neilster
Members-
Posts
11 -
Joined
-
Last visited
neilster's Achievements
Noob (1/14)
0
Reputation
-
I have been unable to run the GUI for handbrake. I can go to the relevant IP address but it shows me a code error 1006. I am wondering what i need to check to figure this out Thanks in advance!
-
@spall I didnt see this post until today!! thanks for all tip on going to check the proxy. I disable the proxy and everything started working again. I am keen on using the proxy function if possible. How do u get Sonarr/Radarr to ifnose the IP of just the download clients? Thanks, Neil
-
I was recently checking the status of my Sonarr as my Radarr as there was some issues with the downloading of the movies i was monitoring. I noticed that "all the download clients are unavailable due to failures' - (I also noticed that i have issues with my sonarr and lidarr too) i Went to check the setting and both my delugevpn and sabnzb failed on testing in the system status i noted Sabnzbd Deluge I am not sure how i can go about solving this issue, is it the sonarr or the deluge and sabnzbd? I have checked my paths and disabled SSL, I tried disabling certification validation for local addresses too I have not change any settings for quite a while, but i do have auto update on for all my docker apps. i did set up a reverse proxy previously in letencrypt but i havent moved over to swag. I have tried to but wasnt able to set it up properly. in the log files it mentions For Sabnzbd For Deluge Sonarr Version Version 2.0.0.5344 Mono Version 5.20.1.34 sry if i didnt provide enough information, not sure what is needed to troubleshoot this. mostly i follow guides from spaceinvader one when i set up so not sure why now got issues. Thanks in advanced for the help!
-
I was recently checking the status of my radarr as there was some issues with the downloading of the movies i was monitoring. I noticed that "all the download clients are unavailable due to failures' - (I also noticed that i have issues with my sonarr and lidarr too) I went to check the setting and both my delugevpn and sabnzb failed on testing in the system status i noted Sabnzbd Deluge I am not sure how i can go about solving this issue, is it the radarr or the deluge and sabnzbd? I have checked my paths and disabled SSL, I tried disabling certification validation for local addresses too I have not change any settings for quite a while, but i do have auto update on for all my docker apps. i did set up a reverse proxy previously in letencrypt but i havent moved over to swag. I have tried to but wasnt able to set it up properly. in the log files it mentions For Sabnzbd For Deluge Radarr Version 3.0.2.4552 Package Version 3.0.2.4552-ls96 by linuxserver.io sry if i didnt provide enough information, not sure what is needed to troubleshoot this. mostly i follow guides from spaceinvader one when i set up so not sure why now got issues. Thanks in advanced for the help!
-
Hey thanks for the tips! didnt have time to properly process the information you posted last week! so much happening around the world. I am keen on still doing this build but i think i will be postponing it to a later time as i think financial it is difficult during this time! i definitely will take into consideration what you mentioned. I am still keen on AMD as the cost ratio is better. i do hope to be able to work out the bugs and get a vm with passthrough working well. i hope that it just takes time and is not impossible the mother board I am still keen on this motherboard but i am waiting to hear what people think about it as they use it Thanks again for the tips! looking forward to really trying this build again in the future
-
Recommendation for a motherboard (me to community)
neilster replied to boomam's topic in Motherboards and CPUs
hey i wanted to check about this board if there is any issue with GPU pass throughs? also wondering if this can boot without GPU? i am planning to do a gaming build with some NAS capabilities i mentioned more on what i am planning to do here. -
just posting in hope that someone would help me out thanks!
-
Hey everyone! i have previously used Unraid to build a NAS at home. i am quite happy with The expand ability and customisation of Unraid. i have been thinking of building a gaming rig for a Long time that can support 1080p 120hz and for VR Gaming. Also I don’t want it to be as large as my previous builds so I was looking at a mATX build. I do also want to take into consideration that eventually I will convert this set up into a smaller NAS What I have planned so far is, it is a mix of what I have and I am planning to buy CPU: Ryzen 5 2600 or 7 2700 CPU Cooler: Arctic Freezer 33 (already have) Motherboard: ASRock X570M Pro 4 Ram: CORSAIR Vengeance LPX 16GB (2x8GB) DDR4 2666MHz PSU: CORSAIR RMx Series RM850x (2018) Case: Fractal Design Node 804 (can fit up to 10 - 3.5inch drives) Raid drive: GPU: Gigabyte RTX 2070 Super gaming Drives: Parity: 8TB IronWolf Seagate (Already Have) Cache: 2x Samsung 860 EVO SATA III 2.5 inch 500GB (Already Have) Data: 2x 8TB IronWolf Seagate (Already Have) Unassigned / VM-drive: Samsung 970 EVO NVMe M.2 SSD - 500GB I have never done a Ryzen build and I have not tried VMs yet I have been trying to read up on passthroughs and issues with Ryzen CPU with unpaid I see on the forums that there are many who have gotten it to work and what I have learnt so far is Don’t get Ryzen 3000 series (too new and a lot of troubleshooting required) Difficulty doing the VM pass through Need to get an additional GPU as there is no onboard GPU I am not sure if this mother board can boot without GPU (am planning to run unraid without the GPU) I have a few thoughts and questions on what I have planned so far - I chose x570 chipset MoBo as I want to have the option to upgrade my CPU in the future - I am thinking between 2600 and 2700 - I understand that 2600 is more then sufficient for gaming but I am not sure how to factor in that some cores are used for the unraid software - 16GB RAM I believe is enough for a regular gaming computer but again I am not sure how running a VM would change this. Was considering either 16 or 32 - I keep thinking between intel vs amd, should i just go to intel? if it seems better, though i have to relook at the price Let me know if there are any other things I should think about or should consider in my build! Just trying to figure out if I missed anything out, should I consider something else or if I should anticipate any problems for the future! Thanks in advance for the advice and thoughts!
-
Thanks! that seems to have done the trick! Not sure why i didnt think of that.
-
Hey Everyone! Sorry if i ask any dumb questions I recently got down to trying to sort out my library and trying to name it. Just came across Filebot and it seems very promising! I was able to the AMC portion to work once i bought a license but i cant seen to get the webgui to work. It just shows an empty screen and n it says server disconnected (Code: 1006) at the X I am not sure what other information to provide to give you an idea of what i can change Thanks in advance!