no1warr1or
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by no1warr1or
-
-
Any updates on this? I posted in another thread (community apps) about this, but ive been having these issues for a bit now. It works for a few days then poof doesnt want to ping anything. dockers and VMs still work fine. running 6.12.2, but saw this on 6.12.1 and 6.11.5
-
2 hours ago, Squid said:
That's your key here.
Just weird to me that it only happens when it sits running for a week or so, fresh reboot is fine. I would assume if it was being blocked it would be blocked all the time. I initially thought that it had something to do with an improper config with the network interfaces being setup for a failover so I switched it to just eth0 since that was the only active interface. I guess I will have to turn off adblocking all together and see what happens.
2 hours ago, Squid said:Have you tried new cabling? Different ports on switch / router / modem?
The packetloss is on the WAN side, My provider just upgraded to highsplit service and theyre battling crazy interference right now.
-
ive been having the issue recently with the "appfeed failed" as well. It works perfectly for a few days after a fresh restart or if i refresh the network settings, it will pull updates and I can browse the app store but if it sits for to long it gives me this error. I also run into an issue where I cant check for unraid updates as well when the appstore stops working. It seems to me like anytime theres any kind of packet loss or down time on the wan is when I see this. I cant 100% confirm this is what causes it.
I am using the built in adblocker in unifi, but if it was outright blocking the connection i shouldnt be able to connect at all to the app store/do updates/pull new containers correct?
-
7 minutes ago, Skibo said:
Hello,
I just upgraded to 6.12.2 and I have also lost my VMs and Dockers, can somebody point me to the right direction on fixing my disappearing issues 🙂
Thank you in advance.
I want to clarify that they did not disappear but that the tab takes some time to load.
Click on the docker or vm tab and let it sit for a minute and see if they show up
-
I got my home assistant VM back running. had to fix a couple system files no big deal.
I did notice that the CPU dropped back to normal range.
Im suspecting Deluge-VPN is the culprit for that issue as it was having these issues around the time downloads and moves were happening. Odd though considering the CPU only showed 7% and ram was only a couple GB.
Anyways im going to continue with a large SMB transfer and see what happens.
-
The last couple days i noticed some performance issues with SMB on windows 11. I never looked into it..
Well today (starting on 6.12.1) i went to move some large media in the server and noticed it was also dragging. So i popped up the WebUI.. for starters docker and VM would not load, everything was still functional but wasnt loading on the webui. No problem I figured a simple restart will take care of it. When restarting i noticed on the console output it couldnt shut down gracefully so it had to force shutdown. Everything came back no issues. EXCEPT my VM for home assistant is corrupt.. i will focus on this later.
My current situation is this. Updated to 6.12.2 came back online. my CPU across most of my 12/24 cores is pegged at 100%. Docker/VM tab is intermittent. but it shows only about 10-15% CPU usage on docker and nothing CPU intensive is running on any VMs and cores not assigned to VMs are pegged at 100% as well. So im certain thats not it.
I have a dual xeon x5675 with 96GiB ram so its not apart of that intel issue (that im aware of). Any help would be appreciated. This issue is crippling my server. And im afraid to do anything with over 50TB of data here.
-
Wanted to throw in that the plugin would not stay signed in after it updated and when I went to the plugin config the page kept refreshing when trying to pull the flash backup status.
I used the above mentioned command unraid-api restart and it fixed the issue.
-
1
-
-
7 hours ago, keymaster said:
Hiya
Firstly, thank you for fantastic tutorial and guide, then sorry for whatever my failure is....I have tried and tried to get "hw" on the transcoding on plex (with pass and using binhex plexpass image) but epic failure.
I have Quadro P400 card and all seems correct but duh.... please can somebody point me to my error.
I would just like to note that your screenshot shows that it is attempting direct play on the iPhone.. as such no transcoding would happen. The audio stream to my knowledge is only transcoded on the CPU so you should never see that HW transcode..
-
1
-
-
2 minutes ago, ich777 said:
You know that I also put a screenshot of the red box (Step 3) and the text is in there, actually when you read the fist post Step 5 tells you what to do next and where to go:
Actually if you read Step 7 it tells you why you have to do this:
EDIT: Please do the first post step by step even if you don't have the red box...
I see now, so the reboot I did made that step unnecessary. I followed the rest of the steps and like I said its working great now. Thanks for the help and the drivers plugin
-
1
-
-
1 minute ago, no1warr1or said:
When I click on the logo of the plugin it takes me to a settings page but the only options there are the update options, It shows my GPU and the information related to it.
I added the lines to the plex docker and it appears to be working. Not sure what the red popup was needed for but thankfully It appears I didnt need it... unless im not understanding where that popup takes you.
-
3 minutes ago, ich777 said:
Please read the first post everything is in there, simply click on the logo from the Plugin.
Also you have to reboot or disable and reenable the Docker deamon for the Plugin to work -> why is also in the first post.
Yes because I think you haven't rebooted or restarted the Docker daemon and the Docker dissapears because it simply can't find the runtime (also if you look at the message if you click Apply in the Plex Docker template and don't click DONE you will see that the creation fails and error out because of the mentioned reason).
When I click on the logo of the plugin it takes me to a settings page but the only options there are the update options, It shows my GPU and the information related to it.
-
So I updated to 6.9 and ignorantly installed the nvidia drivers without reading this thread. I closed out of that popup believing it was just a notification on where to go to enable the device in docker. After not being able to find the setting I came here to look where to go.. So my question is how do I access that page now that the red popup box is gone. I attempted to uninstall the drivers but did not receive a prompt like the first install when installing the plugin. Also for some reason when I add the lines in the Plex docker the docker disappears, not sure if this is an unraid bug, plex bug or an issue with the settings not being enabled via that popup.
Thanks
-
I'm attempting to run the EAPcontroller but I can not get the thing to work.
I look at the logs and there are 0 errors.
When I try to visit the WebUI it says the connection was refused. Its beyond frustrating having nothing to go off of from the log.
-
Never updated this post, but I ended up switching to unraid permanently about 2 weeks after my last post lol #screwwindows. I slapped a tiny Noctua fan on the SB chip that was COOKING but not being reported by the supermicro bios or IPMI. Still not sure of the sudden temperature rise on that chip but could be airflow change in the case who knows, but its been running 24/7 without issues now. Really loving the VMs and dockers.
-
1
-
-
Just wanted to pop in and say thank you for the quick updates and information regarding their new next gen network. I woke up to find Deluge completely unresponsive, which I was expecting at some point after seeing their news page a couple weeks back about the legacy networks. Simply downloaded the new opvn config, dropped it in and was back up and running in 5 minutes.
-
Thank you for the input. I was to anxious and frustrated last night and mistook my own error for one with unraid. I ended up switching (for now) to windows until i start my new unraid build. The server shut off as well within windows, and from what I can tell the southbridge chip was getting to hot with the graphics card being run at all, Likely due to all the hard drives I just put on the integrated SATA controller AND a change with the fan layout in my 4u chassis. I am exited for a new build with unraid.
-
I'm new to unraid as of today, and new to the forums as well...
I installed unraid to run as my main server with some VMs inside for windows 10, and this is where the problems being, To the point I'm almost to the point of regretting purchasing a key, and wasting the time. anyways
I've spent the better part of today messing with the configurations, setting up the windows 10 VM and getting it going.
Here's the issue i'm running into. The server deadstops, powers off without any warnings OTHER than the system fans kicking up some for about 10ish minutes before it cuts out. The system log reveals a ERROR at the time of the dead power off to the effect of IPMI Error clearing flags: cc ( i will try to grab the exact error line)
This only happens when I have my GTX1660 passed through, if i have the VNC graphics selected it runs just fine.. Now some background on that, I was having some issues with iommu not passing through all the devices in the group (all devices were part of the nvidia card) so I followed a guide that added a vfio-pci.ids= line into the configuration, with all the hardware addresses.
Any help would be appreciated, im sure im leaving a lot of details out, im pulling my hair out. Really about to switch back to windows 10 storage spaces
unRAID server having severe DNS issues
in General Support
Posted
Wanted to update everyone.. I believe the issue is resolved. Changes since my last post.. Updated to 6.12.3, set my IP as static in the network settings and manually set my DNS to cloudflare.