ToddCat
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Posts posted by ToddCat
-
-
1 hour ago, rachid596 said:
Hello
Try thisThanks for that link! IT helped.
One other thing I noticed for anyone else that stumbles upon this thread,
My old plex server had Container Path: /Media
The binhex on has Container Path: /media'
I simple had to change to an upper case M. Such a small detail, but that's what threw it off, everything is working now!
-
So after reading that using binhex's plex container might help solve my issue of the official plex container continuously writing to the disks. So I added binhex's plex and set the configs to my old plex configs. When I launch Binhex's plex, it starts the new server wizard.
I would like to transfer my library and data over so I don't have to remake the library and set everything back up. What is the correct way to go about doing this?
Thanks!
-
Ok so for anyone else facing this issue, I am not 100% on how I fixed it, but I reset my network adaptor settings and enabled vlans and restarted.
-
1 hour ago, alturismo said:
may take a look at extra parameters
--cap-add=NET_ADMIN --device /dev/net/tun --sysctl net.ipv6.conf.all.disable_ipv6=0
if this is there ...
Thank you for the reply, yes that is exactly what is already there.
-
Following this guide: https://forums.unraid.net/topic/89649-683-use-network-from-vpn-docker/
I am trying to set up the docker container OVPN_Privoxy, what should I be using for the Network type and LOCAL_NET values?
When I use br0 or bridge I get: ERROR: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)
it works fine on host for networking mode, but I don't want all the containers to use the vpn, just select ones.
-
Alright, I set up a syslog server on another pc, The server did a hard reset on its own, just crashed and rebooted, no stack trace, no errors. Nothing in the syslog near the time. Reset at 11:24, last entry from 11:07 and its just info nothing helpful. Any advice on how to track down whats causing this?
-
26 minutes ago, trurl said:
Ok all steps listed are done.
I am guessing it will continue to run fine in safe mode. It usually runs fine in normal mode if I just leave it and dont log in or run any dockers. Its when I start using the server that it crashes.
-
I do not yet.
Diagnostics attached, Safe mode (in which I guess docker still runs) and array started.
-
Currently in safe mode, and here is the diagnostics from the tools tab.
-
Hello,
My server has been crashing and I would appreciate help with diagnosing it. I've noticed it crashes more often during copying, or working with docker containers. So I replaced the sata cables (brand new) and it let me copy TBs of files with no issues. The next day it crashed again. Sometimes it just straight up randomly hard reboots, no stacktrace, no error nothing. Most of the time when I go to check on it, there is a stack trace on the screen, but never any errors in the log at the time of the crash.
Things I have done so far:
I tried mirroring the syslog to flash, and even through several crashes, nothing is captured in the log at the time of the crash..
Running the built in memtest (that comes with Unraid) for 24 hours - no reported issues
Ran a separate memtest (newest version) from a separate usb, one ram stick at a time until completion (about >4 ish hours each)
Tired different network cables, different nics on the server, and connecting to a different network switch.
Today, I got a new USB, and downloaded a fresh copy (6.8.0) to it, using the unraid tool. From a different pc. - same problems
Please let me know what I should try.
Specs:
CPU - Intel Xeon E3-1270 V2 CPU
Mainboard - Supermicro X9SCM-F
Ram - Kingston 32GB (4x8GB) 240-Pin DDR3 1600 ECC SERVER Unbuffered Memory
PSU - Corsair CX 600
Samsung ssds and wd drives (all new and precleared)
[Support] binhex - MineOS-node
in Docker Containers
Posted
Thank you for making this! I was hoping you would. The other mineos image throws a lot of errors for me