Soulflyzz

Yea im running the Home-Assistant-Core Docker not the Linux VM version so I don't have access to the Supervisor option that the link is discussing. From My understanding that is the link for the Supervisor Docker link if you are running the VM not the Core version. *Edit Yes please move it to the correct sub-form sorry for placing it in the wrong location.

So what should be the next plan of attack? Uninstall "Spin Down SAS Drives" Plugin? Or just disable sleep on on my drives? I have the "Dynamix Cache Directories" Pugin installed so i could have my discs spin down to save life and power? If Spin Down is the issue then is there a way to get that working with mover? Actually lets leave that till I test it... I will be in contact in 24-48 hours after I test these theories. Thank you for the help "JorgeB" "trurl" and "itimpi"

Yes I have my r720 with a LSI 9201-16e card ran to my MD1200 with 2 e-sas cords. Then from e-sas to 4xsata for 8 more drives (Currently not in the array). Hope this info helps. I do have two line going from MD1200 to my r720 will do that tonight. Also I have I plan on changing my cashe drives from btrfs to xfs. I have a feeling that might also be the culprit.

I have done that as well. Right now I am trying to do my own research to correct this particular issue. Was hoping that someone who has had this similar issue can shed some light on this. Did now know asking if the issue was resolved was going to cause an issue my apologies.

This is happening to me as well. Did you ever figure out a solution?

Thank you for the assistance, before still working on this issue and have narrowed down the issue to when Mover starts. I repaired all of the drives through maintenance mode with -L. Checked parity twice 16+ hours each time with 0 errors. The moment I evoked mover all my share crashed again. any ideas, i have attached a new log. r720-diagnostics-20210629-1029.zip

Darn 24 hours and no taker.

Hello, I have just purchased a Eufy Doorbell to realize after the fact that the Docker that ties said doorbell into home assistant has not been ported to Unraid Community applications. It is a mqtt Bridge similar to DahuaVTO2MQTT project (I think from my research, I could be wrong). I was wondering if anyone can help me with that setup? I am sorry for my lack of knowledge on this project, and sorry i did not do enough research before i purchased my doorbell. docker pull matijse/eufy-ha-mqtt-bridge I have tied to copy the config from another similar product in the CA store without any luck. Please let me know if anyone is willing to assist me on this project? Thank you.

i have it plugged into a backup battery. I will power it down and try it on a different power bar and give that a try tonight. both my r720 and my MD1420 have redundant power supplies.

Hello, I have migrated from my old Unraid server to a new Dell r720 system. Through the process I just got it all live and running. After my Parity Check I had 450 errors and all my shares disappeared, all my dockers wont start up and every disk had errors in Fix Common Problems plugin. I restarted the server and everything worked fine for 24 hours till I did another Parity check and then the same thing happened. I have not had time to reboot the server to see if it came back. Is this going to be an issue moving forward? If so i have no idea how to fix this. I have attach a Diagnostic in hopes to figure out the issues r720-diagnostics-20210624-0810.zip

Hello, I know this is months later, but i have been running ha for months now and this issue started happening to me last night. Did you ever get it resolved?

Mind if I grab your final build and how its been working out for you over the last 6 months?

Hello, I have solved my own issue and want to supply the info on here in hopes this helps someone else. I added the 6.9.2 Myservers plugin, now when i try to connect to your ELECTRIC BRAIN UNRAID API i get an error 503. The solution i came up with was instead of my Unraid IP address i now use the ****************.unraid.net address and the integration fired back up. hope this helps someone moving forward.

Same thing happened to me today been working grate for days now and went to turn on my vm with HA and greyed out. Go into the Docker image and can see Details but nothing else populates. Only thing that has changed is I added a PiHole Docker image today.

hello, Did you ever get any info on this project. I am in the exact same boat and would like to see what I can put together.

I was unable to get this working and since the only use for this computer was a gaming machine, I chose to wipe the system and star over with a clean windows install. I still have Unraid running on my server and love this software. Since there was no solution is there a way to lock this thread or should I just delete this?

I have added this to the edit in the main post, The main CPU stat I am looking to monito in Riviatuner is the CPU temp

Hello, I will start by apologizing if this has been answered before but i have been scouring the Unraid forms and Redit with no luck. I have Unraid 6.9.2 running windows 20H2 fully updated. MB - MSI MPG X570 GAMING PRO CARBON WIFI (MS-7B93) Processor - AMD Ryzen 7 3800X 8-Core @ 3900 MHz I am running Dynamix System Temperature - k10temp nct6775 Updated Bios I can see the CPU info fine within the Unraid dashboard but when i try to pass it through to my windows vm to monitor them with Riviatuner, while i am playing games it will not display any of the CPU info, it will show the GPU, RAM, and network info perfectly. What i am wanting to know is this normal or is did i do something wrong or miss a step somewhere in the setup. Thank you, *Edit The main 2 I am looking for is CPU Temp and core Clock

looks like i got it i disabled the video player

This is what i get when i follow the guide on the first page

Hello, Working on a clean new install of this and when i set up my admin and SQL server the click finish it asks to update and fail. any pointers will be a great help.

Hello, I updated from Lersencyipt to swag and has been working well for quite a while for some reason i wanted to do a fresh install. I removed the swag docker and used CA remove and completely removed it before i installed the new one. After install the docker is not in the list but it is in the appdata folder. any ideas how to get it to show up? I have tried a restart with no luck. also if i try to reinstall it all it does is let me edit the config. *Update - It also auto boots and looks to be running but cannot see it in the running docker apps. *Udate - Feel like a jackass - After Clean install it pulled the Letsencrypt picture not the Swag pic. Updated the name and everything was working as expected.

IllegalArgumentException java.util.concurrent.ExecutionException: java.lang.IllegalArgumentException at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.done(Unknown Source) Caused by: java.lang.IllegalArgumentException at net.filebot.ui.rename.EpisodeListMatcher.match(Unknown Source) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(Unknown Source) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(Unknown Source) 28/09/2020 15:11:40 got closure, reason 1001 28/09/2020 15:11:40 rfbProcessClientNormalMessage: read: Connection reset by peer 28/09/2020 15:11:40 client_count: 0 28/09/2020 15:11:40 Restored X server key autorepeat to: 1 28/09/2020 15:11:40 Client 127.0.0.1 gone 28/09/2020 15:11:40 Statistics events Transmit/ RawEquiv ( saved) 28/09/2020 15:11:40 ServerCutText : 1 | 8/ 8 ( 0.0%) 28/09/2020 15:11:40 FramebufferUpdate : 179 | 0/ 0 ( 0.0%) 28/09/2020 15:11:40 LastRect : 24 | 288/ 288 ( 0.0%) 28/09/2020 15:11:40 tight : 675 | 247912/ 18019192 ( 98.6%) 28/09/2020 15:11:40 TOTALS : 879 | 248208/ 18019488 ( 98.6%) 28/09/2020 15:11:40 Statistics events Received/ RawEquiv ( saved) 28/09/2020 15:11:40 PointerEvent : 196 | 1176/ 1176 ( 0.0%) 28/09/2020 15:11:40 FramebufferUpdate : 180 | 1800/ 1800 ( 0.0%) 28/09/2020 15:11:40 SetEncodings : 1 | 52/ 52 ( 0.0%) 28/09/2020 15:11:40 SetPixelFormat : 1 | 20/ 20 ( 0.0%) 28/09/2020 15:11:40 TOTALS : 378 | 3048/ 3048 ( 0.0%) 28/09/2020 15:11:40 destroyed xdamage object: 0x20002c

I am having a similar issue. Did you get this resolved?

My system is in current failure, I have added these requests and a log file root@Laybourne:~# ls -lah /mnt/cache/libvirt /bin/ls: cannot access '/mnt/cache/libvirt': No such file or directory root@Laybourne:~# ls -lah /mnt/disk3/libvirt /bin/ls: cannot access '/mnt/disk3/libvirt': No such file or directory laybourne-diagnostics-20200827-0754.zip