December 27, 20205 yr I'm pretty new to the unraid world. I set up my nas earlier in the month, ASUS b550m-plus, Ryzen 3600, Gskill ddr4 3600, NVidia rtx4000, intel p3600 cache SSD, and a lsi-9207-8i. I am currently running unraid 6.9.0-rc1. my issue is that I have 4 Seagate 8tb ironwolfs that have been installed onto my mobo, and just installed 4 more Seagate Exos 10tb, but when the hba and the hdds together my nas no longer sees any of the hdds on the system, but when I go to system devices it sees an attached scsi contoller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev05). my question is what do I need to do to get my hdds online again so that I can get my stuff?
December 27, 20205 yr Community Expert Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread.
December 27, 20205 yr Community Expert HBA is failing to initialize: Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: doorbell handshake int failed (line=5916) Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) Dec 26 17:59:26 Tower kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10790/_scsih_probe()! Try re-flashing it or testing in a different board if available.
Archived
This topic is now archived and is closed to further replies.