wewantrice

Thanks for this plugin and apologies for what might be a simple question: I may have missed this but exactly how do you go about restoring? I tried using the backed up XML but got an NVRAM related error. Do you have to manually move the NVRAM files somewhere? Thanks

If anyone from the future stumbles upon this topic and has everything set up properly but keeps getting the message below when attempting to sign into iMessage To use iMessage with this Mac, contact Apple Support and provide the code below. Customer Code: XXXX-XXXX-XXXX Apple ID: [email protected] Your appleID is probably blacklisted. Your only choice is to call or chat with apple support and let them know you think your apple ID is blocked. It's possible you've had too many attempts under your current serial number which caused your account to be flagged. In my case I kept getting the message even after starting fresh with a new VM install/new serial number/trying a new apple ID/calling apple to unlock my old apple ID. I'm fairly certain my WAN ip address was causing the problem due to too many attempts to login. After doing a DHCP release/renew and getting a new IP address from my ISP and calling apple again to unblock my account I was able to sign into iMessage. Hope that helps someone after hours of pulling my hair out.

Trying to install the latest x5 beta as above but can't get the activation prompt to show (shows as already activated). The noavx version works fine? Not sure what I'm doing incorrectly.

Thank you for this! This allowed me to get google cast devices and Homekit working in home assistant! Is there a way to have the docker network command issued automatically on system reboot or do you do it manually each time?

Hello All, Looking to upgrade my current rig to an 8th or 9th gen processor. Could anyone recommend a good motherboard that is working with pass through for this? Was looking at z390 but apparently the IOMMU groupings are not the best.

How is that board working out for you, would you recommend it? I'm looking to run a windows VM and pass through the iGPU

Any luck with this? I'm in the exact same boat as you with home assistant, I read an old post about someone setting up avahi on a small ubuntu VM. May try that later. Edit: No luck enabling avahi in an ubuntu VM. Not sure if there's a solution. I ended up setting up the cast node in node-red to handle sending announcements to speakers around the house.

Looking to upgrade from a Haswell based system to something more recent to take advantage of Intel QuickSync for use in a Win10 VM that will run Blue Iris for surveillance, so Skylake or above if I'm not mistaken. The machine also serves as a daily driver/desktop so a mobo with outputs for 2 monitors is ideal. If anyone could chime in on known CPU Mobo combinations that would support this I'd appreciate it. Thanks in advance!

you need to run the command mentioned from a terminal window, which you should be able to launch from your unraid main page or by using ssh/telnet to login to your server.

Log attached. Pi-hole admin console is accessable at my server's IP address and show's active but no ads are being filtered. Set primary DNS on my router to point to the server. Any help is appreciated. log.txt

Can't seem to get this working. Have the docker running in host mode (won't ruin in other network modes). I can access the admin page but pihole doesn't seem to be accepting dns requests. No activity is noted in the admin page. I have dual nics on my rig so not sure if that is causing problems? Thanks for your hard work!

I'm in the same boat on 6.1.9 as well. Unistalled, re-installed and SSH damon won't start. Oddly it was working before. Any solutions? Thanks!

Thanks for the insight, I'll try to implement some changes. My motherboard has 2 networking chipsets, when I started having network errors I thought maybe switching rm the Intel to the Realtek. Will report back if any of these changes solve the issue. I just find it odd that I never experienced this issue before upgrading from a v6 beta to 6.0 and 6.01 Thanks again!

Ever since upgrading to V6 and now with 6.01 my server has been unexpectedly dropping off the network. I have tried replacing the ethernet cable and switching to a different ethernet port as my Mobo has 2 onboard. No dice. Oddly if I disconnect the cable and plug it back in the server comes back online. I've attached my syslog. No problems with any other devices connected to the same switch. Any sage advice would be much appreciated. tower-syslog-20150703-0632.zip

Recent upgrade to 6b12. Not sure when this happened but I logged in today to see a disk was redballed. Tried switching cables without any change. Syslog attached. Any help is greatly appreciated, do I need to RMA the drive? smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: W1F2YDCG LU WWN Device Id: 5 000c50 06092be56 Firmware Version: CC24 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Dec 6 14:30:24 2014 PST ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 340) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 44676600 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1809 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 35452137 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7833 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 78 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3 190 Airflow_Temperature_Cel 0x0022 058 055 045 Old_age Always - 42 (Min/Max 36/42) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 37 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 13312 194 Temperature_Celsius 0x0022 042 045 000 Old_age Always - 42 (0 9 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1179h+32m+27.462s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 16960035616 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 92818991942 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Short offline Completed without error 00% 7833 - # 2 Extended offline Aborted by host 90% 7833 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. syslog.zip

Gave it a try, still no luck

Nope no codecs or codec packs. This is a relatively clean install

Yeah I already had playready installed using the DCA Override workaround. If I maximize and minimize the WMC Window I can intermittently get like 1 second of audio but still getting the 'Display Driver Error'. WMC is so temperamental sometimes.

I've got the house wired with a mix of MOCA and AV2 powerline adapters, the HD Homerun Prime is connected directly to my router. Live TV works fine on all other HTPCs

Yeah I'm getting a "Display Driver Error" anytime I try to watch Live TV. I tried your maximize/minimize trick no dice. I'm using an HD Homerun Prime for Live TV, all of my other HTPCs in the house stream fine and an XBOX 360 pointed at the Virtualized Windows 8.1 system works fine. My suspicion is that most of my cable providers channels are now flagged copy once/DRM hence my problems displaying video. Reluctantflux what is your setup like? Are you viewing over the air streams or are you able to view cop protected channels?

Ah my fault. With my setup I am unable to view any live TV for some reason.

If you can solve this let me know. Based on this link (http://digitalmediaphile.com/index.php/2012/12/16/a-fix-for-wmc8-hdcp-hyper-v-video-display-conflict/) I do not believe Live TV will work seamlessly in a virtualized environment I am currently running 8.1 under KVM, I did find that is possible to run an Extender (in my case XBOX 360) pointed at my Windows 8.1 VM and watch Live TV that way.

Did you install the plugins listed here? I believe those are necessary with the latest beta. http://lime-technology.com/forum/index.php?topic=35136.0

Great, got it up and running. Thanks for making this!

Will this allow me to autostart the VM on boot?