JimT

I just installed the latest version of TSDProxy and it fixes the Label Manager issue,but I still can't access my sites/

It appears that the latest version (05/10/2026) fixes the Label Manager problem.

V2 is broken for me also. I removed the tsdproxy.yaml and started tsdproxy like @Tethgar . I compared the old tsdproxy.yaml file to the newly generated one and it looks like a bunch of the settings have uppercase letters added to them. Otherwise the two files are pretty much the same. On my tailscale list of Machines, they are showing the green dot now, but I cannot connect to any of them. From tsdproxy.yaml defaultproxyprovider: default to new tsdproxy.yaml defaultProxyProvider: default There are sever others that have been updated as well targetHostname:, controlUrl:, and proxyAccessLog: and these have been added: tryDockerInternalNetwork:, and preventDuplicates: (both are set to false) Label Manager is not working correctly either, probably due to the same issue.

Everything is working again. Copying the data to a different disk and reformatting did the trick. Thanks for the help.

Passed the memtest. Was able to mount the cache and disk3 readolny. Rebooted and had the same issues. When I ran "zpool status -v" i got a few Permanent errors on both the cache and disk3:zpool.log

I am running Stable UnRaid 7.1.4 and my system is not starting up. It boots but when I tell it to start the array it doesn't want to startup. It looks like it is trying to mount the cache drives. It has been stuck with the zfs Mounting message for a couple of days. Device Identification Temp Reads Writes Errors FS Size Used Free Cache CT1000MX500SSD1_2434E988D1A5 - 1 TB (sdc) 33 °C 0.0 B/s 0.0 B/s 0 zfs Mounting Cache 2 CT1000MX500SSD1_2434E988D1A7 - 1 TB (sdg) 26 °C 0.0 B/s 0.0 B/s 0 Pool of two devices 30 °C 0.0 B/s 0.0 B/s 0 at the bottom of the page I have: Array Starting•Mounting disks... If I try and display my VMs I get "Array must be started to view Virtual Machines." and from the Docker page I get "Array must be Started to view Docker containers." None of my Shares are showing up when I click on it. The Plugins are displaying correctly. My Stats page is showing that the 3 x 4TB drives are 100% full, but from the command line (ssh conection) it shows they are at 51% 48% and 1% full. I have a 4TB Parity drive configured. If I try to start a console using the >_ button, I get colorful garbage with no way to interact with the shell. I did just replace my system memory, since the memtest86 was showing a bunch of errors. (bumped from 32Gb to 64Gb). I ran "Fix common problems" and it is showing: Errors Found Suggested Fix cache2 (CT1000MX500SSD1_2434E988D1A7) is disabled Begin Investigation Here: "Unraid Main" cache (CT1000MX500SSD1_2434E988D1A5) has file system errors () If the disk if XFS / REISERFS, stop the array, restart the Array in Maintenance mode, and run the file system checks. If the disk is BTRFS, then see this post (https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/?tab=comments#comment-543490). If the disk is listed as being unmountable, and it has data on it, whatever you do do not hit the format button. Seek assistance HERE (https://forums.unraid.net/forum/55-general-support/) My cache is setup as a ZFS file system. ZFS Master is not showing any pools. I tried running "zpool scrub cache" and it ran for multiple days without completing. I have attached the diagnostics file below. I am not sure of what to try next. I would like to keep my data drives intact. tower-diagnostics-20250630-0051.zip

I have Trillium set up on my unraid server and I want to sync my Windows machine with the unraid instance but when I run the "Test sync" on the windows machine, I get the following: Sync server handshake failed, error: Could not setup sync since local sync protocol version is 32 while remote is 26. To fix this issue, use same Trilium version on all instances. Local = Win 10 Remote = Unraid Both machines are on my home network. No proxy. Is there a way to get the unraid Trillium updated to the newer sync protocol version? Thanks

I got it figured out. Thanks

I had installed the bitwardenrs previously and eventually deleted it. I wanted to try it again so I went and watched the video and followed along. I found a couple of things: 1) the "storage" setting on the template isn't there. 2) I tried to go to the "admin" (http://XXX.XXX.XXX.XXX/#/admin ) page and it keeps returning to the normal login page (http://XXX.XXX.XXX.XXX/#/ ). Did I miss something when I deleted the previous install (which installed without any issues)? Did something change in this version of bitwarden? I did delete the appdata/letsencrypt/nginx/proxy-confs/bitwarden.subdomain.conf afterwards. Bitwarden Version 2.13.2 Unraid Version 6.8.3 Thanks JimT