ONEILL
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by ONEILL
-
-
anyone got any ideias ?? , how can i fix this wrong report ??
-
The bios temps
-
Its not F , its always Celsius , but its the wrong number , since its low on the bios , and was low before the update , after it its always 80 up for more , even if idling , so the problem must be drivers or wrong sensor data , but i dont see F , only see celsius
should i try a reboot ??
-
Sorry , but i checked that its celcius
-
Hi guys , i made the upgrade to the RC2 , due to my nvidia not working , its fine now , all good , but now i have another issue that i didnt had with 6.8.5 , my cpu temp is wrong says its on 96º and already saw a 110º , checked bios temp , and its fine on the 40 ish º , i have a threadripper , with and aorus board , and it shows the driver as : it87 k10temp , have unloaded it and rescan , and tried in ssh to check sensors , but cannot get the temp right , how can i fix this ??
Thank s
-
ok , iv changed the usb flash , and the problem so far has not occured anymore , will wait a bit more , but just to let you all know , and thank you for all your help !!!
-
ok will boot in safe mode , and see if it happens again !!!
-
Cannot do anything , its stuck here .... just shutdown .... and has to be a forced one .. on the button ... it doesnt run the shutdown in the webui
-
it just happend again :
Warning: exec(): Unable to fork [pgrep 'dockerd'] in /usr/local/emhttp/plugins/dynamix/include/Helpers.php on line 190
Warning: exec(): Unable to fork [pgrep 'libvirtd'] in /usr/local/emhttp/plugins/dynamix/include/Helpers.php on line 190
Warning: exec(): Unable to fork [pgrep -cf /sbin/btrfs] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 68
Warning: exec(): Unable to fork [cat /sys/devices/system/cpu/*/topology/thread_siblings_list|sort -nu] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 94
Warning: exec(): Unable to fork [sensors -uA 2>/dev/null|grep -c 'fan[0-9]_input'] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 100
Warning: shell_exec(): Unable to execute 'dmidecode -qt2' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt0' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt4' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: exec(): Unable to fork [awk '/^MemTotal/{print $2*1024}' /proc/meminfo] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 132
Warning: exec(): Unable to fork [ls /sys/class/net|grep -Po '^(lo|(bond|eth)\d+)$'] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 133
Warning: shell_exec(): Unable to execute 'dmidecode -qt17' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt16' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15 -
no im not shutdown down every day ..... i have to do that because of this problem , if i dont restart i cannot do anything ... and vms are down , and dockers go crazy ... i dont want to shut it down !!!
so far after the chsdks it has not happend yet .... lets hope it fixed some error in the file system
-
Hello @Frank1940 , thanks for the help , yes the usb is in a 2.0 , already tried that , changing the port when the problems started no luck.......
i have run chkdsk , it says that it has corrected errors , since i had to shutdown to take out the usb .... ill post if it comes back ...
-
hello , after my usb disk died , i changed to a sandisk cruiser , and after a few days , unraid everyday starts with a lot of unresponsive problems , webui gives error in all the areas , unable to fork ... with erros from every plugin , and the terminal gets :
Linux 4.19.107-Unraid.
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: Resource temporarily unavailable
-bash-5.0# ls
dead.letter mdcmd
-bash-5.0# lsthe errors in webui are like this :
Warning: exec(): Unable to fork [pgrep 'dockerd'] in /usr/local/emhttp/plugins/dynamix/include/Helpers.php on line 190
Warning: exec(): Unable to fork [pgrep 'libvirtd'] in /usr/local/emhttp/plugins/dynamix/include/Helpers.php on line 190
Warning: exec(): Unable to fork [pgrep -cf /sbin/btrfs] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 68
Warning: exec(): Unable to fork [cat /sys/devices/system/cpu/*/topology/thread_siblings_list|sort -nu] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 94
Warning: exec(): Unable to fork [sensors -uA 2>/dev/null|grep -c 'fan[0-9]_input'] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 100
Warning: shell_exec(): Unable to execute 'dmidecode -qt2' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt0' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt4' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: exec(): Unable to fork [awk '/^MemTotal/{print $2*1024}' /proc/meminfo] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 132
Warning: exec(): Unable to fork [ls /sys/class/net|grep -Po '^(lo|(bond|eth)\d+)$'] in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 133
Warning: shell_exec(): Unable to execute 'dmidecode -qt17' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15
Warning: shell_exec(): Unable to execute 'dmidecode -qt16' in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(521) : eval()'d code on line 15This started a few day after i changed to a 2nd flash drive .... also have this in flash
May 16 20:55:43 SKYNET kernel: sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
May 16 20:55:43 SKYNET kernel: sd 0:0:0:0: [sda] Write Protect is off
May 16 20:55:43 SKYNET kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
May 16 20:55:43 SKYNET kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 16 20:55:43 SKYNET kernel: sda: sda1
May 16 20:55:43 SKYNET kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] physical block alignment offset: 4096
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] 4096-byte physical blocks
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] Write Protect is off
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] Mode Sense: 7f 00 00 08
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 16 20:55:43 SKYNET kernel: sdaa: sdaa1
May 16 20:55:43 SKYNET kernel: sd 9:0:6:0: [sdaa] Attached SCSI disk
May 16 20:56:39 SKYNET emhttpd: ST10000VN0004-1ZD101_ZA24WKE3 (sdaa) 512 19532873728
May 16 20:56:39 SKYNET emhttpd: SanDisk_Ultra_USB_3.0_4C530001100716120183-0:0 (sda) 512 60063744
May 16 20:56:39 SKYNET kernel: mdcmd (3): import 2 sdaa 64 9766436812 0 ST10000VN0004-1ZD101_ZA24WKE3
May 16 20:56:39 SKYNET kernel: md: import disk2: (sdaa) ST10000VN0004-1ZD101_ZA24WKE3 size: 9766436812
May 16 20:56:39 SKYNET emhttpd: import flash device: sda
May 17 19:10:07 SKYNET emhttpd: error: get_temperature, 4156: Cannot allocate memory (12): popen: /usr/sbin/smartctl -n standby -A /dev/sdaaI cannot do anything after and start anything , only if i reboot and it only lasts like a few hours than its back to this state
char device redirected to /dev/pts/0 (label charserial0)
qemu: qemu_thread_create: Resource temporarily unavailable
2020-05-17 20:59:39.438+0000: shutting down, reason=crashedcan i get some help and opinions , do i need to change the usb again ?? i have to post first here before contacting support
-
@Endythank you very much for you help ... going to do the same as you ...
-
Hello all , just arrived here , this is a great comunity hope to learn a lot here .....
in that learning ... im thinking of upgrading from my synology nas ... to a supermicro ... have been seeing a few Supermicro SuperChassis CSE-848 X9QRI-F+ . to start ... but have a few questions and fears ..... would like some help just so i do not waste money since i dont have tons of it
,
My main goal , is have a NAS with capability to expande .. so far i have my 12 bay synology filled with 10tb drives with raid 6 ... i used it for mainly Plex server ( sharing with 5 or 6 family members ) and docker containers (radarr , sonarr , ombi ,netdata etx etx) , and maybe 1 or 2 vms ... i have a lot of 4tb drives arround .. and thats why i was checking the supermicro with 24 bays so i can put them in the supermicro , and expand the drives i have now .. even if its not the best to mix 10tb with 4tb .. it will give me time to have more money and starting switching the 4´s wit bigger drives ....
i have seen a few builds with supermicro and unraid ... but my questions for you guys that already have a lot of supermicros ... is ....
1 -- can i use other motherbords in the supermicro case , like only buy the case and drive arrays and stick a motherboard and cpu i have ??
2 -- if i can use a motherboard i have , can i connect all the 24 drives using the sata in the board and maybe like a expandable pci board to connect the rest of the satas , and will it work with unraid ??
3 -- if i cannot use a custom board and have to use the supermicro board , or it is a lot better to use the supermicro board , can it run a nvidia p2000 for plex transcoding ??
sorry if this is a comon problem .. sorry for the trouble , hope you guys can give me a few pointers in with direction to go .....
Thanks and happy hollidays and new year
,
Wrong Cpu Temp After Upgrade RC2
in General Support
Posted
Thank you for your feedback, hope it gets fixed.