AinzOolGown

Members
  • Posts

    88
  • Joined

  • Last visited

Everything posted by AinzOolGown

  1. Hi ! I, too, can't run this docker properly Tried several different versions (but in 7.** flavor because wikijs only accept 6.* or 7.*) - userscript is in place and running Here's the conf: The short log from elasticsearch docker related to wikijs is joined And the error in WikiJS docker : If anyone have an idea, thank you ! DockerLog.txt
  2. Wouuhouuuuuu seems to finally work ! And recovered my long awaited prod dockers yessssss ! Thank you so so much JorgeB
  3. Ok, Firmware updated, confirmed they are in M3CR046 and in the middle of the appdata restore Finger crossed ^^
  4. Oh, so the MX500 Can be a good choice after firmware update. I'll try then. Finger crossed, it's a real pain to be unable to access prod Docker since 1 month 😭 Thanks again 🥇
  5. Hi JorgeB, Thanks to bear with me ^^ I'm thinking of changing the SSD, this time i'm searching possible unraid incompatibility for each SSD i think can be good but every model return plenty bad result... Do you have some brand/model to recommend please ?
  6. Thank you very much JorgeB I think i'm damned Snolly's post say that to view the firmware information, we need to "click on the drive's name and go to identity tab" Mine's look like this : Also, my Crucial SSDs are not listed in /dev/ maybe because Unraid can't view past the HBA card ? That doesn't make sense since it can mount them successfully
  7. To follow, i see anothers btrfs errors, after invoking mover I don't understand, SSD are new, câbles and HBA card are new too, i'm in despair Here's the fresh diagnostic tower-diagnostics-20231021-1207.zip When i deleted/redone cache pool, there was no reformating proposed or done by the system Do i need to force one ? Scrub was saying "no error found" before invoking mover
  8. Hi So, i replaced the card just now, and tried to reactivate VM, but the list is empty Maybe it is linked with the cache settings in shares I changed them, but maybe have to invoke mover ? Thanks ! P.S. I have a backup of libvirt.img EDIT : Nevermind, i replaced the libvirt.img and all VMs reappeared
  9. Hi So i received HBA Card and was wondering how to proced the cleanest way Do i scrub SSD like this (when they're still connected to RAID Controller) before replacing RAID Controller by HBA Card or : 1/ Replace RAID Controller with HBA Card 2/ Scrub SSD 3/ delete + redo Cache pool 4/ Restore Backup ? Please
  10. Hi I copied what i can Deleted the cache pool / pluged new SSDs / recreated a new cache pool and assigned the new SSDs with new cables Then i reswitched appdata on "only" cache and done a CA plugin restore Plugin said restoring complete but i have a notification saying error occured Syslog indicate a lot of btrfs error I switched to Discord somewhere inbetween, and it seems that my RAID controller card is the culprit Synd & Kilrah helped me and they advised to replace my card by a 9300-8i, so i ordered one and now i'm waiting for it to arrive and retry a CA restore Thank you JorgeB for your help and patience, when you're stressed, it's a big help to have support ! Will repost the next steps when i'll try with the new card.
  11. Sorry JorgeB, rsync gives me errors too cmd was : rsync -a /mnt/cache/appdata/ /mnt/user/Backup-Saves/TowerDockers/Cache/appdata/ I tried a CA Backup and same, it gives errors 😱 Ran a Filesystem checks on Cache, attached logs rsync errors.txt Cache filesystem check.txt
  12. Can i just copy the content via SMB and do the opposite when the new drives will be installed ? (sorry i prefer to double-check, there's some prod Dockers for my business and that would be hell to lose anything )
  13. Thanks JorgeB Here it is tower-diagnostics-20230930-1227.zip
  14. Hi So, i followed this process and changed all shares that use cache to "Yes". VM & Dockers are disabled but mover have finished and shares (appdata/system) remain on it. I opted to completely replace my cache drives/SATA Cables Can i just save the remaining content elsewhere and move it back when the new cache pool will be operationnal ? Is there a better way to move the remaining files to the array ? And, how to do this the right way ? (to conserve permissions and such) i have a Mac and PathFinder ready for that Also, i have a share set to "no" for cache, but strangely the last files created on it are on cache O_o Thank you
  15. Thanks JorgeB That reminds me... Sorry i forgot to tell you, just some days before this behavior, one disk of my array went offline 2 or 3 days. Unraid emulated it and i noticed just some hours later by chance. I changed a cable and rebuilt array. All seemed good to me, but in fact, it might have corrupted the array ? If this is it, how can i correct that please ? i read about some "scrub" command, i have it for cache array but not for data array Will it erase all cache ? I wont lose any data right ? Thank you P.S.: Installed Squid's script from your link, thanks again ! Included most recent logs, it start to worry me In the meantime, i had a notification "Error on cache pool - No description" LastLogs.txt
  16. Hi Squid, thank you Yep, i figured that and done testings when i built the server, but all the tests was successfull so i decided to keep them It's been 4 years and never had a RAM issue since. If it is really a RAM problem, then i don't understand how it can be all ok since 4 years and suddently is not ok anymore Memtest86 also tells me everything's fine 😭
  17. Hi there Since some days (i'm running solid since 4 years), my dockers stops gradually and it's very hard to make all the systems run again fine (and it shortly redo the same errors :/) When i try to restart them, unraid show an Execution Error so dead end I've searched and found some post talking about bad RAMs and i ran 2 (paralleled and unparalleled) MEMTEST86, which PASSed fine Also found ie this topic that talk about a full cache but it doesn't seem to be the case for me either, so i'm a little lost root@Tower:~# btrfs dev stats /mnt/cache [/dev/mapper/sdk1].write_io_errs 192912 [/dev/mapper/sdk1].read_io_errs 145891 [/dev/mapper/sdk1].flush_io_errs 1086 [/dev/mapper/sdk1].corruption_errs 628 [/dev/mapper/sdk1].generation_errs 0 [/dev/mapper/sdj1].write_io_errs 0 [/dev/mapper/sdj1].read_io_errs 0 [/dev/mapper/sdj1].flush_io_errs 0 [/dev/mapper/sdj1].corruption_errs 0 [/dev/mapper/sdj1].generation_errs 0 [/dev/mapper/sdl1].write_io_errs 0 [/dev/mapper/sdl1].read_io_errs 0 [/dev/mapper/sdl1].flush_io_errs 0 [/dev/mapper/sdl1].corruption_errs 0 [/dev/mapper/sdl1].generation_errs 0 I'm attaching diagnostics and some logs if anyone can point me where i can head next to fix this issue please Thank you very much in advance ! logs.txt tower-diagnostics-20230924-1631.zip
  18. Hi ! I just installed Netbox with PostGres15 and got the exact same errors&logs I don't saw any response to this post but maybe i missed it ? Do someone now how to fix this please ? Thank you very much in advance ! EDIT : So, switched to another Netbox docker repo and all's fine with this one Thanks nonetheless
  19. Hi You can actualy have access to /var/www/nextcloud by clicking on "console" in the docker's icon menu In my case, this folder's content are pretty much totally gone so i can't use these commands Edit : So, i re-thought all this and decided to let go of Nextcloud. It's been pretty much 10 years i run this and the maintenance time is just too high It broke itself too often, the DB crash, the software do what it please, in short it's not suited in production, in my case at least. At side, i also run Synology NAS for some years, both personnaly and professionnaly, and it it so much more rock solid, never had any trouble ! And it possess the same functions as Nextcloud, can do webdav, auto file-upload (pictures/videos/you name it), sharing etc, so much better choice. Goodby high maintenance time and welcome just enjoy a working synchro/server/services without doing much. Thank nonetheless for the help and good luck
  20. Hi ! Yesterday my NCP made seppuku, that is so strange 8AM, i'm heading to work like always In the middle of my way, i received notif about some connection problems. It happends from time to time if the synchro runs when i have a poor mobile network, so i just discarded it. It persisted for some hours, so i tried to connect to my Nextcloud instance via the mobile app, and it gave me "No files". Thought my server just froze so decided to wait 'till i'm home. 7PM, home, server is all good, all service running except Nextcloud and i can't connect to it (but i can connect to NCP's admin) I don't understand what's going on, i haven't changed anything in config, there was just a parity check running Bellow the logs & informations - When i click on "WebUI" in Unraid NCP docker's menu, i now have this in place of Nextcloud's login screen : - There, if i correctly understand, it tells that the last DB operation was 22 Jul at 07:34 - NCP's System Info : Do someone ever saw this ? O_o Thank you in advance P.S.: Made this morning the latest NCP docker's update but no change Already rebooted the server and tried to reinstall docker /data/nextcloud.log is empty tower-syslog-20220721-1732.zip NCP docker's log.txt NCP -data- tree.txt
  21. Hi there ! I just shuked a new WD 12Tb drive and wanted to preclear it with this new plugin First, there was no way to have the preclear option show, then i read that the disk must not contain any partition, so i deleted it by the cli. Now the little preclear icon show on unassigned partition but the preclear fail everytime And if i go on the plugin UI, it doesn't list the WD 12Tb at all P.S.: i Tried to use the wipefs -a /dev/sdl cli (for my case) but fail again Do you have any idea please ? Thank you !
  22. Hi It would be fabulous to have the "simple" option to disable a certain wireguard peer like this : https://github.com/WeeJeWel/wg-easy (just by unticking the peer line) without to delete it (actual behavior), please ! (i have Dynamix wireguard) Thank you very much