No HDD temps after installing 6.9.0-rc1


MCT

Recommended Posts

1 hour ago, itimpi said:

Have you tried spinning the drives up first?  It is expected to get * in that column if the drives are currently spun down.

Yes all drives are spun up. I've been watching these temps for 2 days as it's hot here. Has never showed anything except disk 4 and cache since updating. Which may or may not be the issue, but I do watch temps regulary

array spun up.PNG

Edited by MCT
added photo
Link to comment

I have the same problem! anyone figured out a way to fix this?

 

I've tried smartctl '-A /dev/sdX' and i get a message back telling me smart status is enabled.. however when i go into the hdd settings it tells me this:

 

SMART support:Available - device has SMART capability.

SMART support:Disabled

 

Very confused!

Link to comment

You should see something like this from smartctl

 

root@Tower:~# smartctl -A /dev/sdl
smartctl 7.2 2020-12-06 r5127 [x86_64-linux-5.9.13-Unraid] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   006    Pre-fail  Always       -       31106221
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2679
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       319821469
  9 Power_On_Hours          0x0032   099   011   000    Old_age   Always       -       953
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       21
 12 Power_Cycle_Count       0x0032   098   037   020    Old_age   Always       -       2334
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       4
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       6820
190 Airflow_Temperature_Cel 0x0022   073   046   045    Old_age   Always       -       27 (Min/Max 26/28)
194 Temperature_Celsius     0x0022   027   054   000    Old_age   Always       -       27 (0 13 0 0 0)
195 Hardware_ECC_Recovered  0x001a   052   045   000    Old_age   Always       -       31106221
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1

root@Tower:~# smartctl -A /dev/sdi
smartctl 7.2 2020-12-06 r5127 [x86_64-linux-5.9.13-Unraid] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     30 C
Drive Trip Temperature:        68 C

Accumulated power on time, hours:minutes 41986:57
Manufactured in week 37 of year 2014
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  323
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  2035
Elements in grown defect list: 0

root@Tower:~# 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.