Hi.

 

I'm trying to build a new Unraid server as a replacement for my existing unraid server which is showing it's age! 

 

I went with a i5-10400 CPU on a ASUS TUF Gaming B-460M-Plus motherboard.

Issue - On booting into Unraid I see the message ipv4 address not set and ipv6 address not set.   I tried deleting the network.cfg file and rebooted and still get the same issue.

 

The machine is connected via ethernet to a Eero mesh-router node.

 

Diagnostics are attached. I have also attached output from ifconfig -a (from the command line) as well.  You will see SATA issues in the logs as well since no drives have been installed in the server yet.

 

NOTE: The same machine when booted into Windows connects to the network properly, so the cable / connections seem to be fine.

 

Can anyone take a look at the what the issue could be. 

 

Thanks!

 

ifconfig.txt homevault-diagnostics-20201216-0754.zip

Edited December 16, 20205 yr by WorriedAboutDataLoss
solved

You need v6.9.rc1 for the NIC on that board to be supported.

Thank you! Thank you! Thank you!

 

That did it and I'm all set now!