December 19, 20205 yr Hi, After viewing hours of Spaceinvader content... I still cannot get my graphics cards to work. The only thing that seems to work is VNC.. I have 2 graphic cards in my HP Z840, a NVIDIA Grid K1 (with 4 GPUs) and a separate NVIDIA Quadro M2000. None of these seem to work in a VM. The Quadro is connected to a monitor on port 1, when the system starts I can see the Unraid console output. But when I start the VM that should use the card, all goed to blank, nothing happens. Obviously I cannot install in this mode, but also swapping an existing vdisk has the same result. The Grid should be used in VMs for remote work only. Win 10 VMS work fine, detect the card but report error 43, so the thing is not working. Hyper-V swithed off, I downloaded ROMs and patched them. The GPUs are in separate IOMMU groups, Removing either of the cards has no effect, but of course I want both of them to be in there. Have no clue what my next move should be...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.