to run multiple VMs, Plex, dockers, store files etc. I build it based what was available in my area. Case: Cooler Master Trooper SE (SGC-5000-KWN2) (for that 9x 5,25 slots) Motherboard: ASRock X370 Taichi HDD cases: 3x Chieftec CBP-3141SAS (at start most likely 2 cases) CPU: AMD Ryzen 2600 RAM: 2x Crucial RDIMM DDR4,16GB, 2666MHz, CL19, ECC (CT16G4RFD4266) (at start 1 module) Cooler: Noctua NH-L9x65 SE-AM4 PSU: Corsair HX850 (CP-9020138-EU) or be quiet! Dark Power Pro P11 750/850W GPU: 1060 6 GB, already have it Sata controller: Delock 89395 - will it work? *no additional fans The plan is to have (at the end): raid pool - 2 disk redudancy, 8x4TB [having 4 wd reds already, would be buying 2 more at first) - connected to CBP-3141SAS -> motherboard's sata 1-4 hdds, connected to sata controller, serving as backup, comes at later time, at start probably 1x ironwolf of 10 tb. 1 nvme 250 gb - for VMs etc 1 or 2 ssd 250/500gb for cache (or something else, not in raid) - connected to asmedia controller on motherbord Does it make any sense? Would it work well together? What I think will be probably replaces is sata controller, other ones I found that could work are 2x of its price and since I will not be using all slots instantly, I guess I could drop it for now and use discs in normal sata ports - would then changing its ports (from MOBOs ports to controllers) ruin something? Those discs would not be in raid. Thanks for any advices!