New disk added to fill gap is not an the array?

[piratx]

After I changed 2 HDDs on my unraid I stuck on the array drive selection screen after restart. But the thing is I remove 2x4TB and added a brand new 8TB to fill the gap. I chose on disk3 place the new one but the system wouldn't let me move on to start the array. 

 

So I made a new profile which did the job. After seeing that the new profile totally removed all my dockers - which is not a problem - I also saw that the Disk3 now is not in use in my array as it should. It's totally empty. 

 

 

Did I do anything wrong? Can I go back to my older profile somehow?

What I had when I booted up with the new disk:

Edited December 27, 2020 by piratx

[piratx]

Seems also that downloads from today are in there only.. so is started to copy the new ones on this disk but is that normal? Thanks in advance!

[Squid]

Unraid never moves files from old disks to new ones.  To do that, you'd want something like unbalance.

[piratx]

So everything is good with my setup. The new disk will be used for a little while now until is filled up like the others I suppose!?


Sent from my iPhone using Tapatalk

[Squid]

Yes, depending upon your allocation method, split level, include / exclude settings.

[piratx]

Great. Just hope the new profile I created didnt changed those settings I had before!
I needed to create new profile after i replaced 2 disks with one new

Thanks for replying back so quickly!