Unraid 6.9.0-rc1 - CPU TEMP NCT6687 Linux Driver Support


Recommended Posts

Hope you can help with mine as well? I thought this would be working in 6.9.0?

 

M/B: ASRock B450 Pro4 Version -

BIOS: American Megatrends Inc. Version P4.10. Dated: 03/05/2020

CPU: AMD Ryzen 5 3600 6-Core @ 3600 MHz

 

image.png.8f91a37a59f364a2f224b45243cfa62b.png

 

sensors
nct6779-isa-0290
Adapter: ISA adapter
Vcore:         0.00 V  (min =  +0.00 V, max =  +1.74 V)
in1:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
AVCC:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
+3.3V:         0.00 V  (min =  +0.00 V, max =  +0.00 V)
in4:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
in5:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
in6:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
3VSB:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
Vbat:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
in9:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
in10:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
in11:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
in12:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
in13:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
in14:          0.00 V  (min =  +0.00 V, max =  +0.00 V)
Array Fan:   2872 RPM  (min =    0 RPM)
Array Fan:   2445 RPM  (min =    0 RPM)
Array Fan:   2106 RPM  (min =    0 RPM)
Array Fan:   3020 RPM  (min =    0 RPM)
CPU Temp:     +52.5°C  
intrusion0:  ALARM
intrusion1:  ALARM
beep_enable: disabled

 

sensors-detect
# sensors-detect version 3.6.0
# Board: ASRock B450 Pro4
# Kernel: 5.10.19-Unraid x86_64
# Processor: AMD Ryzen 5 3600 6-Core Processor (23/113/0)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): 
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           Success!
    (driver `k10temp')
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Hygon Family 18h thermal sensors...                         No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT5532D/NCT6779D Super IO Sensors'          Success!
    (address 0x290, driver `nct6775')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): 
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): YES
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): 
Using driver `i2c-piix4' for device 0000:00:14.0: AMD KERNCZ SMBus
Module i2c-dev loaded successfully.

Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x4f
Probing for `National Semiconductor LM75'...                No
Probing for `National Semiconductor LM75A'...               No
Probing for `Dallas Semiconductor DS75'...                  No
Probing for `Maxim MAX6642'...                              No
Probing for `Texas Instruments TMP421'...                   No
Probing for `Texas Instruments TMP422'...                   No
Probing for `Texas Instruments TMP435'...                   No
Probing for `Texas Instruments TMP441'...                   No
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
Probing for `NXP/Philips SA56004'...                        No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: NVIDIA i2c adapter 4 at a:00.0 (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes
Adapter cannot be probed, skipping.
Next adapter: NVIDIA i2c adapter 6 at a:00.0 (i2c-4)
Do you want to scan it? (yes/NO/selectively): yes
Adapter cannot be probed, skipping.
Next adapter: NVIDIA i2c adapter 7 at a:00.0 (i2c-5)
Do you want to scan it? (yes/NO/selectively): yes
Adapter cannot be probed, skipping.
Next adapter: NVIDIA i2c adapter 8 at a:00.0 (i2c-6)
Do you want to scan it? (yes/NO/selectively): yes
Adapter cannot be probed, skipping.

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `k10temp':
  * Chip `AMD Family 17h thermal sensors' (confidence: 9)

Driver `nct6775':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT5532D/NCT6779D Super IO Sensors' (confidence: 9)

 

Link to comment

Hi ich777 im using the Nuvoton NCT6681D/6682D eSIO would you be able to create a plugin that support this sensors?

 

root@TS-S30:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
MB Temp:      +43.0°C  (high = +76.0°C, crit = +92.0°C)
CPU Temp:     +37.0°C  (high = +76.0°C, crit = +92.0°C)
Core 1:       +43.0°C  (high = +76.0°C, crit = +92.0°C)
Core 2:       +41.0°C  (high = +76.0°C, crit = +92.0°C)
Core 3:       +37.0°C  (high = +76.0°C, crit = +92.0°C)
Core 4:       +42.0°C  (high = +76.0°C, crit = +92.0°C)
Core 5:       +42.0°C  (high = +76.0°C, crit = +92.0°C)
Core 8:       +41.0°C  (high = +76.0°C, crit = +92.0°C)
Core 9:       +42.0°C  (high = +76.0°C, crit = +92.0°C)
Core 10:      +40.0°C  (high = +76.0°C, crit = +92.0°C)
Core 11:      +42.0°C  (high = +76.0°C, crit = +92.0°C)
Core 12:      +35.0°C  (high = +76.0°C, crit = +92.0°C)
Core 13:      +35.0°C  (high = +76.0°C, crit = +92.0°C)

root@TS-S30:~# sensors-detect
# sensors-detect version 3.6.0
# System: LENOVO 43517J2 [ThinkStation S30]
# Board: LENOVO LENOVO
# Kernel: 5.10.19-Unraid x86_64
# Processor: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz (6/62/4)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): yes
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Hygon Family 18h thermal sensors...                         No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT6681D/NCT6682D eSIO'                      Success!
    (address 0xa00, driver `to-be-written')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):

Link to comment
  • 1 month later...

Managed to get temps on my Strix B550-E with acpi_enforce_resources=lax in my boot options, otherwise I get nothing but CPU temps. But the SYSTIN temp that seems to relate to motherboard temps goes up to 80-90C and won't come down even at idle which I know is not correct as it goes back down after a restart and is okay for a while, it also isn't showing anywhere near that in the BIOS. Is this because of the boot argument?

Edited by cobhc
Link to comment
  • 3 weeks later...
On 4/14/2021 at 1:55 PM, cobhc said:

Managed to get temps on my Strix B550-E with acpi_enforce_resources=lax in my boot options, otherwise I get nothing but COU temps. But the SYSTIN temp that seems to relate to motherboard temps goes up to 80-90C and won't come down even at idle which I know is not correct as it goes back down after a restart and is okay for a while, it also isn't showing anywhere near that in the BIOS. Is this because of the boot argument?

Did you get any clarity on this? I have the same mobo with the same issue.

Link to comment
  • 7 months later...
  • 8 months later...
  • 1 year later...

Hello there,

I know its quite old topic, but I'd like to ask you for help with my problem.

My CPU and additonal fan keeps running on full speed.

I cant do anything about it. I've installed:

 

1. image.thumb.png.5085ccb51097895d163425bb797aa880.png

 

2. image.thumb.png.9a1fdec5fa6e3bc3dc5747abf6550207.png

 

3. image.thumb.png.f3b24a2edd6ea7e58bd9012d8d2e56ea.png

 

but nothing seems to work to have control on speed of those fans.

 

Is there any way I can configure it? Any help would be much appreciated.

Ohh btw. thats my unraid server setup: 

 

image.png.c9887183d9861580b0a7f43e581e7bcc.png

Edited by rogales
Link to comment
8 hours ago, rogales said:

Ohh btw. thats my unraid server setup: 

This is to little information, please post your Diagnostics.

 

I also think that your Dell PowerEdge T30 (this is the only real hardware information which I can see from your screenshot) has a IPMI interface and you should look into that first to control your fans since I don't think that this system is controllable like a consumer system.

 

Can't help much with server hardware because I don't have hardware on hand to test and I also don't like these locked down systems (especially Dell, HP,...).

Link to comment
Just now, rogales said:

Here is my diagnostics file.

Have you yet looked into your IPMI?

There are also plugins for that in the CA App, but as said I can't help with that because I don't have such hardware.

 

As said above server hardware work most of the times differently than consumer hardware.

 

I don't see any indication that you have a NCT chip on your motherboard, so to speak, you should open up your own thread for that, however you should really look into IPMI and what you can do with it <- as said I can't help with that because I don't have such hardware and even don't know how to use it.

Link to comment
  • 4 weeks later...

Hello Everybody, 

I´ve also a little stuck with a System Temp and Auto Fan Control on a B550 Taichi from Asrock. Maybe someone has already done it with this bord. The Problem is that the Fans are not shown in the “System temp” Plugin also not the NCT 6775. I think the Driver is a problem

 

 

What I’ve done until now.

reinstalled the System Temp Plugin (alot)

reinstall Nerd Pack 

tipped Sensor Detect in the console and added the sensors with Mudprobe in the go file

changed Bios fan settings to every possible setting

Installed the Nuvoton NCT 6687 Driver pack

Added "append initrd=/bzroot acpi_enforce_resources=lax" in the start sequenz of the flash drive

Ask in the German forum 

 

 

Googled a lot.

Attempt this workaround

 

asked in the Dynamx support Forum

 

 

And now here.

 

Would be nice, if someone has some advice and could help me. I´m realy out of ideas. 

 

 

 

 

 

sensors.txt sensors-detect.txt

Link to comment
5 minutes ago, Tidus1307 said:

Hello Everybody, 

I´ve also a little stuck with a System Temp and Auto Fan Control on a B550 Taichi from Asrock. Maybe someone has already done it with this bord. The Problem is that the Fans are not shown in the “System temp” Plugin also not the NCT 6775. I think the Driver is a problem

 

 

What I’ve done until now.

reinstalled the System Temp Plugin (alot)

reinstall Nerd Pack 

tipped Sensor Detect in the console and added the sensors with Mudprobe in the go file

changed Bios fan settings to every possible setting

Installed the Nuvoton NCT 6687 Driver pack

Added "append initrd=/bzroot acpi_enforce_resources=lax" in the start sequenz of the flash drive

Ask in the German forum 

 

 

Googled a lot.

Attempt this workaround

 

asked in the Dynamx support Forum

 

 

And now here.

 

Would be nice, if someone has some advice and could help me. I´m realy out of ideas. 

 

 

 

 

 

sensors.txt 2.33 kB · 0 downloads sensors-detect.txt 10.64 kB · 0 downloads

got it running. done a bios downgrade at the same time. That was the issue. newer than 1,9 wasn´t working with the bord

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.