SiRMarlon

Nevermind on this ... I ended up migrating over to Collabora instead.

Hey everyone, I am hoping someone can help me out. for some reason unbeknownst to me, OnlyOffice can no longer open any documents. I get a 404 Not Found Error The file itself is there, and I can download it successfully Onlyoffice web loads up just fine But I cannot open any office document in Nextcloud, the OnlyOffice settings are all correct. This was all working, and it just stopped. The logs for OnlyOffice show an error that says "No such file or directory" but as I said, I can download the file all day long and edited outside of nextcloud/onlyoffice and re-upload it which is what I have been doing. So I know the file is there. I did have my parity drive go offline because of a failure, I was able to replace it and get it rebuilt. But I don't know or understand how that would be causing this issue. All the other drives are working just fine, and nothing else on my server is broken. OnlyOffice is up to date, along with all the other dockers associated with Nextcloud. So if anyone has any suggestions on how to resolve this, I would be very grateful. As I said I've just been downloading my files, editing them, and re-uploading which is a pain.

Any ideas on this?? I still can't open documents online

I can confirm that this is now working. It would have been nice if someone on the unRAID side of things would have acknowledge the issue and let us know it was being worked on instead of having us rack our heads trying to fix the issue on the server side of things.

This is still BROKEN! Even after the latest update. Can anyone help with this?????

Hey everyone, I need some help, my onlyoffice in Nextcloud has stopped working. I recently updated my server to 7.0 and then 7.0.1. I noticed that my onlyoffice docker went missing. I re-installed OnlyOffice and was able to get it back up and running. I figured this is all I needed. But when I try to open any of my documents I get the following error in the upper right hand corner I figured maybe it just needed to be updated on the Nextcloud side of things. So I made sure the OnlyOffice connector was working And I made sure to check the app was up to date as well But like I said now it won't open any of my documents or create any new ones. When I try to create a new document I get the following error So if anyone has some insight on how to fix this it would be greatly appreciated. Not sure if I should have posted this on the Nextcloud thread but if I am in the wrong place can a Mod please move this to the correct location. Thank you!

Did you update from an older version? I was running 6.12 before but never had this featured turned on. So not sure if it ever worked. I am on 7.0.1 now

So I did the steps mentioned above but I am still not able to get flash backup to work. Anyone have any other ideas on how to get this working???

For those of you who have this issues, it cropped up on mine again. The way I fixed this was to backup my sites, and wipe and reinstall NGINX completely. Once I did that and reload my sites the error was gone.

So I got a pop up today of a CRC Error count, the count was a very low 2 I've had this drive in there for about a year with no issues. In the past I had an issue with another drive and it ended up being the SATA connector, but with the fact that this only showed 2 errors I am not sure if I should be worried or be doing something?? What do you guys think?? Got another error warning so I checked the log

So NGIX has failed a few times over the last couple of days ... same error as before I had to run the commands posted above to get NGIX to work again. Does anyone know how to get this work so we are not constantly having to do this?

Thank you for this. I woke up to my websites not working and this fixed the issue.

Was able to figure this out last night ... turns out it was the Cloudflare tunnels that seem to be the ones having issues. 🙄

Hello, Not sure what is going on with NPM, but as of today it no longer wants to work. I've had this running for over a year and have not had any issues until these past couple of days. I can no longer get ANY of my sites to connect, there are no errors in the logs for any of my dockers and they all work when accessed via the local web gui ... has anyone else been experiencing issue with NPM? Anyone know what I need to check to get this back up and running?

If anyone is curious ... I got my errors fixed. And my log has been cleared of errors for the past hour with no issues. Make sure you guys only have one ingress rule in your config.yml file Also make sure you have all your sub-domain CNAMEs setup and pointed in the right direction And verify that you have everything good to go with NPM one key thing was I switched all my certificates to the Cloudflare provided ones and moved away from LetsEncrypt. I think this might have been the key because I had a mix of LetsEncrypt certs and Cloudflare certs After I cleaned all this up the errors from my logs are gone

So did anyone ever figure out how to address this issue? My logs are getting full of these errors and I've tried everything that everyone has suggested to no avail. Everything is working and connecting just fine

In case anyone comes across this ... I believe disabling C-States solved my problems. Because I have not had anymore freezing lock up issues (knocks on wood) 🙂

Thank you good sir! Now lets see if the server freezes. If it does I hope the logs tell us why. 🤨

Hey Guys, So as the titles says, I recently upgraded my hardware. My previous build was an AMD Ryzen 7 2700x CPU on a Asrock B450 ITX Gaming Board with 32GB or RAM, my LSI Card, and a Quadro P2000. I had issues with the Quadro falling off the BUS but that was fixed by disabling C-States after that my server was SOLID and stable did not give me any problems. Since I was going to build a new desktop I decided to re-purpose my CPU and build a new server. So the new server hardware consist of a Ryzen 9 3900x mated to a Asus Prime B550 Plus (stock speeds), 32GB of RAM, same LSI card, and same Quadro P2000. I've had this new system for about a month now. And the server has frozen on me Twice ... completely unresponsive, no ping, nothing. What can I do to make sure logs are written and recoverable when this happens because I noticed that when I recover the server, the logs are empty. So I have no way to share logs with your geniuses to help me troubleshoot this issue.

Just wanted to share the new setup I just finished upgrading too this past weekend. I previously had built a 2 in 1 system using a Phanteks Enthoo Case. But I finally pulled the trigger on a Rosewill RSV-L4412U 12 Bay Hot Swap server case. Specs for the system are: Hardware: Asus Prime B550-Plus AMD Ryzen 9 3900x Twelve-Core (stock speeds) 32 GB DDR4 3600 G.Skill RipJaws V Series NVIDIA Quadro P2000 LSI SAS2008 PCI-E Fusion-MPT SAS-2 IO CREST 4 PORT SATA III PCI-E Expansion Card Upgraded all fans to Be Quiet Silent Wings 3 3x120mm 2x80mm Array: 1x WD 12TB (Parity) (Shucked) 1x WD 12TB (Shucked) 1x WD 10TB (Shucked) 4x WD 8TB (Shucked) 4x WD 4TB (Reds) Cache: 2x 500GB Samsung 860 EVO SSD in Raid 0 Unassigned Device: 1x 1TB Intel Blue M.2 NVME (Plex_AppData)

Bueller? Bueller? Bueller? 😁

I will keep that in mind!

Pulled the trigger on the Rosewill RSV-L4412U 4U Server chassis last night ... I really excited to finally move to a case with hot swappable drive bays! Just wanted to see any of you guys here are using the case and hear from your experience. Have you ran into any hiccups?

Hey guys, I am hoping to give this a try but I wanted to confirm I have this setup correctly. The instructions are a okay but not really clear. In my channels.txt list I have the following I hope this is correct. I just want videos from a single channel. And in the Args.conf I left everything alone and added the last line ... is the correct way to do it? I ONLY want to download the new season of Backstage Dodgers and not all the other seasons. Let me know if I am missing something or if I did this wrong.

Hey Fellas, I am hoping someone can help me out here. I wanted to share some large files with my brother using my NextCloud. I figured that since these files were sitting in the same array I would just copy them over to my NextCloud folder. After I copied them over with Krusader I noticed that they are not appearing on my web client. I can see them in the NextCloud folder on the server side of things but on the client side I can't see so I can't share them. Do I have to do something special here to get these files to appear?