Caesar

As a small update, I came across this topic and saw this question with answer: Topic: Link to Topic question: answer: I'm currently on the VPN and I have 2 ip's: my local wifi IP as provided by my local wifo hub: Wireless lan adpater: 192.168.1.236 VPN peer-tower-wg0-8: 10.253.0.10 Based on above provided answer I have added the following to LAN_NETWORK in DelugeVPN: but still no result to get into the webgui. I start to think it is a remote access problem, but am I on the right track how to add the IP of my laptop? Next possible solution (no joy) as I try to remote access: I have added the following to my go file: As per instruction of Q2 of the VPN faq. I do doubt, Space invader adds a port in VPN manually near end of video, but if I do that I get an orphaned docker image. Is this proceeded by the 'VPN_INPUT_PORTS"?

Hi thanks for your input, I have spend last 3 hours rereading this topic and try all options, but to no avail. To recap what I have tried and done, and for example to run Sonarr (port 8989) through VPN (I have tried Radarr and SABNZB as well): 1. I have tried both binhex-DelugeVPN and binhex-PrivoxyVPN) 2. Once setup as per Spaceinvaders video I do get the VPN IP address when testing through console curl ifconfig.io (both Sonarr & Deluge/Privoxy) 3. Sonarr docker: I added to 'extra parameters': --net=container:binhex-delugevpn 4. Sonarr docker: network type: none 5. VPN docker: I added 8989 to key 13 'VPN input ports' in Deluge/Privoxy 6. VPN docker: I checked key 9 'LAN_NETWORK' and set to 192.168.178.0/24. My router provides IP's (DHCP) to 192.168.178.x where server is .25 and router .1 7. I do run from remote desktop (WAN via VPN via wireguard), all files and dockers accessible without running through Deluge/Privoxy. To be complete I opened port 8989 on my router, but no difference. 8. FYI: I do have a NAT loopback restriction: Modem doesn't support NAT loopback so Home Assistant runs DNSMasq to handle internal DNS requests 9. As stated before, I believe Sonarr works with VPN setup as I can see the load in dashboard, and confirming with curl ifconfig.io I get a VPN IP. I am just limited accessing the Webgui. As I can't access webgui through IP address (192.168.178.25:8989, https://192.168.178.25:8989 and/or http://192.168.178.25:8989) there is no point trying to add localhost to settings in Sonarr I am not sure how to run a Docker run command (what syntax do I use, I have tried a few things, nothing sensible comes out?), but if I get a hint I'll upload my log. Any idea how I can further troubleshoot and come back with more information to paint a full picture? Please find printscreens of my settings, perhaps I am thick as mince and making a very stupid mistake I fail to recognize: Sonarr prtsc 1 &2: DelugeVPN:

Just a small bump as no replies. I am still stuck on this one and keen to get it resolved. I am I really thick or have a missed the latest developments? My knowledge is not extensive enough to do proper trouble shooting by myself, but happy to spend more time on this matter with a few hints how to trace the fault to root cause.

I'm in the same boat as last 2 visitors, with no possibility I can access the webgui once a docker runs through a deluge/privoxy vpn. Running Unraid 6.11.5, tried with binhex-delugevpn & binhex-privoxyvpn. Followed all steps including the VPN_input_ports & add port for i.e. Radarr. Checking the ip through console curl ifconfig.io does confirm vpn runs and Radarr docker goes through the VPN (address of set server country in the wg0 file). I do have to make a side mark, I currently trialing & erroring through the main VPN from remote location. In other words, the buildin VPN allows me access through a wireguard setup to access the network & run internet through my home server. If I run all dockers without VPN setup I can access Web Gui and all dockers work as advertized. I also tried removing/keeping ports in the docker containers, no change. Running HTTPS also no change. I have tried same with Sonarr & SABNZB: no webgui but i.e. sabnzb keeps running on background as I can see the load on the disk so VPN does work. Keen to get it resolved, nice to know how I can run certain dockers through the VPN, but I seem to hit a wall like a few others here. Radarr Settings: Deluge_vpn (same as privoxyvpn)